My ipod screen brightnees is at its full and then goes as low as it can go

when i unlock my ipod its at full brightness and when i play a app the brightness darkens

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings      
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:                                 
iOS: How to back up           
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar          

Similar Messages

  • The screen on the top gets distorted and then goes back normal like every 15mins

    the screen on the top gets distorted and then goes back normal like every 15mins

    try a pram reset,
    Mac OS X 10.7 Help
    Reset your computer’s PRAM
    A small amount of your computer’s memory, called “parameter random-access memory” or PRAM, stores certain settings in a location that Mac OS X can access quickly. The particular settings that are stored depend on your type of Mac and the types of devices connected to it. The settings include your designated startup disk, display resolution, speaker volume, and other information.
    Note: To print these instructions, open theHelp Viewer’s Action pop-up menu (looks like a gear) and choosePrint.
    Shut down the computer.
    Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Immediately press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.Continue holding the keys down until the computer restarts, and you hear the startup sound for the second time.
    Release the keys.
    Resetting PRAM may change some system settings and preferences. Use System Preferences to restore your settings.
    Open
    AppleSupport article: Resetting your Mac’s PRAM and NVRAM
    AppleSupport article: Mac OS X: What’s stored in PRAM?
    Keywords: khelp kmosx7

  • My ipod is skipping songs on its own and then it just stops playing all together.... any suggestions on how to fix it

    i noticed that my ipod touch has been skipping songs on its own. it starts on one song then itll play the next then skip 4-10 songs then stop all together. ive tried resetting my ipod but it seems to do nothing. i need help please???

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Unsync all music and resync
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up           
    - Restore to factory settings/new iOS device.
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar          

  • After I startup the screen is pefect for a second and then goes blueish.

    imac G5    
    imac G5    

    Could you please be a bit more specific. Which model iMac do you have and what exactly happens?
    Miriam

  • When i open my macbook pro- the screen lights up and then goes black-

    When I open my Macbook pro- the screen lights up and then goes black- keybook stays backlite- can not get screen to come back on. Must reboot-
    thoughts-?? Macbook is 6 months old and on second hard drive ( failure after 45 days).

    Hey! exact same thing happens to me... I use the keyboard shortcut to turn off the screen which is ctrl - shift - eject button. Then just poke a key and it wakes up again fine, it doesn't fix the problem but at elast you don't have to reboot. x

  • Ipod have 22,773,688 minutes. someone stole ipod got it back but its lock and cant get into it.help

    My ipod has 22,773,688 minutes. Someone stole ipod got it back but its locked and cant get in it?

    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                          
    If recovery mode does not work try DFU mode.                         
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings         
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: How to back up
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • In i photo when double clicking on a photo to get it full screen it briefly comes full screen and then goes off and all i get is a large exclamation mark why is this happening? please help

    in i photo double clcking on a photo   it comes full screen briefly and then goes off and   a 
    exclamation mark appears

    iPhoto rebuild database:   https://support.apple.com/kb/HT2638
    Sometimes it's a file problem that is automatically loaded when the program launches, like iPhoto for instance, you'll have to do a tedious process of elimination to find the culprit, like a corrupt picture in a huge iPhoto Library folder.
    One can right click on the iPhoto Library and "show package contents" to access the Originals folder containing one's original photos.
    ..Step by Step to fix your Mac

  • Im Trying to re-Activate my ipod touch cause i have just restored it and on my ipod screen it has connect to itunes and on itunes i get a message "We are unable to activate at the moment please try again later" somthing like that please help :(((

    Im Trying to re-Activate my ipod touch cause i have just restored it and on my ipod screen it has connect to itunes and on itunes i get a message "We are unable to activate at the moment please try again later" somthing like that please help :(((
    HELP!!!!Zoom in to read please

    but can not be unlocked
    If the phone was NOT unlocked, it can't work or be activated with any other carrier than AT&T.  It CAN'T be used with Tigo or Movistar.
    Your post makes very little sense.  Maybe you can get some help with English. 

  • I downloaded songs on itunes, when I go to sync it to my ipod it "says" its syncing and then it shows up on the capacity bar but there are no songs on my ipod

    I downloaded songs on itunes, when I go to sync it to my ipod it "says" its syncing and then it shows up on the capacity bar but there are no songs on my ipod

    In itune did you play any of the songs downloaded. If so plug your ipod back in an manualy check off to sync all music. If that doesn't work you might have to restore the ipod.

  • My sons ipod shows the apple sign and then occasionaaly a white screen appears and then goes back to the apple symbol.. He cant get it to turn on

    my sons ipod shows the apple sign and then occasionaly a white screen appears and then goes back to the apple symbol.. He cant get it to turn on.. He has tried charging it.He also held down the sleep/wake button and the home button at the same time to reset it.  we need help

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • Screen on ipod touch freezes and then goes white.

    Screen on ipod touch freezes and then goes white. Ihave restarted it and restored it but it didn't work. Anyone know what is wrong with it and how it can be fixed?

    If you restored to factory settings/new iPod via iTunes (Not via Settings>General>Reset>Erase all Content and Setting) and still have the problem that indicates a hardware problem.
    Make an appointment at the Genius Bar of an Apple store..
    Apple Retail Store - Genius Bar

  • Okay, my ipod touch has a cracked screen but it worked completely fine and then my ipod had a short in it to the point where i couldnt listen to music. i tried sending it back cause it was under warranty but they said they couldnt do anything.

    okay, my ipod touch has a cracked screen but it worked completely fine and then my ipod had a short in it to the point where i couldnt listen to music. i tried sending it back cause it was under warranty but they said they couldnt do anything. so what now ? could i pay a lower price to get another ipod because if so i will .

    Make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
      Apple Retail Store - Genius Bar              

  • Whenever i try to update my ipod touch to ios5 it finishes its deal and then it says error and that it timed out and to check my connection

    whenever i try to update my ipod touch to iOS 5 it downloads and then it say error timed out and to check my connection it is making me really mad and i'm tempted to take it back

    i made sure my itunes was up to date

  • When i open itunes its normal and then out of nowhere it says "itunes has stopped working" and i have to click 'close program'. help?

    when i open itunes its normal and then out of nowhere it says "itunes has stopped working" and i have to click 'close program'. help?

    Having the same issue here....a quick fix is to just minimize the window, and immediately maximize it.  It will now fit the screen.  Trouble is, after you close it, you'll have to do it again when you re-start itunes.  The good news is it takes all of about 2 seconds.  Apple should fix this.  Should.

  • I have a 27" iMac with 16GB of factory installed SDRAM and 1T harddrive.  It is telling me the harddrive is full and is not functioning correctly.  How can I adjust so that all files are managed on the harddrive rather than the SDRAM.  (BTW - design flaw)

    Processor 3.4 GHz Intel Core i7
    Memory  16 GB 1333 MHz DDR3
    I have a 27" iMac with 16GB of factory installed SDRAM and 1T harddrive.  It is telling me the harddrive is full and is not functioning correctly.  How can I adjust so that all files are managed on the harddrive rather than the SDRAM.  (BTW - design flaw here.)
    Older Macs with a single Harddrive would simply expand OS management on the drive, and I think I understand the new Fusion Drive to do just that, but how do I get this product that I spent a great deal of money on to be more than a pretty screen?

    I was confused by this statement
    It is telling me the harddrive is full and is not functioning correctly.
    OS X manages ram and when you run out, it create swapfiles to extend your ram on the HDD (Hard Disk Drive). The OS itself, takes about 16 gig of space and that too resides on the HDD.  Your 16 gig of RAM is really a temporary space that holds things from the HDD so the processor can work on them.  There is no design flaw between your ram and HDD.  Something else is going on and there are a lot of smart people here to help you figure out what that "something else" is.
    I would do three things.  First I would create a backup, backups are important.  Second, I would reboot into recovery and repair my HDD.  Lastly while still booted in recovery I would repair permissions.
    Can you capture a screen shot of the exact error you are getting?

Maybe you are looking for

  • F4 help for month and Year field in ztable please

    I have created a ztable.  The first field in my ztable is a primary key field and it holds MM/YYYY(eg.  08/2011). How ever my requirement is when ever we want to see the output, uer wants F4 help on that fields and when he selects the range , the zta

  • Excise Duty on Assessable Value in PO

    Dear Friends, The scenario is that weu2019re purchasing material from an outside vendor & therefore creating a PO for that. Now in this scenario the Purchasing Value is different (say e.g Rs 10,000), but excise duties have to be calculated on the Ass

  • How to remove the installed JDeveloper Update causing error

    Hello there, I install some webcenter available updates this morning...after restarting the JDeveloper11gR1 I am experiening error. Can someone tell me how to remove the newly installed update so that I do not experience this errors again?

  • VPN L2TP fails to establish connection

    I have been working on this issue for about 7 hours now, and getting pretty tired of it. I went to enable L2TP on a server, and nothing i do gets past this: Wed Jun 30 21:21:14 2010 : Directory Services Authentication plugin initialized Wed Jun 30 21

  • How do I get rid of the Java Script Application that keeps popping up and saying 'invalid XMC value'?

    Every time I click to add something to a message, this pops up. It is very irritating and I have no idea where or how it came from as it just started today.