MY IPOD SAYS IT HAS VIDEOS BUT NO VIDEOS ARE ON IT

MY 5TH GEN IPOD SAYS IT HAS 99 VIDEOS IN THE ABOUT SECTION OF SETTINGS.I DO HAVE VIDEOS THAT I BOUGHT AND THEY WORK JUST FINE.I CHECKED THE FORMAT OF THE VIDEO PODCASTS I HAVE AND THEY ARE GOOD.THEY PLAY PERFECTLY ON ITUNES BUT I CANT SEE OR HEAR THEM.I DONT EVEN HAVE A LISTING IN MY POD FOR THEM.HAS ANYBODY ENCOUNTERED THIS PROBLEM BEFORE? DOES ANYBODY HAVE A REMEDY?
  Windows XP  
  Windows XP  

thankx

Similar Messages

  • I dont understand why my ipod says it has 8gb but holds 6.36gb capacity and it always says over capacity by 35.4mb and i deleted lots of my apps but it keeps doing the same thing soo annoying .

    I dont understand why my ipod says it has 8gb but holds 6.36gb capacity and it always says over capacity by 35.4mb and i deleted lots of my apps but it keeps doing the same thing soo annoying . ANYONE KNOWS WHY?!

    I had a similar problem and after deleting endlessly...and weeks of frustration I (without even realizing what I was on to) deleted my text messages. I had been letting them add up since it seemed easier to text someone if it were readily available. Needless to say, I ended up with nearly double the space/memory available.

  • My Ipod says it has music but I can't see it!

    Help. My wife plugged her ipod into my computer to recharge it and then downloaded music off itunes. When I plugged in my ipod later it thought my ipod was hers, and now I can't access any of the music I had on it before. It says that 3.8 GB are full, but I can't see any of the music on my ipod or itunes. What do I do?
    Thanks,
    Shawn

    Try restoring your iPod, this will erase the hard drive, reload the software and put it back to default settings so be sure you have all your songs backed up in iTunes. Once the restore is complete it should connect to iTunes and you can begin updating your songs onto the fresh installation: Restoring iPod to Factory Settings

  • IPod Classic 80GB - "iTunes library cannot be saved you do not have enough access privileges for this operation" It says it has synced but it hasn't. Help please I am not very tech minded

    iPod Classic 80GB. Message reads ' iTunes library cannot be saved you do not have enough access privileges for this operation'.  It says it has synced but it hasn't. Please help, I am not very tech minded.

    See this article about troubleshooting the error message regarding access privelages.  It may be preventing your iTunes library from being able to save/retain music you have recently imported to it, which may explain why no new content is being added to your device.
    Trouble adding music to iTunes library or importing audio CD
    B-rock

  • A few days ago i small piece of plastic got stuck and subsequently fell out the charger hole of my ipod classic, although it still connects to itunes and syncs itunes says it has synced but there is nothing on my ipod! Nothing seems to work! HELP! :/

    A few days ago i small piece of plastic got stuck and subsequently fell out the charger hole of my ipod classic, although it still connects to itunes and syncs itunes says it has synced but there is nothing on my ipod! I have done this a few times and nothing seems to work! HELP! :/

    Transfer all of your content to the computer:
    Tunes Store: Transferring purchases from your iPhone, iPad, or iPod to a computer
    http://support.apple.com/kb/HT1848
    Then try turning the device off and on again. I'd leave it off for 10-15 minutes, but that is up to you:
    http://support.apple.com/kb/HT1430
    If the item is still there, you may need to restore the device:
    http://support.apple.com/kb/HT1414
    Hope that helps . Worst case scenario, you may need to write into iTunes support to see if they can also help!!

  • My WiFi has a problem my ipod says it is connected but when i go to apple store it does not work

    my wifi has a problem . my ipod says it is connected but when i got to apple store it does not work

    http://answers.microsoft.com/en-us/mac/forum/macoffice2011-macword/disk-full-and -much-more-misery/e9dabe09-7392-4f67-848b-c09cb1adb364

  • I have a generation 3 given to me, have cleared back to factory settings but unable to download my music from itunes, it says it has synced but no music appears

    I have followed the instructions to download from iTunes, however iTunes seems to be syncing to an ipod called prior ipod, it says it has synced but no music on ipod. when I try to follow instructions it directs you to summary screen on iTunes on ipod however I cn not find this screen as on iTunes on ipod it just goes into iTunes shop
    help?

    Does iTunes see the iPod?
    Was the iPod previous synced to another iTunes library/computer?
    Have you successfully synced from this iTunes library/computer before?
    If so have you done anything like update iTunes on the computer since it last successfully synced?
    Do the songs play in iTunes?          
    Does any media now sync to the iPod?
    Do you have the right boxes checked to sync?
    iTunes: Syncing media content to iOS devices and iPod       
    Try syncing using the manual method                
    Managing content manually on iPhone, iPad, and iPod
    Backup the iPod to iTunes and restore from backup         
    iOS: Back up and restore your iOS device with iCloud or iTunes

  • TA44551 Just recently my ipod nano's battery seemed to stop working? I plug it into a charger, the ipod says it's charged, but when I take it off the charger, the screen goes black. What's going on? How can I fix it?

    Just recently my ipod nano 4th generation's battery seems to be messed up? I plug it into the charger and the ipod says it's charged, but when I take it off the charger, the screen goes black. What is going on and how can I fix it? I'm really sad because it happened so suddenly.

    Yes.  The battery appears to be shot and in need of a replacement.  This can either be done by Apple or a third party repair company.
    http://www.apple.com/support/ipod/service/prices/
    You can Google "iPod battery replacement" for third party service centers.
    B-rock

  • After exporting to quicktime file, the file has sound but no video, what am I doing wrong?

    after exporting to quicktime file, the file has sound but no video, what am I doing wrong?  The self contained movie box is not checked.

    Hi
    Did You go via Compressor ?
    Did You use QuickTime Conversion ?
    I don't
    I do
    • In TimeLine set In and Out-Points to the full Movie/Project
    • Select ALL - Clips and Audio
    • Go up to Sequence and down to Render Only - down to Mix Down Audio
    • then Sequense and Render Selected - Both (Video and Audio)
    • then Export and as QuickTime .mov (NOTHING ELSE)
    • I use to do - Not Self-Contained as it saves both time and space
    Your Start-Up (Mac OS) Hard Disk - Needs lot's of free space to work OK - I never go under 25Gb free space on this one,
    Good Luck - Yours Bengt W

  • I downloaded the new version of Mozilla and tried to install an add-on to allow me to set the home page for new tabs. The app says it has downloaded but does not open new tabs as my home page (google) - any suggestions what I can do?

    I downloaded the new version of Mozilla and tried to install an add-on to allow me to set the home page for new tabs. The app says it has downloaded but does not open new tabs as my home page (google) - any suggestions what I can do?

    I've been working on this all day!!! I've tried everything I know of and can't get it to load either. Sounds like lots of people are having problems. Here is what I have so far...I have uninstalled EVERYTHING on my pc from apple and reinstalled itunes to no avail. I have tried all sorts of things I've read as fixes online. NOTHING has worked. Here is something interesting that i have noticed though. my main pc (which is the one i have always managed my itunes account with for years) is a 32 bit system running windows 7. Yesterday I installed itunes for the first time on my new netbook which is a 64 bit (windows 7) system and it works just fine. i have three other laptops (all window 7) in my household that are all 64 bit operating systems and ALL have updated to 10.5 and THEY ALL work fine. this is FOUR 64 bit systems ALL updated w/10.5 that work and ONE that is a 32 bit that will not. Can't get any help from apple. their suppot *****! I want to get someone on the **** phone or a live chat but cant. *** APPLE????? please let mw know if you find SOMETHING i can try next. I'm out of ideas and patience!

  • Where is my book I paid for it says it has downloaded but I can't find it

    How do I find a audio book I have purchased it says it has downloaded but I can't find it

    Did you look in the Music app? Tap on the More tab at the bottom and see if it is in there.

  • My Mac book pro won't charge. But the connector is plugged in and shows that its charging but it says it has 0% but if I unplug it it will shut off

    My Mac book pro won't charge. But the connector is plugged in and shows that its charging but it says it has 0% but if I unplug it it will shut off. It's been like this all day but I didn't notice till I turned it on.

    It's either a power adapter issue (not likely) or (more likely) a power supply problem on your MBP. Take the machine into your local Apple Store or an AASP and have them diagnose the problem.
    Good luck,
    Clinton

  • Burned dvd has audio but no video

    Anyone ever have this problem:  Burned a DVD from imovie and it works on the mac.  When trying to play on dvd player, it has sound but no video.  Anyone?

    First thing you might do is in iDVD, use the menu option to "Delete encoded assetts" in case the previous garbage from the last project or burn is messing things up. If that doesn't work here are my standard list of things I do when I have issue or even just before I go to burn a new project...
    Run Cache Out X (free download) to clear all system and application caches.
    Run MacJanitor (free download) to do all the Unix Cron Maintenance scripts.
    Run Disk Utility (Applications -> Utilities) and repair disk permissions on your start up drive (typically your internal drive). Also verify any other drives mounted on the system.
    Run Preferential Treatment (free download) to check for corrupt/damaged application and system preference files.
    Reboot your Mac.
    Patrick

  • HT4174 Not sure what I did but projects are not showing up in the video window as i skim... Event footage does but project footage has sound but the video screen is gray... Hwo do I get the vido to show in the viewer?

    Not sure what I did but projects are not showing up in the video window as i skim... Event footage does but project footage has sound but the video screen is gray... How do I get the vido to show in the viewer?

    So you can ping and nslookup from your ms to these agents and vice versa right?  I wouldn't do a manual install, I would push the agent from the management server.  You can uninstall the agent manually, or use cleanmom to get rid of them.  Then
    do an install from the console.  When you initiate the install from the console (management server), should it run into any issues it will dump out an error which will give you an idea of where the problem may be.
    From Holmans post on this:
    e MOM Server could not execute WMI Query "Select * from Win32_OperatingSystem" on 
    computer “servername.domain.com” 
    Operation: Agent Install 
    Install account: DOMAIN\account 
    Error Code: 800706BA 
    Error Description: The RPC server is unavailable.
    The MOM Server could not execute WMI Query "(null)” on 
    computer “servername.domain.com” 
    Operation: Agent Install 
    Install account: DOMAIN\account 
    Error Code: 800706BA 
    Error Description: The RPC server is unavailable.
    8004100A 
    800706BA
    1.  Ensure agent push account has local admin rights 
    2.  Firewall is blocking NetBIOS access.  If Windows 2008 firewall is enabled, ensure “Remote Administration (RPC)” rule is enabled/allowed.  We need port 135 (RPC) and the DCOM port range opened for console push through a firewall.  
    3.  Inspect WMI service, health, and rebuild repository if necessary 
    4.  Firewall is blocking ICMP  (Live OneCare) 
    5.  DNS incorrect 
    http://blogs.technet.com/b/kevinholman/archive/2009/01/27/console-based-agent-deployment-troubleshooting-table.aspx
    Regards, Blake Email: mengotto<at>hotmail.com Blog: http://discussitnow.wordpress.com/ If my response was helpful, please mark it as so, if it answered your question, then please also mark it accordingly. Thank you.

  • I would like to put a video in an other video,but the video (if want to inscrust for example in an IPad screen on this video) will follow, in 3D  and automatically the moves of the IPad (here). I remember I found 2 months ago a plugins on the Internet but

    I would like to put a video in an other video,but the video (if want to inscrust for example in an IPad screen on this video) will follow, in 3D  and automatically the moves of the IPad (here). I remember I found 2 months ago a plugins on the Internet but I can not anymore find it. Who can help me? Thanks

    I think you might mean Slice X. I think it has a motion tracker.

Maybe you are looking for