My iPod's touch screen has completely stop working; what do I do?

My iPod is older; I first got it not much after it came out (it's a second generation). So it's had a lot of wear and tear, with a small crack just under the home screen and more recently a larger one on the top left corner. But my iPod, near the end of it's life, began to freeze seemingly hourly and become slower (as expected; they only last so long). But one day, out of the blue, i was listening to music and went to unlock it to change the song; but the slider wouldn't... slide! So I restarted it, and when asked to put the passcode in, I couldn't because the touch screen was completely unresponsive. I've tried countless amounts of times- dead, while charging, fully charged- to restart it or power it off, but it won't respond! It isn't frozen though. And of course when I connected it to iTunes, it wouldn't work because I had to put my password into my iPod for it to connect :-/ Is my iPod (or more importantly some stuff on my notes that I really wish to have back) recoverable??

One the 4G iPod Touch came with a build-in mic. You need to purchase one or find the combined mic/earphones that came with the iPod when it was originaly purchased.

Similar Messages

Hi I was using my iPhone 4s like normal and all of a sudden my touch has completely stopped working I have resettled my iPhone numerous times I don't know what to do ?

My iPhone 4s touch has completely stopped working resettled numorous times still won't work

In iTunes, select iTunes Store under STORE, scroll to the bottom and change the flag (bottom right) to the country where you are.

HT201412 My iphone has completly stopped working have tried holding the sleep wake buttons etc and an apple icon appears but then goes and nothing happens.

My Iphone 5 has completly stopped working, have tried holding the sleep wake buttons etc but still no responce, there is an apple icon that appears but it then just goes agsin, any ideas.

see here
http://support.apple.com/kb/HT1808

My HP Pavilion g6 has suddenly gone slow and the mouse has completely stopped working

My computer has suddenly gone slow and the mouse has completely stopped working. The keyboard works on and off. I ran an HP PC hardware diagnostics UEFI which gave me this result:
smart check: passed
Long DST: Failed
Failure ID: PLQ77T-00074B-MFPWWI-61FF03
Can anyone please help?

The hard drive needs to be replaced. Post back for purchase suggestions and installation instructions.

My iPod screen has randomly stopped working?

So a while so my iPod screen has randomly striped working. I've tried everything. Restoring didn't help one bit and I don't have enough money to go in and get it looked at and get it fixed. I have talked to an apple professional and he was telling me it was a hardware issue. I was hoping I could do something on my open to fix it. I would really love if someone can help me out on this. :)

Sure sounds like a hardware problem to me. Not really anything you can do since I suspect it is a problem with the logic board, the most expensive part of the iPod.
Apple will exchange your iPod for a refurbished one for $19 for 64 GB 4G and $99 for the other 4Gs. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following maybe less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace the screen yourself if you are up to it
iPod Touch Repair – iFixit

Adobe reader has completely stopped working

Win7 Professional 64bit, Core i7, 4GB, Reader 10.1.4.
I have been using reader for more years than I can remember. I use it
all day, every day - there is almost never a time when Reader is
absent from my desktop.
BUT... Today Adobe Reader completely stopped working. I was using it
quite happily this morning, on a PDF which I have opened dozens or
even hundreds of times. I needed to switch to another document - when
I tried to open it, (or one of about 100 others I have also opened
many times), I saw nothing appear on the screen, the cursor switched
to pointer/busy, and then cleared after about 5 seconds. The only
indication that anything happened was a blind ACRORD32.exe process in
the task list. I rebooted - same result. I uninstalled Reader and
reinstalled it from the Adobe download site. Same result. Reader is
simply no longer functioning in ANY WAY WHATSOEVER. This now happens
EVERY time.

You can try using this tool to remove all traces of previous version(s) of Reader:
http://labs.adobe.com/downloads/acrobatcleaner.html
Then, you may download the offline Reader installer from
http://get.adobe.com/reader/enterprise/

How do i fix my home button it has completely stopped working after i dropped it and now its frozen on the apple screen?

so yesterday i dropped my iphone and the home key stopped working. i had to turn the phone completely off to change screens and get back to the home page. today i turned it off to get back to the home screen and now it is frozen on the apple screen. its been like this for about an hour or so. i plugged it into the computer and it still hasnt done anything. i try to reset it but of course since the home button isnt working it wont allow me to do so.
does anyone know what to do besides taking it to apple?

You can try the steps recommended in the User Guide. If they don't work bring your phone into Apple for evaluation.
http://manuals.info.apple.com/en_US/iphone_user_guide.pdf

Touch screen L2105 always stops working after a few minutes

I have windows 8.1 and the touch screen always stops working after a few minutes- ie. the touch operation via USB, the screen itself is OK.Have tried windows switching power saving off, but no help
charsepp

Hello charsepp,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand that the touchscreen stops working after a short period on your HP L2105 Monitor. The first thing you are going to need to do is determine if this is a monitor or PC issue. To do this you should try connecting the monitor to another computer and see if the issue persists.
If the issue does not persist it is the computer, and if your computer is also HP I would be happy to assist you, but first I would encourage you to post your product number for your computer. I am linking an HP Support document below that will show you how to find your product number. As well, if you could indicate which operating system you are using. And whether your operating system is 32-bit or 64-bit as with this and the product number I can provide you with accurate information.
How Do I Find My Model Number or Product Number?
Which Windows operating system am I running? Is the Windows Version on My Computer 32-bit or 64-bit?
If the issue persists when you try the monitor on another computer then the issue appears to be a physical issue and I think it would be best if you contacted HP technical support for repair options.
US support link to contact options for HP products purchased in the US.
Outside of US support link to contact options for HP products purchased outside the US.
Please re-post if you require additional support. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

My Infinity Blade has completely stopped working. It simply dies out on the loading screen. I have tried all conventional ways of solving the problem, including restoring backups, deleting and redownloading the app, and nothing works. What do I do?

Yeah, it just crashes on the loading screen every single time, and I have no clue what to do....

Contact the developer
Restore to factory settings/new iPod
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

My MacBook was working completely fine , I've had no troubles with it. I was waitin for something to load and all of the sudden the screen just went black . I've restarted it several times and the screen has just stopped working .

My MacBook pro has been working fine but all of the sudden the screen went Fluro green. I restarted the computer by holding the start button down and evert since , every time I turn it on the screen is black . I've restarted it several times and the screen doesn't change.

Shanice4 wrote:
Im not sure what that means ?
What part of the Article that I linked you do not understand?

IPod has completely stopped working

I received my 80 GB iPod near the end of May and it's worked perfectly until now. I left it to charge over the weekend and when I tried to use it today, it said the battery was "very low." However, when I plug it into the computer to charge, the computer only recognizes it for a few seconds before giving me the "device was not removed properly" message. The iPod was making a really weird noise -- the hard drive would hum, wine, and stop. Rinse and repeat. I unplugged it and it eventually stopped making the noise.
I've tried the lock/menu+select thing, as well as resetting it on iTunes, but the latter just said there was an unknown error and neither worked.
Why doesn't my baby love me anymore?

Just bought a ipod nano for my daughter in law and same thing happened, froze up. Took back to shop and fixed in seconds.
Quite common fault! Switch on and off hold button first, then press and hold down Menu button and also press and hold down the centre button. (do this together)
The ipod then resets itself. You do not loose any music etc.
Good luck
Alan

My ipod nano 3rd Generation has just stopped working with no warning signs!

It has a black blank screen and is unresponsive to charging when plugged into a USB port and a standard USB mains powered charger that came with my iphone.
I have tried pressing the menu and centre button and nothing happens.
Please help if possible.
Thank you.

How long have you left it to charge? That is a pretty good chance that the battery may just be shot and in need of replacement.
B-rock

My flash player plugin has completely stopped working even after reinstalling firefox and flash

i have updated flash player, updated firefox, updated windows and pretty much anything i can think of . even then still i kept seeing the grey box telling me flash plugin has crashed. so i reinstalled flash and reinstalled firefox and still keep getting the same grey box saying flash has crashed

We're sorry to hear that Firefox is crashing. In order to assist you better, please follow the steps below to provide us crash IDs to help us learn more about your crash.
#Enter ''about:crashes'' in the Firefox address bar and press Enter. A Submitted Crash Reports list will appear, similar to the one shown below.
#Copy the '''5''' most recent Report IDs that start with '''bp-''' and then go back to your forum question and paste those IDs into the "Post a Reply" box.
''' Note:''' If a recent Report ID does not start with '''bp-''' click on it to submit the report.
(Please don't take a screenshot of your crashes, just copy and paste the IDs. The below image is just an example of what your Firefox screen should look like.)
;[[Image:aboutcrashesFx29|width=500]]
Thank you for your help!
More information and further troubleshooting steps can be found in the [[Firefox crashes - Troubleshoot, prevent and get help fixing crashes]] article.

Premiere Pro CC 2014 has completely stopped working (and Prelude too)

I've used it for about a week now without issue (having just wrapped a project before updating).
Tonight I imported AVCHD footage into Prelude, imported that footage into my PPro CC 2014 project, and began editing uneventfully.
The work screen suddenly vanished. The menu bar at the top of the screen is still there. The Finder window says it's still opened, but does not show any working window.
When I quit and restart, the splash screen finishes.
Then the Welcome screen appears.
I can click on my project, and it gives a quick progress meter as if it has opened it, but nothing appears.
I can create a new project, and that file will be saved wherever I put it, but nothing appears.
I read to move the Plug-in folder to the desktop. Unless I did it wrong, that seemed to do nothing.
I uninstalled and reinstalled PPro CC 2014, and the problem persists.
Help. I'm paying a big monthly chunk to you guys. If you can't give me an answer, please PM me the number of customer support whom I can call for assistance. I can't seem to find that number.

Hi Brutewolf,
You said you uninstalled and reinstalled Premiere Pro. Did you run the Adobe CC Cleaner Tool, as well? Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
Also, get a case going with support here: Contact Customer Care
The right phone number according to your region will be displayed after you click through the contact form.
Thanks,
Kevin

Ethernet has completely stopped working

Here is what happened:
This morning, my ethernet port was working just fine. I could and did connect to the internet.
I was working on my Windows side (recently installed Windows 7 from Windows XP Service Pack 3 on Boot Camp. Installed both the drivers from my original computer and the Boot Camp drivers up to 3.1)
I plugged in my external hard drive and was fooling around with a few things on it, then left it and continued to work on my computer. I wanted to safely eject the external hard drive so, I went to the eject option. It told me that a program was still using it and I was not able to eject it. When I had this problem on my Mac side, the recommendation was to simply log off and log back in and then I could eject it safely. Since that has worked on my Mac side, I tried it on my Windows side. However, after 10+ minutes of Windows "Logging me out" I got frustrated (I'm at work) and manually shut down the computer by holding down the power button.
I started my computer back up to my Mac side because I had some files on there that I wanted to put on my external hard drive. After doing so, I went back on my Windows side to find out that I could not connect to the internet. (The only way for me to connect to the internet at work is through an ethernet cable. Right now, I am using my co-worker's computer). It said that there was something wrong with the NVIDIA (SP?) ethernet program/whatever it is.
I logged back onto my Mac side and I am having the same problem, I cannot get my ethernet to connect. I tried a different port and that one didn't work either so it's not the ethernet port or the ethernet cable, it is definitely my computer.
Can I simply re-download the Boot Camp 3.1 driver and have it work again? Or is it something wrong with my ethernet jack period?
I don't understand why manually restarting my computer would have caused such a problem. I have done it before on my Windows side once and countless amounts of times on my Mac side (I have had my computer for a good 3/4 years now).
It is out of warranty which is why I came here with my problem. Hopefully someone knows how to fix it. Thanks in advance!

Disconnect all the cables from Linksys router.
Connect a computer to the Ethernet port 1 on Linksys router. Connect the power cable to the router. Press and hold the reset button on the router for 30 seconds. Release the reset button and wait for 30 seconds. Power cycle the router.
Now check the IP address on your computer.
If you are getting a valid IP address like 192.168.1.xxx then try to ping the IP address of the router 192.168.1.1 . If you get replies from the router IP address then try to access the setup page of the router.
If you are getting auto configuration IP address then assign a static IP address to the computer and then try to access the setup page of the router.
What IP address do you get when you connect the computer to the router?

My iPod's touch screen has completely stop working; what do I do?

Similar Messages

Maybe you are looking for