My Ipod stays Fully Charged So it will not Connect to Computer...

You would think an Ipod that is always fully charged is good! but it is not, it wont connect to the computer because it is "Fully Charged" and will never fully turn off because it is "Fully Charged". So it just sits there and goes "I am Fully Charged". I made it play videos for about 2 to 3 hours but it claimed it was still "Fully Charged". How can i get it to connect to my computer? How can i fix it so it shows me my actual battery life!

Welcome to Apple Discussions!
It shows this when you connect it to your computer?
Have you tried resetting the iPod while it is attached to the computer?
Resetting iPod
Also, have you tried a different USB port?
Finally, try this...
iPod missing in "My Computer" or in iTunes for Windows
btabz

Similar Messages

My iphone is fully charged but it will not turn on unless plugged into a charger

my iphone is fully charged but it will not turn on unless plugged into the charger in the wall, it wont even turn on when connected to the computer!!!!!!!

Hi there. Any luck with your phone? I'm having the same problem

IPod Touch stuck in DFU mode, broken lock button, will not connect to computer.

I have an iPod 4g running on iOS 6.1.6. The lock button has been broken for little over a year now. But yesterday, my iPod went into DFU mode and will not connect to my computer whatsoever. I have tried everything that Apple tells you to do to try and fix this issue like restarting AMDS, reinstalling iTunes, and even the USB Driver. Nothing has worked, and I would really like some help with this. Thank you very much!

Try:
- iOS: Not responding or does not turn on
Ignore the reset and when it says place the iPod in recovery mode
Place the iPod in recovery mode using one of these programs:
For PC
RecBoot: Easy Way to Put iPhone into Recovery Mode
or
http://joshuabailey1997.wordpress.com/2010/09/02/recboot-v1-3/
If necessary:
Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
and
RecBoot tip
RecBoot may have problems on 64X windows, then try:
Tenorshare ReiBoot – Enter & Exit iPhone, iPad, iPod Recovery Mode with a Single Click
For MAC or PC
The Firmware Umbrella - TinyUmbrella
Installs blootware on PC too
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

HT2292 I recently got a new ipod touch and the new one will not connect to itunes. I've done all the troubleshooting and now I'm just plain frustrated. With the new update my old ipod froze and best buy gave me a new one. What to do?

My ipod recenly froze with the last update. bestbuy gave me a replacement. the new one will not connect to the computer or itunes. i followed all the instructions and - nothing. It's frustrating enough as i lost all my notes and work, but now I can't connect to sync with itunes. i don't get it. i'm not a supertech so i don't know what to do. help!!!!!!

Thanks, Bob! You are correct. And, we learned this as we spoke with APPLE TECH SUPPORT by phone on Christmas day (800-APL-CARE). One of their reps spent the time to help us troubleshoot this, but the boiled down conclusion is your answer, and to repeat for the benefit of others, here is what worked:
1. With our Belkin router set to "out-of-the-box" WEP 64 bit security, we could not get wireless access of any kind. Only with the Security Mode set to DISABLED, could we gain access.
2. Changing the router's security mode setting to "WPA/WPA-2...." and entering a new min. 8 char passphrase, and then entering that same passphrase into the IPOD Touch, and restarting the router, did the trick!
Based on this, and some info found in another posting, I can only conclude that the IPODs and IPHONES do not support WEP security mode in many generic routers used by thousands of consumers. Hopefully, those same consumers can figure out how to change their wireless router setttings to WPA/WPA-2 security mode and ALSO get all their other wireless devices (PCs, laptops, WII boxes, ROKU boxes) all reconfigured to WPA mode, too.
I THINK THE BOTTOM LINE HERE IS THAT THERE IS AN ISSUE THAT APPLE NEEDS TO ADDRESS WITH WEP COMPATIBILITY and it may also be the case that MOST CONSUMERS ARE USING WEP 64 BIT security on their home wireless routers?
In any case, it's working now, so anyone who is having problems should try changing to WPA mode and post back here if it worked for them!

My ipod shuffle is brand new and will not connect to itunes

my ipod shuffle will not connect to itunes and it is brand new and i have used other ipods on this computer.

When you take this one back, be sure to have your USB docking cable checked, to make sure it is not the thing that is defective.
Also, make sure you have USB cable plug completely inserted into the headphones jack. The fit is sometimes tighter than expected, especially when the shuffle is new. This is apparently enough of an" issue" that Apple has a tech support doc about it
http://support.apple.com/kb/ts3572

Officejet 4630 will not connect to computer to scan.

When I first got the product it scanned a few times but now will not connect to my computer to scan even after re-downloading drivers and entering a printer claim code.

I would recommend using the HP Print and Scan Doctor to help diagnose and resolve your connection issue.
Say Thanks by clicking the Kudos Star. Please mark the post that solves your problem as an Accepted Solution so other forum users can utilize the solution.
I am an HP employee.

Nokia 2600 classic will not connect to computer

hi i have installed and uninstalled Nokia pc suite several times , tried on both windows 7 and xp pro, and tried the registry cleaner for clearing nokia files and i cannot get this phone to connect to my computer. It will not connect when asked to at start up screen for nokia pc suite. Can anyone help?

could you try like this?
1. open PC suite, select "setting"
2. then select "manage connection"
3. select bluetooth ( others should not be used for 2600c)
4. then doule click the "bluetooth" icon and start to search your 2600c (ensure your 2600c' bluetooth is active)
good luck!
if this answer is helpful for solving your issue, pls press the white star, thanks!

Iphone 4S stopped working when fully charged and it will not turn on. what should i try?

My brand new, fully charged, working for nearly 2 days iPhone 4S suddenly stopped working and will not turn on. I've tried recharging and it's unresponsive. What should I try to do?

I've had a similar thing happen to my new iPhone 4S three times. It gets hot and doesn't respond to either button -- the screen remains completely off. I have to hold down both buttons for awhile until the Apple appears and then everything seems fine... until it happens again. Once it happened overnight, so I missed my alarms. Another time, it was while I was at dinner.
Always it happens when the iPhone is on standby with the screen off and nothing particular happening with it. The iPhone 4S is brand new, hasn't been dropped, hasn't been messed with in any way.
Is there a way I can get a trace of what happened before I reset it? The system log (visible in "System Status" and other apps) starts with the reset, so it doesn't help here.

I'm not sure how to use this site....but here goes, I have a samsung galaxy and it's fully charged but it will not turn on, can someone give me some solutions as to how I can get it to work?

I'm not sure how to use this site....but here goes, I have a samsung galaxy and it's fully charged but it won't turn on, can someone give me some solutions I can use to fix this problem???

Try this website. Yes its sprint but it might help you. http://support.sprint.com/support/article/Troubleshoot_issues_related_to_your_Sa msung_Galaxy_S_II_not_turning_on_completely/WTroubleshootingGuide_542_GKB51165-T rend?INTNAV=SU:DP:OV:TSIS:SamsungGalaxySIi-AsYouGo:TroubleshootIssuesRelatedToYo urSamsungG

Updated my iPhone 4, fully charged and it will not turn on or do anything. HELP!

It was fully charged, update took less than 5 minutes- it rebooted and then nothing. DEAD! Nothing!
I have tried to reset it with holding down the home button and power keys....again nothing.
PLEASE HELP!

Try to hold the Home & Wake/Sleep button simultaneous until the device restarts itself.

HT4528 fully charged iphone 4 will not start

iPhone 4 working, fully charged, screen times out and now NOTHING. Hooked back up to charger. NOTHING

Hold down the Power Button and the Home Button at the same time for 10 seconds
Then hold down the Home Button for 5 seconds or until the Apple Logo appears
If that does not power on your iPhone, then try connecting the phone to your personal computer with iTunes installed.

My battery is fully charged but mac will not start

The battery is charged but when i unplug the charger the computer turns off.

Hello Monaco,
you can check the performance of your battery in system report under power
apple icon>about this mac>more info>system report>hardware>power
you wil find info like:
Battery Information:
Model Information:
Manufacturer:    SMP
Device Name:    ASMB011
Pack Lot Code:    1
PCB Lot Code:    0
Firmware Version:    a41b
Hardware Revision:    0
Cell Revision:    0
Charge Information:
Charge Remaining (mAh):    6781
Fully Charged:    Yes
Charging:    No
Full Charge Capacity (mAh):    6784
Health Information:
Cycle Count:    1
Condition:    Replace Now
Battery Installed:    Yes
Amperage (mA):    -23
Voltage (mV):    12535
if your full carge capacity is zero, and the voltage is around 9.7, as shown below,
your battery wont charge nor feed your Mac.
it needs to be replaced.
Full Charge Capacity (mAh):
0
Health Information:
Cycle Count:
1
Condition:
Replace Now
Battery Installed:
Yes
Amperage (mA):
0
Voltage (mV):
9785
wilfrido

IPod touch (4g) will not connect to computer

When I connect my iPod touch to any computer I get a pop up bubble saying USB device not recognized. I have uninstalled my drivers and re-installed them. I have reset my iPod at least 7 times and I have also erased everything and reset it to factory settings. I have uninstalled the apple software from my windows computer and reinstalled it so now I have the latest version of the software downloaded. The iPod is running iOS version 6.1.3. When I try to charge it does not say that it is connected and charging. It is supposed to make a connected sound and show a lightning bolt letting me know it's charging but it doesn't. Ive had to make sure that the battery is completely dead before the ipod will start to charge (still not notifying me I just leave it there and come back about 4 hours later and see it's fully charged). I have done everything I can think of and what people have suggested on other threads and nothing is working. My warranty is expired and I do not want to take it to Apple and pay $99 to get it fixed. Can anyone please help me?!

Not Charge
- See:
iPod touch: Hardware troubleshooting
- Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use.
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store. The appointment is free.
Apple Retail Store - Genius Bar

I have a brand new ipod touch and when setting it will not connect to my home wifi, even though it is working with all other devices

I have a brand new, just out of the box, ipod touch that will not connec to my home wifi. The connection works with all other devices.

What happens when you try to connect?
Error messages?
Does the iPod see the network?
Have you tried other networks?
See:
iOS: Troubleshooting Wi-Fi networks and connections

My iPod won't turn on and will not connect to my iTunes

I used my iPod Mini on Sunday, December 4, 2005 without a problem. When I attempted to use it the next day, it would not turn on. The screen won't even come up to try and unfreeze it. I tried to connect it to my iTunes by plugging it into my USB port (which is fully functional) and it would not recognize that I had an iPod connected to my computer. I have called your support services, but the assistant was unable to find what was wrong with my iPod. I received this iPod Mini in April of 2005 and have only had it frozen once (which was fixed easily). I was wondering if someone could please help me?
Dell Inspiron 700m Windows XP

I'm having the same problem. Mines froze and isn't working now either but won't update or restore either. You think you could tell me the service number.

My Ipod stays Fully Charged So it will not Connect to Computer...

Similar Messages

Maybe you are looking for