My iPod shuffle keeps blinking and can't be recognized by my PC
When I connect my iPod Shuffle to my PC USB 2.0 socket, it starts blinking and can not be recognized by my system. It did work before. Can anybody tell me what's going on?
Hi Jill,
Since the iPod shuffle was working when connected to the same computer, I recommend connect the iPod shuffle to a different USB port in the computer or a different computer and check.
Update to the latest iPod updater and latest iTunes.
Also visit http://docs.info.apple.com/article.html?artnum=61711
Post back if the issue is not resolved.
Santo
Similar Messages
-
Hello!
I have a problem connecting my Ipod Shuffle 2nd generation to my Windows 8 based laptop. The computer doesn't recognize the Ipod and issues an error message saying 'USB device not recognized'. I tried uninstaling ITunes(latest version) and all other Apple software and reinstaling it back again, checked my USB hubs in the 'Device Manager' section of the Control Panel, you name it.
I could really use some help solving this.
I've turned to the troubleshooting section in Apple Support but it has nothing concerning situations in wich the device isn't even shown in the 'My Computer' folder.
Help a brother out, will you???Found a solution in another forum http://en.kioskea.net/forum/affich-63733-ipod-not-detected-on-computer (a few posts down).
It was for an IPOD so you can see those details in the link.
Found how to reset a shuffle and inserted it into these instructions - did not have to follow his last steps.
- Turn off computer.
- Plug Shuffle into usb.
- Then you must reset your shuffle
To reset iPod shuffle:
Disconnect iPod shuffle from the computer (if connected).
Move the switch on the iPod shuffle to the OFF position. Note that when iPod shuffle is off, the green stripe by the switch is not visible
Disconnect iPod shuffle from the computer (if connected).
Move the switch on the iPod shuffle to the OFF position. Note that when iPod shuffle is off, the green stripe by the switch is not visible.
- Start computer and it should install the usb driver for the ipod automatically.
- Your i pod will say do not unplug so don't. then open itunes and it will be there.
I did not have to do these thing below – did not get error message and shuffle was displayed in Itunes. / LMc
Just remember to not only eject ipod from itunes but stop usb.
Go to the program icons near the clock and right click the usb icon and "safely remove hardware" will appear and click it.
Stop it and select "apple ipod". -
EEEgads, I have used ITUNES for my Ipod Shuffle for years and now it is a nightmare with 11.0, I can't find my Ipod when I connect to Itunes, it is a new Win 7 PC. It used to show up on left side and I would slide podcasts right over to it for years, I have installed 3x with removing old install. I also can hear a constant throbbing sound in spkrs. when Itunes turned on, pls advise.
Hi Becki ..
You need to "authorize" the Mac.
Launch iTunes on the Mac then from the iTunes menu bar top of your screen click Store > Authorize This Computer.
Now, using the same Apple ID as you used to purchased iTunes media originally, you should be able to sync all your content.
More details here > iOS: Syncing with iTunes -
can i use The iPod shuffle cable (3rd and 4th generation) comes with a 45 mm USB cable for syncing and charging. with 2nd generation ipod?
thanks
-
I have an ipod nano 7th generation and can not get it recognised by my Windows 8.1 laptop (it appears briefly on My computer, then disappears). This happened after I updated iTunes to the latest version. Does that have something to do with it?
Hello there, kiwilucea.
The following Knowledge Base article offers up some in-depth steps for troubleshooting your issue:
iPod not recognized in My Computer and in iTunes for Windows
http://support.apple.com/kb/ts1369
Keep in mind if you get to Step 12 Reinstall iTunes, those steps need to be followed exactly as outlined for the reinstall to be effective.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
My ipad screens apple picture keeps blinking and will not open
my ipad screens apple picture keeps blinking and will not open. I have tried pressing both top and bottom button together, pressing just the top, etc. and nothing...it just keeps blinking the apple?
Hello llp03,
Thanks for the question, that definitely sounds frustrating. The following troubleshooting assistant provides steps that may lead to a resolution:
Apple - Support - iPad - iPad Troubleshooting Assistant
http://www.apple.com/support/ipad/assistant/ipad/
If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes
- Connect the device to your computer and open iTunes.
- If the device appears in iTunes, select and click Restore on the Summary pane. Learn more about restoring iOS software.
- If the device doesn't appear in iTunes, try to force the device into recovery mode.
iPhone, iPad or iPod touch: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Thanks,
Matt M. -
my daughter let a friend use her ipod shuffle. Now we can't find her so we can't get into her itunes. Restore still asks for her password. We just want a clean install. Is that possible?
Are you sure you have an iPod Shuffle and not an iPod Touch?
Identifying iPod Models
B-rock -
My Ipod Touch keeps saying it can't connect to my network?
My Ipod Touch keeps saying it can't connect to my network? Half the time it does after touching it over and over and hitting dismiss over and over. My server shows up though all the time its realy wierd. Then sometimes when I get it conected and go to open up Safari then it drops it all over agin can you help me solve this problem?
Hi pwrhuskers,
Try Resetting Network Settings on the iPhone, go to Settings> General> Reset> Reset Network Settings.
What type of wireless router are you using? What type of security is being used and how many characters are in the network key?
If you are using WEP, you'll want to use a 5 or 13 character key as described here: http://support.apple.com/kb/HT1344
This article: http://support.apple.com/kb/TS1398 provides other general Wi-Fi troubleshooting tips.
-Jason -
How can I get itunes to download on my PC. I just got an ipod classic for Christmas and can not get Itunes to download. Website goes to downloaded page but i never get a downloading popup. I even turned off my popup blocker.
Make an appointment at the genius bar.
If you went without an appointment, then it would make sense that you could be turned away. -
How do I change file format so I keep HD and can play on blu ray player?
how do I change file format so I keep HD and can play on blu ray player?
Hi
Part of it - in my way of doing is
Roxio Toast™ Pro incl BD-component.
• Burn short AVCHD - on standard DVDs (20-30 minutes at HD quality) - NEED Blu-Ray player to be viewed
or BD-burner and disks - for full Blu-Ray Disks (not got to this yet)
I think that saving as .mpeg4 H.264 and save on USB-memory to be put into PlayStation3 also keep high quality playback.
Yours Bengt W -
possible water damaged ipod shuffle, turns on and plays music, but have 3 seconds after turning it on to use buttons then they all lock up
I think that you need to get a new one. I got mine at http://www.prizerebel.com/index.php?r=1552886
-
Try to export renederd short clip in FCP 7 via Share, but export knob keeps blinking and does not react. Please help,
thank you very much!I did notice the "sequence" indicated 32 bit and all the clips, wav music, etc. are 16 bit. Is that normal?
May be but I would.
• Convert all material to formats that FinalCut has easy to use and that match the Final product (Movie)
• especially the Audio file .wma, wav etc and 32-bit - is no good start
- convert them to .aiff 16-bit 44.1kHz or 48kHz
• Set up a NEW Project - BUT FIRST select - right kind of project depending on material - AND FINAL MOVIE PROPERTIES.
THEN FIRST - Start a NEW PROJECT - Else it will not work.
Yours Bengt W -
I downloaded music to my ipod shuffle from itunes and it still saying saying download music from itunes. But there is music on it when I hook it to the computer but it want play on the shuffle. Someone please help me.
Hello Rod2174,
I'm sorry to hear you are having issues with your iPod shuffle. I also apologize, I'm a bit unclear on the exact nature of the issue you are describing. If you are having issues transferring music to your iPod or playing music that is on your iPod, you may find the information and articles linked from the following page helpful:
iPod shuffle - Apple Support
Sincerely,
- Brenden -
after finish installing an update, the the status light keeps blinking and a picture of the connection between the micro USB and iTunes shows up - what is this about?
The update failed - using a USB to microUSB lead (that Apple annoyingly don't include!), try to restore the AppleTV software to current version software using instructions here:
http://support.apple.com/kb/HT4367
Pay attention to differences in power connection depending on whether or not you have AppleTV2 or AppleTV 3. -
My keyboard light keeps blinking and a message on computer says connect keyboard with bluetooth
My keyboard light keeps blinking and the computer has a grey screen with picture of the keyboard with message saying connect your keyboards bluetooth to computer...but it doesnt do anything even when i shut computer off then turn it back on.
Sounds like a pairing issue. See if this article helps http://support.apple.com/kb/HT1809
Maybe you are looking for
-
See subject
-
Slideshow with scrabbook (or any other themes)
The option to give each slide its own duration does not work!!! Even if we think of a slide as a group of slides - due to the template with i.e 3 photos - it will not adjust correctly... This also means, that its not possible to work with videoclips
-
Sharing persistent package variables across multiple sessions
I don't think this is possible, but I'd love to be proven that it can be done. Basically I'm looking for something similar to the static classmembers concept in various OO languages.
-
When reinstalling itunes it stops on "Status : Starting services "
The error mesg. reads Service "ipod service' (ipod service) failedto start. Verify that you have sufficient privilges to start system services. I have the option to either retry or cancel. Retry does not work and cancel just removes itunes icon. Did
-
Tengo licencia ACC y no puedo descargar versiones completas, solo las de prueba
Hola, buenas tardes. Necesito trabajar y no encuentro las opciones de descargar los programas, solo me da opciones de prueba. Urgente necesito trabajar en Lightroom. Agradesco su ayuda.