MY IPOD SHOWS A BLANK WHITE SCREEN

i have rebboted my ipod on i tunes but i still have a blank white screen

- Did you try resetting the iPod:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Next try restoring from backup
- Then restoring to factory defaults.new iPod.
- Last, make an appointment at the Genius Bar of an Apple store since you likely have a hardware problem,
If iTunes does not see the iPod, see if placing the iPod in recovery mode will make it visible so you can restore the iPO\od. For recovery mode see:
iPhone and iPod touch: Unable to update or restore

Similar Messages

My Ipod 3rd generation wont turn off and is showing a blank white screen someone please help

My Ipod 3rd generation wont turn off and is showing a blank white screen someone please help! xx

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Frozen video ipod on a blank white screen, tried alot of things please help

i have read through and tried all the suggestions that i saw. and nothing worked. my ipod has a blank white screen, and every time i reset it. it goes back to that white screen and makes a little noise on its own without headphones plugged in or anything. my mac does read that it is there. so i can't do any updates or anything help me please!

Welcome to Apple Discussions!
If your mac recognizes it, try restoring it...
Restore iPod
If it doesn't recognize it, try putting it into Disk Mode and then restore it...
Putting iPod into Disk Mode
btabz

My ipod has a blank white screen and wont change no matter what i press or try.. what should i do?

my ipod has a blank white screen and wont change no matter what i press or try.. what do i need to do?

Try here:
iOS: Not responding or does not turn on
If you can't turn it off, let the battery fully drain. After charging for at least an hour try again.
If still problem that indicates a hardware problem an an appointment at the Genius Bar of an Apple store.

Why is that whenever there's a power outage or whenever I restart my computer sometimes my iMac wont completely load up? It will just show a blank white screen. It will do that for a few days until it decides to fully load up.

Why is that whenever there's a power outage or whenever I restart my computer sometimes my iMac wont completely load up? It will just show a blank white screen. It will do that for a few days until it decides to fully load up.

First step would be a PRAM reset.
http://support.apple.com/kb/ht1379
Post back if that does not work.
The next step would be to try "Repair Disk".

My ipod has a blank white screen, help!!!

I just got a ipod video from my wife and it has a blank white screen and it does not show up on the scroll bar help me goin on a week long trip tomarow need help now.

Welcome to Apple Discussions!
Try the steps listed here...
Fifth Generation iPod has a blank backlit display and beeps 3 times
Here is a list of phone numbers if you still need them or would like them...
Apple Phone Numbers
btabz

TS1382 my kid's ipod has a blank white screen - how do I fix it?

my 7 year old put a passcode on his ipod and after entering the passcode wrong three times has been left with a blank white screen. How do I fi this?

Hello Tiger 42,
Thanks for using Apple Support Communities.
Please try to restart and reset your iPhone if it is unresponsive.
Turn your iOS device off and on (restart) and reset
http://support.apple.com/kb/HT1430
Take care,
Alex H.

My wifes Ipod Nano has blank white screen but still works

As the topic says, the nano has a blank white screen but still plays songs and works with iTunes. i have tried reseting it via holding menu and select for 10 seconds without success also i have tried holding select and play/pause after reseting (hard reset i guess) without any success.
I have tried restoring factory defaluts and loading different versions of iPod update without success.

You can check you service options here: Apple - Support - Service Answer Center

Ipod touch has blank white screen

My Ipod touch has a blank white screen. I have attempted to restore and restart. I have also reset. The touch is recognized on my itunes page. It will allow me to eject the ipod. I also put earphones on to determine whether I could hear anything (desperation). I can hear something through the speakers. Not music but kind of like dead air---a little hissing----so I know something is going on. I am confused about what to do or whether that little white screen is the beginning of the end. Any insight into my problem would be much appreciated

That symptom is covered here:
iPod touch: Hardware troubleshooting

My iPhone 6 keep showing the blank white screen

Today my phone is totally out of battery, when I charge it, it turns on like five mins later after I connect to the cable, and it shows the blank white board and at the bottom it says "slide to upgrage" then it seems upgrading but later it turns blank grey and keep grey in 5 mins later it start over again and shows slide to upgrade again, no many how many times I try it keeps showing the same steps like this, I cannot get into the homepage totally.
what can I do to solve it?

Take it in to the local Apple Store and get it serviced.

IPod 20GB Photo Blank/White Screen

Within the past half an hour I was listening to my iPod and I went to skip a song and my iPod's screen was blank. If i used the click wheel the back-light would come on but no image would display. I tried to reset my iPod and it still came up with a blank screen with no images or menu. It would still play the music, but the menus to choose what you are going to do are not showing up at all. basically my screen doesn't work at all except for the back-light. I tried restoring my iPod and that did nothing. Help please?

Any help here?
iPod 5th gen (with video) shows blank or white screen.

My Ipod has a blank white screen and my home button doesn't work

My Ipods screen just went totally blank white and my home button doesn't work anymore any #Advise ??
i've seen the other videos i can do it but my home button doesn't work ??

Try:
- iOS: Not responding or does not turn on
When it says place the iPod in recovery mode
Place the iPod in recovery mode using one of these programs:
For PC
RecBoot: Easy Way to Put iPhone into Recovery Mode
or
http://joshuabailey1997.wordpress.com/2010/09/02/recboot-v1-3/
If necessary:
Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
and
RecBoot tip
RecBoot may have problems on 64X windows, then try:
Tenorshare ReiBoot – Enter & Exit iPhone, iPad, iPod Recovery Mode with a Single Click
For MAC or PC
The Firmware Umbrella - TinyUmbrella
Installs blootware on PC too
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Ipod has a blank white screen or "THE WHITE SCREEN OF DEATH"

It's been like this for a while now and I don't know what to do besides to take it into the apple store since I think I have tried everything to help get it back to normal. Any suggestions?

I received a 4th Gen 20GB iPod (around 2 years old)from a friend and asked me whether I could fix it for him, which has been left untouched as a paper-weight for almost 2 months.
I tried to turn it on, and the screen was completed blank and the device looked dead. Before doing anything I prepared the following:-
1. A window based PC
2. A Mac computer
3. An USB iPod cable
4. A Firewire iPod cable
5. An iPod AC charger
As the iPod was previously formatted on a PC, therefore I tried to plug it with a PC via USB cable, it did not response and not able to get recognized by the PC. I ejected the iPod and connected with an AC charger, after a few minutes, I did a Reset for the iPod
How to reset iPod
http://docs.info.apple.com/article.html?artnum=61705
The iPod showed an Apple sign, it stuck there for almost a minute, the screen then showed a battery with an exclamation mark sign, and after a minute, the iPod turned off itself. I was sure that the iPod carried very low battery, and could not be charged by connecting it with any computer (both Mac and PC).
I decided to let it have a charge with an AC charger for a bit longer, after 10 minute I did the Reset again, this time a sign of folder with exclamation mark showed up after the Apple sign, and again could not get recognized by a computer.
I changed my mind, and put the iPod into disk mode
Putting iPod into disk mode
http://docs.info.apple.com/article.html?artnum=93651
Instead of connecting with a PC, I plug it with my Mac using a Firewire cable, it did not response, so I switched the cable to an USB, interestingly, the iPod got recognized and a window pop up indicating that the iPod needed to do a Restore. Therefore I clicked “Restore"

My ipod has a blank white screen???? WHAAATT???

My ipod got damp one day(but still worked for a week or two after that). the screen is white now when i turn it on. i know where the buttons are so i can still listen to music but cannot see anything. what do i do??

Did you already try this?
Display shows white screen
Turn iPod touch off and turn it on again.
If the iPod will not turn off, try to reset it. Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until either the Apple logo or battery symbol appears. If the battery symbol appears, continue to charge iPod touch until it is fully charged.
If that doesn't work, try restoring the iPod. See this article for assistance.
copied from iPod touch: Hardware troubleshooting

When I Preview or Publish my Project it shows a blank white screen

I created a projected, successfully published it as a SWF and everything worked fine. Now when I go back to edit and try to preview the project or individual slides it just shows me a blank white slide, even the captivate skin with toggles that I chose are missing. The toggles for the preview at the top left corner remain. When I preview as HTML5 in a web browser the project works fine. I tried copying the first slide to a new project and previewing to see if somehow another slide may be corrupting the project and that first slide still malfunctions on the new project. This is absolutely nervewracking, I really don't want to have to do all 23 slides all over again!

Hi,
Is it possible for you to share a sample project with us so that we can investigate the issue at our end. Please send it to [email protected]
Thanks,
Nimmy Sukumaran.

MY IPOD SHOWS A BLANK WHITE SCREEN

Similar Messages

Maybe you are looking for