My ipod shuffle 3rd generation is not showing in mac or itunes. It can play songs which were saved before. It can be charged also.
My ipod shuffle 3rd generation is not showing in mac or itunes. It can play songs which were saved earlier. It can be charged also with the USB cable.
I have updated my itunes. Reinstalled the same but still ipod is not showing in mac as well as in itunes.
I have tried to reset the ipod but still the results are same. Please help me..
I have exactly the same problem as vinitpanse - does anyone have an answer?
Similar Messages
-
I have recently updated my laptop from Windows Vista to Windows 7. I have just added three new playlists to my Ipod Shuffle, 3rd generation. On the panel in ITunes in view on the computer, all looks fine and music plays. However, after syncing a million times, when clicking to "hear" the playlists, the voice will call out all the old playlists just fine - except for the 3 new ones I've added; it calls them out as "playlist 3, playlist 8, or "purchased". All software for the ITunes has been updated as of the moment. Why would switching from Vista to Windows 7 cause this frustrating issue? All help appreciated.
From page 23 of your iPod's User Guide: http://manuals.info.apple.com/en_US/iPod_shuffle_3rdGen_UG.pdf
If VoiceOver is disabled in iTunes, you hear an abbreviated menu of playlists in numbered order, but not by name (for example, “Playlist 1, Playlist 2,” and so on).
So you'll want to make sure VoiceOver is enabled to correct this.
B-rock -
my ipod shuffle 3rd generation is no working correctly...i mean when i want to uo or down ipod's volume it can't work...and i can not change song...i mean i cant go next or previous song with my headphone....please help....what can i do!!!!!!!!!
Take it to your local Apple Store for service.
-
I have a ipod shuffle (2nd generation) that won't light up when plugged in to the power adapter. I have only used it a few times since I purchased it years ago. Also, when I plug it into my computer with itunes running, it isn't recognized at all, as in nothing happens when I plug the usb cable with ipod attached and on to it. Any help would be much appreciated.
but there is another unspecified error.
What is that error?
Are you sure she has a Shuffle? You mentioned a Sad Face.. that would indicate that the iPod has a display, which a Shuffle does not.
B-rock -
My Ipod nano 3rd generation will not sync with itunes or show up on windows, but other ipods do when I connect them using the same setup.
Hey Biglou1,
Thanks for the question, and welcome to Apple Support Communities.
I understand that your iPod nano(3rd generation) is not recognized in iTunes. The following troubleshooting assistant may provide a resolution:
Apple - Support - iPod - iPod nano (3rd generation) Troubleshooting
http://www.apple.com/support/ipod/five_rs/nano3gen/
If the above did not resolve your issue, choose an applicable article below that best describes your issue.
Windows
iPod appears in Windows but not in iTunes
iPod not recognized in 'My Computer' and in iTunes for Windows
iTunes reports that "iTunes cannot recognize this iPod at this time"
Thanks,
Matt M. -
I have an iPod Shuffle 3rd Generation (2G) and cannot adjust the volume up or down using the (+/-) selector on the headphones (original equipment). It has worked in the past, so not sure if the reason is because I changed a setting on my ITunes Library web-page?? Thanks
Just Google for: mic for ipod touch. You will find my hits.
http://touchmic.com/
http://www.cellphoneshop.net/microphone.html?CAWELAID=513810317&gclid=CIP-svXuy6 8CFUGo4AodXy-xaQ -
Hi my name is Vajra from INDIA, i am using ipod shuffle 3rd generation but it is not working properly due to battery problem, i need to change the battery please guide me how to change the battery or any chance to replace the ipod shuffle 3rd generation ?
Seems no one care about us .no one replied till no@!!!!@ strange
-
My Windows 8 PC does not recognise my Ipod Shuffle 3rd Generation - help please?
My Windows 8 PC does not recognise my Ipod Shuffle 3rd Generation - help please?
Hi Susan,
Welcome to Apple Support Communities!
Take a look at the article below, it has a lot of great tips that should be able to help you get that iPod rezignized by iTunes.
iPod not recognized in My Computer and in iTunes for Windows
http://support.apple.com/kb/ts1369
-Jason -
My ipod nano 3rd generation is not recognized by my Windows 7 laptop when I plug it in under itunes latest version
Hi Matt00,
thank you for your response. I followed the steps you suggested, but still no luck. Is a the fact that I am using a notebook a problem? I have been doing more searching and it seems my HP Pavilion Notebook does not have a firewire port?
Microsoft Windows 8 x64 Home Premium Edition (Build 9200)
Hewlett-Packard HP Pavilion 17 Notebook PC
iTunes 11.3.1.2
QuickTime 7.7.5
FairPlay 2.6.15
Apple Application Support 3.0.6
iPod Updater Library 11.1f5
CD Driver 2.2.3.0
CD Driver DLL 2.1.3.1
Apple Mobile Device 7.1.2.6
Apple Mobile Device Driver 1.64.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number xxxxxx
Current user is not an administrator.
The current local date and time is 2014-08-23 22:37:26.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
**** External Plug-ins Information ****
No external plug-ins installed.
**** Device Connectivity Tests ****
iPodService 11.3.1.2 (x64) is currently running.
iTunesHelper 11.3.1.2 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
No Universal Serial Bus Controller found.
No FireWire (IEEE 1394) Host Controller found.
Connected Device Information:
IPOD (G:\), iPod nano (3rd Generation) running firmware version 1.0.3
Serial Number: xxxxxx
Bus Speed: 61440
Most Recent Devices Not Currently Connected:
iPhone 4S running firmware version 7.1.1
Serial Number: xxxxx
**** Device Sync Tests ****
No iPod, iPhone, or iPad found. -
Apple iPod shuffle (3rd generation) on windows 7
How do i get my Ipod shuffle (3rd generation) to work on windows 7
According to the listing for the Apple EarPods at the online Apple Store, it is not compatible with the 3rd gen shuffle
http://store.apple.com/us/product/MD827LL/A/apple-earpods-with-remote-and-mic
The list for Compatibility shows the 4th gen shuffle, but not 3rd gen. -
Charging problem for Ipod Shuffle 3rd generation
Hi all,
What is the average hours to fully charge my Ipod shuffle 3rd generation using USB cable and connect to my computer?
I have using this method for charging 2 days each times more than 3 hours but still showing orange blinking light.
Could you tell me what is the resolution.
Thanks in advance.It's eject (not "reject"). It's the command for iTunes to unmount the iPod disk from the system, so that you can disconnect the iPod physically (without causing data errors). On an iPod with a screen, the iPod's screen says "Do not disconnect." On a shuffle, since it has no screen, the warning is the blinking amber light. When it's blinking, do not disconnect until it become solid.
In iTunes, the eject button looks like a triangle with a line below it. It is located next to the iPod's name, to the right. What happens to the iPod in iTunes, after you click the eject button? You say it "does not respond," but are you still able to access the iPod after clicking the eject button?
Another way to eject the iPod is using Windows Explorer or Finder on a Mac. Right-click on the iPod's disk icon, and select the command to "eject" it? On a Mac, it says "Eject [name of iPod's disk]." I'm not sure about the exact wording in Windows. -
IPod shuffle 4th generation will not connect to iTunes.
iPod shuffle 4th generation will not connect to iTunes. Windows Vista and iTunes, all updates current. Cables secure & connected. Device driver will not load. iPad will connect when tried with several other computers. When I try to connect it will hang iTunes until I re-boot. iPad does NOT appear in Windows Explorer either.
Oh, so the iPad DOES work fine connected to the same computer and the same port. I thought you said it did not in the first post, but maybe you got that working (or I misunderstood before).
NOTE: When things are working properly, the shuffle will not appear in Windows Explorer (except when actively syncing), unless you have Enable disk use turned on for the shuffle. So not seeing it in Windows Explorer may not be a problem.
Is this shuffle a new purchase... so it did not previously work for you on this computer? If so, make sure that the shuffle end of the USB cable is fully inserted into the headphones jack. The fit can be tighter than expected, and it may seem connected, but is not. For a surprising number of people, this was the problem.
In iTunes, is the sidebar (along left side of window) visible. If it is hidden, from the iTunes menu bar, under View, select Show Sidebar. When there are no devices connected, the heading DEVICES should not appear in the sidebar. When you connect your iPad, DEVICES should appear, with the iPad listed below. If you connect the shuffle, it is be added to the list under DEVICES. To confirm, you do not see the shuffle listed there under DEVICES, when it is connected?
When you connect the shuffle, does its light on the shuffle do anything? -
My friend gave me his iPod shuffle 3rd generation so that I could delete the music he has on it and sync it with my iTunes library instead. When I plug it into my computer's USB port, it charges but does not appear in my devices on iTunes. How do I get my computer to recognize it?
The 3G Shuffle is not listed as being compatible with the new EarPods from Apple on the product's page in Apple's online store.
However, it could be a typo, but time will tell. Somebody over in the Shuffle forum decided to purchase a pair for the 3G Shuffle anyways and give them a shot. Here is a link to that thread.
https://discussions.apple.com/thread/4303040?tstart=0
B-rock -
Can i operate ipod shuffle 3rd generation green without headphones
can i operate ipod shuffle 3rd generation green without headphones
You need headphones with compatible remote control buttons, which may be hard to find. Even the current Apple EarPod headphones do not have buttons that are compatible.
As an alternative, you can get an adapter with the buttons, and connect ANY standard headphones. Here's an example
http://www.amazon.com/iLuv-iEA15BLK-3rd-Party-Headphone-Compatible/dp/B002RL9WDQ -
I keep getting the message sync complete but my ipod nano 3rd generation is not syncing, any ideas. I have used 3 different cables, reinstalled itunes to the latest version. My nano shows in the side bar of i tunes
There are instructions for starting it on this page : http://support.apple.com/kb/TS1567
Maybe you are looking for
-
Problem installing Windows (7, 8.0, 8.1) on BOOTCAMP - Mavericks
Hallo guys, First I want to say thanks a lot to Christopher Murphy, because one and a half years ago I was having problems the same like the 1st post on that topic and with the instructions from Christopher I was able to get back my BOOTCAMP with Win
-
Settlement rules In Marketing PS
HI to All, I would like to know about settlement rules in CRM marekting , Whats the functionality of this rules while creationg of WBS element? Kindly provide some insight on it . Regards, Sanjana
-
hi all, I was trying to understand the sync-asynch bridge concept and from what all i have read i have come to know that there is a sync-asynch and also asynch-sync bridge.This is used in a scenario say file-rfc-file.But i have done the same
-
Hi all, I am after a little advice I will soon be implementing a QAS system for both our ERP and BI system landscapes, our current setup is that our system landscape has no virtualisation in place, I was wondering if anyone would recommend either hav
-
Making tab pages visible depending on user
i am having 4-5 tabs in my application. i want to appear them depending on the previlages of users . i mean if that user is eligle to see that dta then only that corrosponding tab shud be visible. how to do this? thanx in advance chaitali