My ipod Says "accessorize test"

Well I turned on my ipod and it went throught alot of wierd this about testing this testing that and now it say
Accessorize test
Pleas plug FW
LCD ID: 2
FWPWR: 0
what does this mean
and how do i fix it?

It looks like the iPod diagnostic mode.
You should be able to reset the iPod to exit that mode.
See this.
How to reset the iPod.

Similar Messages

When turned on says Accessorize Test and is locked. How can I unlock and use it?

when I turned my 30gb ipod on it says accessorize Test and is locked on this screen. Any suggestions?

Reset the iPod. To do this, first make sure the hold switch is in the Off position, then press and hold both the Select (Center) and Menu buttons together long enough for the Apple logo to appear.
Somehow the iPod start up in diagnostic mode, but the reset should bring things back to normal.
B-rock

Ipod is in test mode?

I was charging my ipod via my computer/usb and whenever I went to get it, on the display screen it is a grey color and says "Accessorize Test" Please Plus USB
LCD ID: 2, FWPWR: 1, USBPWR: 0...
I can't get past this message. I have plugging it into different USB's and no luck. It somehow switched to a computer/test mode.. doesn't look anything like it did before. Help!

You may be in diagnostic mode, restart iPod.

My ipod 30GB reads---Accessorize test :( PLAESE HELP!!!!!!

PLEASE HELP ME! My ipodGB reads "accessorize test". below that it says "please plug FW, LCD ID:1, FWPWR:0" what do i do? i can not use it, or plug it into my computer...but the backlight stays on. i have tried to reset it many times. i also do not want to be charged to fix it . plaese help me, im lost without my ipod!

Interesting, the link you were given has a similar test within it but to get to it you have to reset and then when the apple logo appears hold down the centre and the rev buttons. When you do that the apple logo reverses and you get a list of tests as shown in the link you were given. I'm guessing you haven't done that?
I haven't ever seen a diagnostic test come up on screen without going into diagnostic mode but perhaps there is some simple test built in just to test accessories.
Usually with the other tests you just do whatever is asked and you get a pass or fail. You can usually exit by doing a reset where necessary or sometimes by pushing the menu button but you've probably tried that.
The other option is to do what it asks and see if you can exit by going through them.
"Please plug FW" means plug in a firewire cable, connected to something probably, so if you have one, plug it in.
LCD ID:1 simply means your screen is connected.
FWPWR:0 means that your ipod is not drawing power via a firewire connection.
If you plug in your firewire cable it should change to a 0.
It is possible that will be the end of it or alternatively you will get another screen asking you to plug in your usb cable and possibly your head phones and a remote.
Hopefully the remote test will be optional because you may not have one!
In these kind of tests a 0 means no or not present and a 1 means yes or working ok or connected.
Having written all this, probably the quickest way to find out how to stop it is to call Apple!
If you get a test for the click wheel you will need to scroll it around and around several times until it says pass or possibly in both directions.
You may get a "key test" which means just push all the buttons.
Good luck and interested to hear what happens.
John

My iPod is stuck in ACCESSORIZE TEST Mode help pleaseeeeeeee

I went to reun diagnostics, unclicked the first 2 and this was the result
Re: iTunes wont sync my iPod Classic 80 GB
Posted: Mar 27, 2010 10:02 AM in response to: b noir Reply Email
could you please respond to [email protected] also in that i read that Email daily? PLEASE?
Thank you so much
this is what tghe test results were. can you please help? it is frozen on
ACCESSORIZE TEST
please plug fw
LCD ID : 2
FWPWR : 0
i did the run diag. nest next next next this is what it said
also redid run diag again did next and next only twice. in brackets it is what it said
red dot only on {iTunes helper is not working }
and the 2nd bunch was green except for the red dot on...no iPod or iPhone found}
Microsoft Windows Vista Home Premium Edition Service Pack 2 (Build 6002)
Gateway T5062
iTunes 8.2.1.6
QuickTime 7.6.4
FairPlay 1.4.10
iPod Updater Library 8.1d19
CD Driver 2.1.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 2.6.0.32
Apple Mobile Device Driver 1.45.0.0
Bonjour 1.0.6.2 (118.5)
iTunes Serial Number 77A954A4AC937069
Current user is not an administrator.
The current local date and time is 2010-03-27 12:55:08.
iTunes is not running in safe mode.
Video Display Information
NVIDIA, NVIDIA GeForce 6150SE nForce 430
External Plug-ins Information **
No external plug-ins installed.
iPod/iPhone Connectivity Tests **
iPodService 8.2.1.6 is currently running.
iTunesHelper is currently not running.
Apple Mobile Device service 2.50.39.0 is currently running.
Universal Serial Bus Controllers:
Standard OpenHCD USB Host Controller. Device is working properly.
Standard Enhanced PCI to USB Host Controller. Device is working properly.
No FireWire (IEEE 1394) Host Controller found.
Most Recent Device Not Currently Connected:
Fifth Generation iPod (iPod with video) running firmware version 1.3
Serial Number: 8K6182HZSZA
iPhone/iPod Touch Sync Tests **
No iPhone or iPod found.
pc win vista

have you tried restarting the iPod? hit menu and the center button together until the screen turns off.

IPod stuck on Accessorize Test

Can anyone help me with this issue? This morning, I touched my iPod and the ipod went into Accessorize Test and I cannot turn the iPod off or reset the iPod.

Hello jawss,
And welcome to Apple Discussions!
This morning, I touched my iPod and the ipod went into Accessorize Test
How in the world did that happen?
Anyways, by resetting the iPod, do you mean you are pressing and holding the Center and Menu buttons together until the Apple logo appears? Have you made sure the hold switch wasn't activated as well?
If you are unable to get any sort of response from your iPod, try letting the battery completely drain. Then hook it up to your computer and charge, and once it has enough juice for iTunes to pick it up, go ahead and Restore it there.
B-rock

My daughter Ipod is looked.................. accessorize test

Her Ipod is locked......................... with an accessorize test. I pluged it into the computer NOTHING
Tried to do an update........ computer does not even know the I-pod is there. HELP HELP

Just popping in.
I was having same problem on my Ipod 30 gig color. Stuck in accessorize testing. Held center button and menu and restarted thanks for the tip. I was getting worried. I use my ipod as a portable harddrive for work.
Thanks

What the heck is Accessorize Test?

Okay.
something weird.
Something called Accessorize Test has occured to my Ipod. out of the blue, I turned it on, and it went to Accessorize Test.
I'm not sure how to fix this, I tried everything the help pages sugguest, but restarting doesn't do anything, nere do any other of the 5 R's.
it's on a screen that says:
Please plug FW
LCD ID : 2
FWPWR : 0

Hey @dg3,
Thank you for posting in the HP Support Forum.
I see that you're curious about 'automatic servicing' when reviewing what looks to be a selection from a print quality issue article pertaining to your HP Officejet Pro 8600 e-All-in-One printer. I would like to help.
Allow me to answer your question as succinctly as I'm able: automatic servicing as a printer user's troubleshooting step is essentially doing nothing but allowing time, and other automated factors to intervene in resolving a print quality issue. I'm sure that you have noticed that when you turn your printer on, it makes some startup sounds - these indicate that your printer is readying itself for the business of printing, ie. - the carriage is moving into place, the printheads are preparing themselves. Sometimes these automated functions can help resolve a printing issue. Further, in the context of the article you're reading, sometimes the combined factors of time and powercycling your printer (turning off and on) will clear up minor print quality issues.
Does this satisfy your curiosity?
Also, since you were reviewing content from a troubleshooting article, do you require any assistance with your printer beyond what you've posted? Please respond to this post with details if you have any further questions or concerns. I'm always happy to help fellow Forum users.
Thanks again for posting in the HP Support Forum and have a great day!
E-roq
I work on behalf of HP.
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

Need Help With Accessorize Test

My ipod is completely stuck on the accessorize test. The 5 R's thing doesn't work and I can't go to any other screen or turn it off. The screen says " Please plug FW ". I don't even know what "FW" is.

I am also frozen. Won't turn off stuck in a accessorize test mode, not even sure how I got here. Any help would be greatley appreciated.
Cori

Froze on Accessorize Test!!! Please HELP!!!!!!!!!!

my ipod is froze on an accessorize test and says "please plug FW"
I have no idea what that means and i have no idea how it got on that page. The screen is white with black writing. I really don't know how to fix it. It wont reset and it wont connect to my computer. It is not responding in any way.
Can someone please please please help me. What can i possibly do to fix it?

What's an "accessorize test"?
says "please plug FW"
It says that (in those exact words) on the iPod's screen?
If it's locked up with the screen ON and doing the two-button reset
http://support.apple.com/kb/HT1320
does not work (no response), just let the iPod sit disconnected until the it goes off due to lack of power. Then connect it to charge and try using it normally.
If does respond to doing a reset, but it keeps going back to an error screen, that is different from "not responding in any way." Please post back.

My screen is stuck on Accessorize test

Accessorize Test
Please plug FW
LCD ID : 4
FWPWR : 0
Screen is stuck

Reset the iPod - Press Menu and Center button for about 10 secs till the Apple logo comes ON then release the buttons.
Have a nice day.

What is an accessorize test

what is an accessorize test

It is a test available in diagnostic mode on your iPod that allows you to test the connection of accessories to the iPod usually it's dock connector port.
If you need to know how to get out of this mode, you can simply reset the device. To reset the iPod, press and hold both the Select (Center) and Menu buttons together long enough for the Apple logo to appear.
B-rock

Stuck on accessorize test menu

some how i pressed a series of buttons on my ipod and got an accessorize test menu...tried the five r with no results. Can someone help?

No worries Chris Thanks though!
I was just wondering what they were trying before!
The discussions are getting there
btabz

Stuck in accessorize test

Please Help, i am stuck in accessorize test and my Ipod classic 160g won't do anything. It won't turn on / off simply nothing. I am using Vista. As everyone, i am Totally lost with-out my Ipod. Please can someone help?? Many thanks

Thanks for all the looks, i have now found the answer and all is fixed I am sooooo happy again. xx

Stuck in Diagnostic Test/Accessorize Test

I turned on my iPod video today and I received the "Diagnostic Test" screen. I didn't know how to take it off that screen. I looked around and I clicked on Accessorize Test. Now I'm permanently stuck on that screen. It will not turn off, reset or connect to my computer when I plug it in. The backlight will also not turn off. Help? This is what the screen looks like.

After numerous times of trying the "4 R's" (see tech support) it finally reset and is now working normally. I had it plugged in to the computer using the USB cable for about and hour and must have tried the reset at least 20 times when it finally worked. Yeah!

My ipod Says "accessorize test"

Similar Messages

Maybe you are looking for