My ipod shows a red battery, goes black and then sticks on to a white screen

My daughters ipod touch 4th generation shows a red battery when plugged in...then turns black for a couple seconds to then turn to a blank white screen.  what can I do to get this hook up to itunes so that I can fix it?

- See:
iPod touch: Hardware troubleshooting
- Try another cable
- Try another charging source
- Look at the dock connector on the iPod. Look for abnormalities like bent or corroded contacts, cracked or broken plastic.
- Make an appointment at the Genus Bar of an Apple store.
Apple Retail Store - Genius Bar
and/or
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar       

Similar Messages

  • HT201412 My iPhone 5 keeps going black and then pops up the power down screen.  What is wrong?

    My iPhone keeps going to a black screen while I'm using it and then the power down screen pops up.  I updated the phone last night, but still having the same issue.   What can be the problem and how do I fix it?

    Try doing a reset on your iPhone,
    Reset your iPhone by pressing the 'Sleep' and 'Home' button at the same time for about 15 seconds or so. Your iPhone will then go through a reset / reboot procedure and will be ready for use within about a minute.
    Don't worry about doing this as you will not lose data or settings.
    Good luck and do report back.

  • Just bought a new iphone4 and was loading os6 and now it won't turn on. the apple glows like it is starting up, then the screen goes black and then repeats the same process over and over. i have tried to reboot multiple times now

    just bought a new iphone4 and was loading os6 and now it won't turn on. the apple glows like it is starting up, then the screen goes black and then repeats the same process over and over. i have tried to reboot multiple times now

    I am assuming the phone was working prior to you installing IOS 6? Did you use itunes to install IOS 6 or just run from the phone?
    When I tried to do the Over The Air update to IOS6 on my iPhone 4, it errored out and I had to connect it to iTunes and select "Restore" from the summary screen after iTunes finds the phone is connected. If this works for you, it will go through a couple of reboots that take a few minutes to complete. It should then give you the option to start with a fresh new phone or to use one of your previous backups to load your contacts and other information, provided you have backed up the phone previously.
    I hope this helps you my friend!

  • HT3576 When I pull the notification screen down after about 5 seconds the screen goes black and then the apple appears for about 30 seconds and then returns to the home screen, this is an iPhone 4 running ios7 , any ideas??

    When I pull the notification screen down after about 5 seconds the screen goes black and then the apple appears for about 30 seconds and then returns to the home screen, this is an iPhone 4 running ios7 , any ideas??

    One problem though, the top button on my phone is jammed so i cant power off the phone, anyway of resetting the phone without using the top button ?

  • The screen goes black and then instantly comes back on

    While I am using this brand new computer, the screen flashes to black and then instantly comes back on.
    Any ideas?
    Mary C.

    Thanks for your help. I think the problem was that I was new to using a mac. I was accidently moving the mouse to the top left corner and that sent the screen to a screen saver, but then I would instantly move the mouse away and that would bring back my desktop.
    My mac also gets hot in the middle at the back and then a fan comes on to cool it down. It is a nice quiet fan so that is good. The heat feels good on my legs and actually keeps me warm. What a nice mac that keeps me warm! The other night the electricity went out in my hotel room during a big storm and the strobe light on the front of my mac served as a nice night light and flash light to get around the room. I love my mac!
    Mary C
    MacBook Pro   Mac OS X (10.4.8)   other uses for a mac

  • Ipod touch 2nd ge keeps going black and locking itself whats going on?

    Okay so I'm browsing my apps or listening to music and all of a sudden *click* nothing screens black...odd. So I press the power button and it lights up and says "slide to unlock." So I do it and *click* black. "sigh" Power screen lights up I slide to unlock and it says "slide to power down."     ???? Press cancel and I slide to unock. AGAIN and screen keeps flashing "slide to unlock and before I can even move my thumb it goes black again and then after a few times of that it stays on. So whats going on? It syncs up to iTunes and eveything just like confusing me and being a pain in the tucas?

    Try #2 and #3 in link below. If neither work, you most likely have a hardware issue.
    Basic troubleshooting steps  
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101

  • Macbook Pro starts, chimes, goes black and then restarts - continues like this and wont start

    I have been meaning to change my battery on my computer as it is completely dead and wont charge when plugged in. So this might be a problem but it is plugged into the adapter and it has been working fine the last few weeks, but all of a sudden this problem occured:
    I accidentally unplugged my computer before shutting it down and it switched off automatically. When I tried to turn it on it would start, the chime sound could be heard a grey screen with the apple would appear for a couple of seconds and then the screen would go black and the computer would try to reboot again and the chime would sound and then go black and restart again, chime would play etc. It continues like this and wont do anything else. I can open the computer in safemode without a problem. Is this just a battery problem (even though it is plugged into the charger)? or do I have a hardware problem.
    Also if I try to restart the SMC will this delete everything on my harddrive? I havent backed up everything and I dont have the means to back up (using safemode) at the moment. \Please help if you can. I am in a desperate situation at the moment.

    Given that it runs in Safe Mode, a reinstall may be overkill. But what the heck! A nuclear bomb CAN be successfully used to kill a mosquito...
    Recovery Mode == Command R
    Safe Mode == Shift

  • Why does my Ipad keep going black and then back to the apple logo.  It eventually goes to the start page but then blacks out again.  I have already rebooted several times with no luck!!

    Why does my Ipad 2 keep going black ahd back to the apple logo.  It eventually goes to the home screen and allows me to try something else but after about 30 seconds it happens again.  I have already rebooted several times? 

    Make Sure iOS is updated to the latest version
    Reboot the device by pressing and holding down the home and sleep/wake buttons (power) at the same time until the apple logo appears on the screen, then let go.
    If that doesn't work then reset the device by going to settings/general/reset/reset all settings

  • Why is my iPod going black and then going to back to the home screen

    Why does my iPod touch go blank in apps and go back to the home screen

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:       
    iOS: How to back up           
    - Restore to factory settings/new iOS device.
    -  Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • The screen of my iPhone 5 will come many colors, goes black and then the iphone turns off and turns back on, also the battery icon does not change, if you charge 100% the percentage does not drop but it remains well but when I turn off the iphone and I tu

    What can i do ??

    SharmFarm wrote:
    Good ev Ning Mario49    firstly I would like to say a great thank you for your attention to trying to help me,,,,,    i have looked at the links and will try everything stated first thing…
    Hi Mario,,,,
    I tried everything in your reply,,, thank you again,, I had done that once before and all was working great,,
    I have just now tried the Reinstall via iTunes, about 20 into the download, the iTunes logo on the phone disappeared, and the Apple Logo appeared again,,, I waited until the iTunes stated that the download had finished, and the install was in progress,,,
    Nothing happened, still the Apple Logo was visual on the screen, iTunes never recognised the phone which it was on my iTunes account previously,,,
    Still just a bunch of lines, maybe 5 or 6 so small writing,, I personally can not read what it is telling me, someone said it reads, incorrect shutdown,,,????????
    Please advise,???
    I am now at a loss,,, I really became excited when I saw the iTunes icon after putting the phone into restore,,,???
    Thank you again
    D

  • MBP Screen goes black and then restores.  NVIDIA graphics card issue?

    I've got a mid-2007 MBP, 2.4 GHz, 4 GB RAM, running 10.6.2.
    Over the past couple of days I am having random losses of video screen. I will be on a webpage, doing nothing with it, and the screen will go momentarily black. It normally lasts for a few seconds, then restores. Nothing I do seems to affect the blacking out or the restoration.
    I have the NVIDIA GeForce 8600M GT graphics card.
    Any suggestions / input on whether I am experiencing the failure? FWIW, computer is still under Applecare.
    Thanks

    See this KB article:
    http://support.apple.com/kb/TS2377
    I have similar issues with my MBP. However there is also a widespread issue on the forums in which the trackpad and keyboard stops responding, and it may be difficult to tell if the problem is loss of video or loss of input ability when the display goes to sleep automatically. I'm currently in this boat. I'm not quite sure if I have a video problem of if this is the issue with the trackpad/keyboard connection.
    The video card issue appears that apple will pay for out of warranty but they are not addressing the widespread problem with trackpad and keyboard loss of function and if you are out of warranty you are out of luck.
    Message was edited by: Bryan Brindeiro

  • IPhone 3GS screen goes black and then turns on and off

    Won't reset, just blinks back and forth from black screen to apple logo screen. What can I do?

    Try a reset or restore

  • Facetime randomly goes black and then exits.... hangs up on call backs

    try to call back and exits on "connecting". i have to restart the ipad in order to fix it only to have it do it again after awhile.
    using an iPad2 on iOS 5 (this is happening to my girlfriends ipad2 also)
    any help would be great

    Your describing what is likely a monitor issue, the GPU on the logic board usually wont manifest such symptoms.  However there still can be a power fault on the logic board to the monitor
    Contact Apple for appt. to drop your Air off for in shop diagnosis and possible repair.

  • My screen goes black and computer freezes.  I know this is a software based problem.  Any suggestions?

    About a month ago I installed an Intego software package on my computer.  After it was installed my computer began to randomly freeze.  The freezing would start with the screen going black and then fans spinning up.  Closing the screen didn't help.  Only rebooting did.  I took my Macbook to a repair service and they said that the hardware was perfectly fine.  They recommended a full wipe and reinstall.  I have since uninstalled Intego and for about a week my computer seemed fine.  Since then, however it has started acting up again.  I'm thinking about doing the wipe and reinstall of ML but am hesistant.  Any suggestions what I can do to avoid that?

    Hello nattygrimm,
    I was looking into the issue you are describing and found a great resource to try and fix the issue without having to re install the OS. It is an article called Mac OS X: How to troubleshoot a software issue found here: http://support.apple.com/kb/HT1199.
    I recommend starting here:
    The first and easiest test to try is to see if the issue affects a different user account on your Mac. Each user account has customized preferences and other items stored in its home directory. You'll first need to create an additional user if one does not already exist (follow steps a-h below). Then, log out of the current user and test the issue in the new user account.
    If this resolves the issue, there may be an issue with a file in the home directory of the original user account.
    From the Apple menu, choose System Preferences.
    From the View menu, choose Accounts (or choose Users if using Mac OS X v10.2 or earlier).
    Click "+" (or click New User if using Mac OS X v10.2 or earlier).
    Give the new user a name and short name.
    Mac OS X v10.3 or earlier only: Click the Password tab, and give the user a password.
    Mac OS X v10.3 or earlier only: Click Security.
    Select the checkbox for "Allow user to administer this computer". This makes the user account an administrator.
    Click OK, or quit System Preferences.
    Work your way down the article as needed.
    All the best,
    Sterling

  • My iPod show that my battery is receiving energy and that it is "charging," but it doesn't actually charge. The battery never increases; it only decreases. Even when I have it physically plugged in and charging, it loses battery whenever I am using an APp

    My iPod shows that my battery is receiving energy and that it is "charging," but it doesn't actually charge. The battery never increases; it only decreases. Even when I have it physically plugged in and charging, it loses battery whenever I am using an APP or anything. I'm thinking that the chip that receives the energy is damaged or worn out. Is there anyway to fix it without going to the store? My USB chords is fine. It charges other iPods fine. Including a second generation iPod which means my 4th generation iPod should not have an physical battery problem. Any suggestions? Thank you so much!

    - See:      
    iPod touch: Hardware troubleshooting
    - Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use.
    - Try another charging source
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar                          

Maybe you are looking for

  • Old Monitor as 2nd monitor

    I need dual monitors for editing in FCP and I got a low res, old HP monitor for free, but I just need it for one window of FCP. The plug it has on the back doesn't fit directly into the G5, but DOES fit on the converter that came with it. But the App

  • How to find connecting line

    Hi, I have a spatial table with geom type as 2002. I have a set of line (for example lets say it is 5 rows) attach image. I need to find line that is inner connecting to these 5 rows. What I mean is a boundary line has inner line. I am unable to get

  • Diagnosing a 3rd party servcie that hangs or stops on it's own

    Hi. I'm encountering some challenges with a 3rd party service that hangs or stops on it's own (and when self-stopping, hangs.) The challenge being that neither it's logs nor the Event Viewer contain any details. It stops logging itself when it hangs

  • Which type of users will be impacted

    Dears, which type of users will be impacted after increase new password parameters ? I tested that dialog users will need to reset the password and service users still could use old password to logon in front-end, but I don't konw how to confirm if s

  • Relinked picture files not updating

    Hi all, To begin with, I am using final cut pro 10.0.8 on mountain lion 10.8.4. The problem I'm having is that my media files are not updating in final cut pro x once they have been changed outside final cut pro. I'll explain what I'm doing: 1. I hav