My ipod says disabled and connect to itunes

how do i unlock my ipod from being disabled

Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen        
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

Similar Messages

  • HT1386 home button dont work and it say ipod is disable and connect to itunes?

    I have a ipod and the home and power button dont work so there is button on the screen that is the home button. Now all it says is IPod is disabled connect to itunes? any help

    Place the iPod in recovery mode using one of these programs and then restore via iTunes:
    For PC
    RecBoot: Easy Way to Put iPhone into Recovery Mode
    If necessary:
    Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
    and                                           
    RecBoot tip
    RecBoot may have problems on 64X windows, then try:
    Tenorshare ReiBoot – Enter & Exit iPhone, iPad, iPod Recovery Mode with a Single Click
    For MAC or PC       
    The Firmware Umbrella - TinyUmbrella
    Installs blootware on PC too

  • My iphone says disabled and connect to itunes but when i get on itunes it says the phone needs to be unlocked or it to work

    my iphone says its disabled and to connect to itunes but when i do it says the passcode needs to be typed in and i cant type it because my phone is disabled

    Type "unable to restore" into the search bar at the top of this page and read the resulting help article.

  • My new ipod needs to unlock the message said ipod is disables and connect to itunes

    hi! i have the new ipod but i just dnt remember the password i enter so is there any way can u guys unlock

    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                          
    If recovery mode does not work try DFU mode.                         
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings         
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: How to back up
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload iTunes purchases by:
      Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • Ipod home screen says ipod is disable. Connect to itunes. I connect to itunes and a screen pops up and says ipod is locked

    ipod home screen says ipod is disable. Connect to itunes. I connect to itunes and a screen pops up and says ipod is locked

    hey just sell it to me how much and send me back a message thanks

  • I forgot my iphone's password and it is disabled now because i tried so many times to open it. Now it's saying "your iphone is disabled and connect to itunes" i connected it to itunes and clicked restore.

    I forgot my iphone's password and it is disabled now because i tried so many times to open it. Now it's saying "your iphone is disabled and connect to itunes" i connected it to itunes and clicked restore. How long will it take for my phone to restore? Is it gonna be 24 hours?

    It appears like there is maintenance or something affecting the iTunes server today.  I recommend giving it a few hours and trying again.  It shouldn't take that long to restore but from what I hear, there is definitely something going on with the iTunes server today.

  • HT201210 hi i have to reset an ipad from work which belonged to another employee and i dont have his passcode.  It says on the ipad that is disabled and connect to itunes but when i connect to itunes it says an error message saying it cant connect no pass

    hi, i have to reset an ipad from work which belonged to another employee.  It says on the screen that it is disabled and connect to itunes but when i try to connect it says error i need the passcode, can anyone help?

    You have to use recovery mode which will totally erase the iPad. Read here.
    iPad: Unable to update or restore - Support - Apple

  • My daughter forgot her passcode, so "iPod is disabled. Connect to iTunes." But iTunes refuses to connect without passcode. Now what?

    My daughter forgot her passcode and tried too many times to remember it, so now her iPod is locked with the message "iPod is disabled. Connect to iTunes." I tried connecting it to iTunes, but iTunes says it could not connect "because it is locked with a passcode. You must enter your passcode on the iPod touch before it can be used with iTunes."
    Question 1: What are we doing wrong? Why does the iPod say to connect to iTunes if it CAN'T be connected to iTunes?
    Some other threads suggest that the only option is to wipe/restore it. The problem is that she has a lot of photos she would like to rescue before erasing it. The Photostream had not been enabled on her computer, so I enabled it. Shortly thereafter, six photos appeared on her computer. But she says there are many, many more and she really wants them. We have waited weeks for more photos to appear, but no more have shown up after the first six. Why not?
    Question 2: Is there anything we can do to coax the iPod to finish sharing the rest of the photos in her Photostream?

    Disabled
    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased. You can't get info off the iPod in its present state
    iOS: Wrong passcode results in red disabled screen                         
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: Back up and restore your iOS device with iCloud or iTunes       
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        
    If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.
    All you can to to get the photos is:
    Photos
    - If they are in an iPod backup then restore from that backup. See the restore topic of:
    iOS: How to back up
    - If you used PhotoStream then try getting them from your PhotoStream. See that topic of:
    iOS: Importing personal photos and videos from iOS devices to your computer
    - Maybe from the restored iPod via How to perform iPad recovery for photos, videos
    Wondershare Dr.Fone for iOS: iPhone Data Recovery - Wondershare Official     
    http://www.amacsoft.com/ipod-data-recovery.html
    iPod recovery software to restore lost music files      
    -iPod touch Deleted Photo Recovery Tips You Should Know

  • Ipod is disabled..connect to itunes. I have connected to itunes, but what next?

    Ipod is disabled..connect to itunes. I have connected to itunes, but what next?

    See Here
    http://support.apple.com/kb/HT1808

  • HT1349 ipad displays disabled and connect to itunes. how do I go about this?

    My Ipad displays disabled and connect to itunes. How do I go about this? I have already did the home/power but still not working..Please help

    The iPad is telling you what to do. Connect the iPad to your computer and launch iTunes. You probably need to restore the device. If it was disabled because you forgot the pass code, you will have to restore using recovery mode. As long as you restore with the computer that you always sync with, you will be able to restore from your backup at the very end and you will not lose any data.
    This explains how to restore the iPad.
    http://support.apple.com/kb/HT1414
    This explains recovery mode.
    http://support.apple.com/kb/ht4097
    This explains the disabled message if you forgot the passcode.
    http://support.apple.com/kb/HT1212

  • Ipod touch says it is disabled and connect to iTunes

    My daughters Ipod Touch was dead and needed recharged.  We recharged and when we turned it on it says Ipod disabled must connect to iTunes.  We did this and nothing happened.
    THe Ipod Touch is locked up on that screen.
    Help..........Dirk

    Restore, if iTunes will let you.  Everything except the password will be restored.  Connect via cable to the computer that you use for sync.  Be forewarned that it takes a long time.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore, go into Recovery Mode per the instructions here.

  • When I tried to unlock my iPod touch which has a passcode, for some reason the passcode I put didn't work and it said 'iPod is disabled. Connect to iTunes.' . And when I did, they said due to my passcode, I couldn't connect to iTunes. What do i do?

         When I tried to unlock my iPod touch which has a passcode lock, it said my iPod is disabled and I needed to connect to iTunes.So when I connected my iPod to my PC, it said that I couldn't connect to my iPod because it has a passcode lock. What do I do now?

    omg the sixth time i did it it worked jeeej
    thank you very much guys <3 xD

  • Younger brother has forgotten his passcode..ipod says i must connect to itunes but this ipod has never been connected before..help!

    my younger brother recently got an ipod touch. since he has had it i have used my apple id to download apps for him; the ipod was never connected via wire to a computer. he has forgotten his password and the ipod is saying i must connect to itunes but i know it needs to be connected to an itunes used previously..there is no itunes used previously in this case. what must i do to reset the ipod to factory settings? thanks

    If You Are Locked Out Or Have Forgotten Your Passcode
    iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
    iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
    iOS- Understanding passcodes
    A Complete Guide to Recover Your iDevice if You Forget Your Passcode
    If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
    Try restoring the iOS device if backing up and erasing all content and settings doesn't resolve the issue. Using iTunes to restore iOS devices is part of standard isolation troubleshooting. Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition.
    Before restoring your iOS device, Apple recommends that you either sync with iTunes to transfer any purchases you have made, or back up new data (data acquired after your last sync). If you have movie rentals on the device, see iTunes Store movie rental usage rights in the United States before restoring.
    Follow these steps to restore your device:
         1. Verify that you are using the latest version of iTunes before attempting to update.
         2. Connect your device to your computer.
         3. Select your iPhone, iPad, or iPod touch when it appears in iTunes under Devices.
         4. Select the Summary tab.
         5. Select the Restore option.
         6. When prompted to back up your settings before restoring, select the Back Up
             option (see in the image below). If you have just backed up the device, it is not
             necessary to create another.
         7. Select the Restore option when iTunes prompts you (as long as you've backed up,
             you should not have to worry about restoring your iOS device).
         8. When the restore process has completed, the device restarts and displays the Apple
             logo while starting up:
               After a restore, the iOS device displays the "Connect to iTunes" screen. For updating
              to iOS 5 or later, follow the steps in the iOS Setup Assistant. For earlier versions of
              iOS, keep your device connected until the "Connect to iTunes" screen goes away or
              you see "iPhone is activated."
         9. The final step is to restore your device from a previous backup.
    If you can not restore your device then you will need to go to recovery mode.
    Placing your device into recovery mode:
    Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
         1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the other end
             of the cable connected to your computer's USB port.
         2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the
             red slider appears, then slide the slider. Wait for the device to turn off.
              If you cannot turn off the device using the slider, press and hold the Sleep/Wake
              and Home buttons at the same time. When the device turns off, release the Sleep/Wake
              and Home buttons.
         3. While pressing and holding the Home button, reconnect the USB cable to the device.
             The device should turn on. Note: If you see the screen pictured below, let the device
             charge for at least ten minutes to ensure that the battery has some charge, and then
             start with step 2 again.
         4. Continue holding the Home button until you see the "Connect to iTunes" screen.
             When this screen appears you can release the Home button.
         5. If necessary, open iTunes. You should see the following "recovery mode" alert:
         6. Use iTunes to restore the device.
    If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
    Additional Information:
    Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information.

  • HT1320 What if locked your iPod touch up and it says Ipod is disabled please connect to iTunes but what if u just want to reset it

    Does anyone out there know how to unlock an iPod touch that says you have to connect to iTunes but I want to reset it you know so all of your data is gone but I just want to get out of unlock

    Do as the manual says to do and restore it.
    If you are unable to restore, then do this:
    iOS: Unable to update or restore

  • HT201263 i need some help trying to reset everything on my ipod but i dont know how and it wont let me do anything because it said that it is disabled and connect to itunes

    it wont let me do anything but just let me look at the screen and it saying ipod disabled connect to itunes

    Disabled
    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                         
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: How to back up     
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        

Maybe you are looking for

  • BSEG Table takes more time

    Hi Experts, Users raising bill using MIRO it takes more time when i check throuh SM50 and st03 i found that the  data fectching from the table BSEG takes more time kinldy let me know whether i need to increase table parameter.....size if so how can i

  • Any facility in Cocoa for word completion?

    I'm looking for some interface to the Mac OS dictionary, with the goal of being able to get a list of words which match a basic expression. For example: asking for words that are 5 characters long that match the form sh_. Feature useful for suggestin

  • Depreciation Error in AFAB : asset posting not completed

    Hi All Depreciation run was not finished for past 3 years before that one of the Scrapping Asset was posted without execute the depreciation run.  For that reason we are unable close the period in asset depreciation run by using transaction code AFAB

  • Pre condition functions export

    I have another question. I have tried to export pre conditions but have not succeed yet in exporting the Pre Condition functions. The  jcs_describe.describe doesn't work with the following types 'PRE_CONDITION', 'PRECONDITION', 'FUNCTION', etc. Since

  • Unable To Start iChat

    Just got my spaning new quad g5 but iChat wont start. Click on the icon, nothing. Sometimes the inital welcom screen appears then promptly dissapears. Anyone any ideas ?