My iPod screen went blue?
I had replaced my iPod in 2013, due to a bad battery, and liquid damage, and I got my new one, had it for a few months, and updated to iOS 7 betas. I then went to 7.0.2, and then 7.1, after noticing some iPhone 5 apps loading like an iPhone 4s. Anyways, my battery was on a dock, and then, I get red lines on the bottom 1/4 of the screen, and blue lines on the other 3/4 then, the colours intensified, and my iPod died. There is no damage on my iPod, except a few scratches and a dent on 1 corner, that doesn't stifle use. Anyways, my iPod is a brick. My iPhone, and iPad do nothing of the sort.
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
Similar Messages
-
I was adding music and getting ready to sync so I plugged in my iTouch and the screen went blue and the apple logo came up with looks like a download line but nothing is downloading, How do I fix this??
Try iPod touch troubleshooting. http://www.apple.com/support/ipodtouch/assistant/ipodtouch/
-
IPods screen went black but assisted touch on screen still works?
IPods screen went black but assisted touch on screen still works? What's would be wrong?? I have dropped it and the lower volume button went partly in side the IPod (thats why i had the assisted touch on) and its been working very slowly fore the last week or so. but other then that it was fine.
With the information given, If the screen is completely black even after the reset, it's sounds as a hardware issue
Could be : The battery
The charger
The phone itself
You can narrow these down one by one preferably.
-If you have an extra battery, test it.
-Try another charging cable or another outlet
If neither of those affect it, you can also wipe the phone, but that's pretty much the last last step you should do since it erases everything. Then restoring it. Time varies.
If you are still having trouble, contacting your carrier, the closest Apple Store, or the technical support line for Apple. -
My iPad 2 fell the screen is shattered and the screen went blue. what is my best course of action? Repair it or just get a new one?
Apple's Limited Warranty http://www.apple.com/legal/warranty/ for iPad excludes coverage for damage resulting from accident, disassembly, unauthorized service and unauthorized modifications.
Out-of-Warranty Service
If you own an iPad that is ineligible for warranty service but is eligible for Out-of-Warranty (OOW) Service, Apple will replace your iPad with an iPad that is new or equivalent to new in both performance and reliability for the Out-of-Warranty Service fee listed below.
iPad model
Out-of-Warranty Service Fee
iPad mini
$219
iPad 3rd, 4th generation
$299
iPad 2, iPad
$249
A $6.95 shipping fee will be added if service is arranged through Apple and requires shipping. All fees are in US dollars and are subject to local tax.
Certain damage is ineligible for out-of-warranty service, including catastrophic damage, such as the device separating into multiple pieces, and inoperability caused by unauthorized modifications. However, an iPad that has failed due to contact with liquid may be eligible for out-of-warranty service. See http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipad
Make a Genius Bar Reservation
http://www.apple.com/retail/geniusbar/
You may can get the iPad repaired at 3rd party repair sources for less $, however, any remaining Apple warranty will be voided.
iPad Repair & Screen Replacement Services
http://www.ifixyouri.com/16-ipad-repairs
RepairZoom iPad Repair
http://www.repairzoom.com/ipad-repair.html
Mission Repair
http://www.missionrepair.com/Apple_iPad_Repair_Services_s/431.htm
iGadgetResQ
http://www.igadgetresq.com/ipad-repair/
Cheers, Tom -
HT4061 Screen went blue . Phone turned off and never turned back on
SCreen went blue. Phone turned off and never turned back on
What to do if your iPhone will not turn on
-
My ipod screen went white and it says i should go into recovery mode but it wont let me do those steps after i hold the home and button at the top it wont go to the slide to power off can someone help
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Im a new user to Mac and have had my mac pro for 3 weeks, tonight the screen went blue and wouldnt do anything, i had to turn it off to clear it and wondered if anyone could shed some light as to why, I cant remember if I was looking at FB or my usual footie forum.
OK, well it's possible it wasn't anything to worry about. BTW I'm in the US so I'm guessing by FB you mean Football or what we call Soccer.
As far as the updates I would recommend running Software Update about once per week. You can set your computer to do this automatically in System Preferences - Software Update and then make the change to your preference.
If you get a similar crash you should then begin using Activity Monitor (Applications - Utilities- Activity Monitor) and see if any apps are using up too much RAM or if anything is taking too much % CPU. If you can't spot anything then immediately call AppleCare (number is in your manual), you have 90 days of free phone support or if you purchased AppleCare that is extended to 3 years as is your warranty. -
My IPod screen went white and I can't do anything on it. Is it like a virus?
My IPod screen went white and I can't do anything on it. Is it like a virus? I need some help.
See Display Shows White Screen Here
http://support.apple.com/kb/TS2771
If no joy... Try letting the Battery Fully Drain... Then Charge the Device for at least 30 Minutes... -
Since being returned from service my iPod click wheel's screen goes blue when using the mains charger. Nothing else shows. I do not even know if it is charging. I think perhaps not. Does anyone know how to get rid of this blue screen or what causes it?
Hey Buzzy Bee Jen,
I just got back from the Genius Bar. My problem turned out to be a bad AC adapter. They swapped it out for a new one. I asked my Genius if he's seen 'blue screen' problems before. He said that this was the first time he saw a bad power supply cause the problem, but he's seen it twice before. Both times the culprit was a piece of lint or aluminum gum wrapper stuck in the 'dock adapter' (the slot on the bottom where you plug the firewire, etc). He says this can happen when people carry the iPod around in their pocket.
Hopefully this helps you resolve your problem. -
My 4th gen. IPod screen turned blue and won't connect to iTunes.
I was playing on some apps and while doing so my ipod screen turned white and then turned completely blue. I tried connecting it to iTunes and trying to restore it but it didn't work! My ipod wasn't connecting to iTunes! I have tried some different ways like trying to shut it off completely but it's not really showing anything. Does anyone have any suggestion to fix it or should I just try to get a new ipod?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
My second generation iPod Nano screen went completly blank. It plays, lights up, but I'm unable to read anything...100% white. Has anyone confronted this issue before? Could it be battery related? Suggestions for solving this would be greatly appreciated. Thanks,
dieo99daniel wrote:
My second generation iPod Nano screen went completly blank. It plays, lights up, but I'm unable to read anything...100% white. Has anyone confronted this issue before? Could it be battery related? Suggestions for solving this would be greatly appreciated. Thanks,
Please describe in detail all you have attempted to do in order to resolve the issue. Don't want to repeat what you have already tried. -
My iphone 5 screen went blue but still on. can someone helpme?
my iphone 5 screen went black a few minutes later it was working again, the day after it just went blue but my iphone still working , 2 days have gone and nothing happened. what to do?
Hello, jaimerodgz.
Thank you for visiting Apple Support Communities.
Here is a resource that may provide some troubleshooting steps to help with this issue. See the section related to the iPhone display.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
If all troubleshooting steps have been processed, I would recommend taking a look at the section labeled Issue not resolved.
Cheers,
Jason H. -
Ipod SCREEN WENT WHITE ??? ANY ADVISE? PLEASE!!!
a friend of mine just give it to me... i put it on charche with the usb port on pc... it was working perfeclty, i could see the apple, than the flashing ( do not unplug ) the screen was working, the menu too. all the funcions were ok... just happen that we lost power for few hours .. the pc turned off ( i wasn't home .. and when i came back i realized that my ipod screen was FULL WHITE...WATH I CAN DO NOW? SOMEBODY TOLD ME TO FULLY DECHARGE IT THAN PLUG IT AGAIN.. THE OLD OWNER SAID HAPPENED TO HIM BUT AFTER 2 DAYS IT CAME BACK NORMALLY,,, I TRY TO RESET LIKE PUSHING THE CENTER BUTTON AND MENU BUTTOn AT THE SAME TIME DIDN'T WORK ANY OF YOU COULD HELP ME PLEASE? I NEED TO HAVE CONTROL CAUSE IS INSTALLED ON MY MOTORCYCLE AND WITH A WHITE SCREEN I CAN'T' DO NOTHING........
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
screen went white, then turned blank and will not respond to the buttons i touch. it is also able to open up now somehow, so i can see the inside
Let the battery fully drain. After charging for at least an hour try:
iOS: Not responding or does not turn on
If not successful time for an appointment at the Genius Bar of an Apple store. -
Can somebody help me? When i first turned on my MacBook, it never booted up and ultimately the screen went blank. The battery is fully charged and now when I depress the start-up button, nothing happens. Its worth noting that when I close the lid, the sleep light turns on. Thank you in advance for your help. PMB
hi,
try inserting the cd install to boot on diagnostic
Press D during startup
take an apointment with applestore
regards
Maybe you are looking for
-
Webutil_Host and Client_Host
Hi, I am wondering what is the difference between Webutil_host and Client_host? I am trying to call sqlplus.exe located in the server and run a text file in the client side. I am wondering if I use webutil_host or client_host? Thanks in advance!
-
I'm looking for a report that shows, by payment run, what discounts were taken and/or missed. Does anyone know an existing report or query that will provide this?
-
Hi, I have an xml in a blob column and I need to extract the xml resultset into the (specified below) row/column format. So that i created a custom blob_to_clob function for this conversion and extracted below specified xml. Now I am executing t
-
Counter in mapping: + '001'
Hi, I'm trying to use the counter function in my message mapping but I don't want XI to count +1 (so: 1, 2 ,3,...) I would like to count with 001 (so 001, 002, 003 ,004,...) but it doesn't seem to work. Is this possible with the standard mapping faci
-
CC Acrobat Fails to complete install. Stops at 43%. Attempts 4X.
CC Acrobat Fails to complete install. Stops at 43%. Attempts 4X. Help.