My ipod stopped showing up in itunes after software update

i have an ipod nano and an ipod classic and they both stopped showing up in itunes after i updated the software. please help

Have you tried here:
iOS: Device not recognized in iTunes for Windows

Similar Messages

  • Ipod wont show up in itunes after installing update

    okay so i hadn't updated my ipod in a couple of months (bad i know but we have really slow internet here and it takes forever to download things) then i downloaded the update a couple of days ago and it started installing then came up with an error saying it failed.
    It was late at night so i just switched off my laptop and went to bed, and the next morning i tried to turn on my ipod and it was stuck on the connect to itunes screen. When I plug it in it comes up with a box saying "Windows needs to install device driver software for your Apple Mobile Device (Recovery Mode)" I clicked the locate and install device driver software, but it can't find anything.
    It wont come up in itunes and i've tried the restoring thing, but it's not working...maybe i'm doing it wrong? idk help anyone?

    I HAVE THE SAME PROBLEM! Downloaded 9 point whatever it was, and then it said i needed to update my iPod, so i lugged it in, all was hunky dory and then it said i had to restore my iPod and so i tried that and now it wont restore it, keeps coming up wit some whacky error and the iPod is stuck on the connect to iTunes screen and its driving me insaaaaaaane!!!!
    HELP!!!
    it very rarely even comes up on my iTunes page anymore - argh! x

  • Ipod touch4g  is not detected in pc and itunes after software update

    after software update is done. when i connect my ipod touch it is not detected in pc (windows 7) and in itunes please help me anyone.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • USB Audio stopped working on 27" ACD after software update 1.0

    Hi all,
    My 27" ACD worked flawlessly until I installed 27-inch LED Cinema Display Software Update 1.0 earlier tonight. I have a unibody MacBook Pro that doesn't output audio from the mini displayport, when I got the ACD Friday, USB audio output worked fine. I also have a 24" ACD and audio worked fine on that as well. But after software update 1.0, I can no longer get audio output of the 27" ACD to work via USB, I even rebooted my Mac and it still doesn't work. After trying it a few times in Sound.prefPane, I now can't even select the "Display Audio - USB" option (when I click on it it reverts to the other option right away).
    From /var/log/system.log, I believe this is the error related error message:
    System Preferences[332]: Error ^P trying to set sOut device to 264
    Message was edited by: ayn

    I have this problem too. I have the 27-inch LED cinema display connected to my Mac Pro 1,1 via the Radeon 5770. I also suspected it had something to do with the machine going to sleep, but the audio doesn't disappear every time it goes to sleep. Unplugging the monitor fixes the problem.
    I also noticed that when the sound has went away, if I try to change the volume there will be a long delay before seeing the volume-change graphic. Also, toggling the sound device in System Preferences while the problem is in effect is unresponsive, sometimes giving the beach ball. Finally, this message is seen in console logs when the sound has went away:
    10/19/10 6:01:22 PM kernel USBF: 75053.200 AppleUSBEHCI[0xf3d0800]::Found a transaction which hasn't moved in 5 seconds on bus 0xfd, timing out! (Addr: 5, EP: 0)
    I can make this message appear on demand by attempting to change the volume.
    If (when) this happens again, I'm calling support.

  • My iPod don't appear in iTunes after I update it to 11.1.4?

    After I update my iTunes into 11.1.4, my iPod cannot be recognised. Furthermore, I've tried to connet other iDevice, such as iPhone, but it still not working. Only "syncing over Wifi" is working. Please help me to fix this problem. 

    Hi Daniel!
    Try the steps in the following article to help you troubleshoot this issue with your iPod being recognized in iTunes:
    iPod not recognized in My Computer and in iTunes for Windows
    http://support.apple.com/kb/ts1369
    Thanks for being a part of the Apple Support Communities!
    Regards,
    Braden

  • My iPhone 3GS is neither charging or showing up in itunes after i updated it to ios 5.1.1 Any Help Please!!

    My iPhone is Not Charging From the mains or even not showin up in itunes after as soon as i have updated it to ios 5.1.1
    Please Help me to Fix this issue!!
    My iPhone model is 3GS and was on ios 5.1 before it was updated to 5.1.1
    Help Me out please!!!

    http://support.apple.com/kb/TS1538

  • "podcasts" is not visible in iTunes after software update

    iTunes no longer shows "podcasts" as a category.  I have several active subscriptions--they seem to have disappeared.  All of the other usual categories (e.g., music, TV shows) are still there.  This occurred immediately after I downloaded today's iTunes upgrade.  I have tried downloading more podcasts.  That happens fine--but they are not visible from iTunes after the download.

    I can re-check the "podcasts" box in the Windows version.  It's not grayed out.  But there doesn't seem to be any way to save my changes.  Didn't the "preferences" dialog box used to have a "save changes" button at the bottom? 

  • AT2 Showing Only 2 Icons After Software Update

    So I updated the software of my AT2 and it showed only two icons (settings & computer) & yes it was connected to the internet.
    So I restored to factory settings and problem persists. Please help.
    FYI, image:

    Thanks mate. I set the country in settings and logged in to my iTunes account which I assumed it would have done automatically after the update and all the icons have arrived.

  • Ipod wont show up in itunes after i restore to factory settings

    My ipod does not show up in my itunes list but it shows up in my computer as a drive
    it all started when i got my ipod back after getting it fixed ( it was a problem with the battery) well it said that i needed to restore the factory settings so i did then a message came up and said your ipod is now restarting it will come back to your iptunes list after it has restarted.... but it didnt
    and now when i plug my ipod in i get a bubble come up that says:
    "windows was unable to save all the data for the file F:\iPod_control the data has been lost the error may be caused by a failure of your computer hardware or netowrk connection please try and save this file elsewhere"
    i have done everything i can to try and fix this (5 R's and such) but i have gotten no results
    please help quickly as i use my ipod all the time and cant function without it =]

    I have a similar issue.
    Mine shows in iTunes and in PC. It will also allow me to sync.
    But when I do sync, it runs fine for about 10 minutes, then I get an error similar to yours with a directory location. It keeps syncing and will periodically show the errors. Then it will lock up.
    I have run chkdsk, awindows utility (chkdsk [driver letter]: /R /F) over the iPod when it has been restored and it found nearly 400mb of bad sectors.
    I though this would fix the problem but is has not. When I run chkdsk over it again, it does not find anymore bad sectors (it does however tell me that it has 400mb of bad sectors logged.)
    I am banging my head against a wall trying to fix this, or even find out what the issue really is. I assume it is a dodgey hard drive, but I do not want to replace it and still have the problem.

  • IPod not showing up in itunes after password forgotten

    Device - iPod Touch 2g 16gb (MB) Running 4.2.1
    So i was browsing through the settings on my iPod the other day while i was on holiday in egypt and it said my password was turned off so i checked it out and re-enabled it with the same password as before, this kept happening so i re-booted my iPod, i typed in the password i set and it said password incorrect, so i tried all the other passwords it could be and nothing worked, so now i'm back home at my PC i put my iPod into iTunes and i got this (and i included the top quater of my itunes to show my iPod hasn't showed up)
    i tried putting it into DFU mode and nothing happened

    Your link does not work.

  • Connect to iTunes after software update

    After doing an update to 7.03, it keeps saying "Connect to iTunes", i then restore it and it then fails. Any ideas? Thanks

    ReBoot your phone & computer..
    Check your internet connection..Logout then Reloggin to iTunes...

  • Keyboard stops working for the finder after software update 10.5.7

    It is working for any other application, but in the finder I cant use any shortcut, quick view, rename files etc...
    I have tried rebooting and for a couple of minutes it was working fine, but then it stop working again.
    I have also try repairing permissions with DiskUtility ands running scripts with Cocktail, but the problem remains the same.
    Any ideas?

    Hi Carlos,
    It's a bit of a longshot, but have you tried trashing ~/Library/Preferences/com.apple.Finder.plist?
    Yang

  • TS2771 itouch stopped working with Bose sounddock after software update 5.1.1

    Have an iTouch that used to work well with Bose SoundDock.  Then updated iTouch software to version 5.1.1  and as usual apple ITouchOS now does not recognize the Bose SoundDock at all now.  Error message iTouch does not support this accessory.  What the heck?  How to fix?  Buying new dock is not solution. iTouch is gen 4.

    You can try the standard fixes:
    Reset. Nothing is lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup
    - Restore to factory settings/new iPod
    - If still the problem then it appears that the iOS update broke the compatibility. That happens sometimes. In that case you have to wait for an update from either Apple or Bose.
    - Also, use the communities search box in the upper right and search for. bose. I think other users had same problem. It is hard to remember the dock manufacturer.

  • HT5642 ipod won't connect to internet after software update

    Help. I can't get my ipod to connect to my wifi since I downloaded the new update.

    Does the iPod connect to other networks?
    Does the iPod see the network?
    Any error messages?
    Do other devices now connect?
    Did the iPod connect before?
    Try the following to rule out a software problem:                 
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • Camera Raw stops functioning in Bridge CS6 after software update.

    I'm running Mac OS X 10.9.2 and just installed Adobe's Camera Raw 8 update.  Immediately afterwards, Camera Raw was disabled/greyed-out in Bridge CS6.  Even the Camera Raw Preferences dialog was disabled/unresponsive.  What went wrong?

    Same here,
    I'm using CS6 Master Collection with Mac OS X 10.9.2 and installed update to ACR 8.4.0.199.
    Since then I
    - don't see the ACR adjusted icon in Bridge
    - don't see changes made to pics in ACR in Bridge preview
    - don't have right-click option to open in ACR from bridge
    - cannot rotate RAW files in bridge (all commands grey'd out)
    - cannot apply last ACR settings (no such command on right-click)
    I can however open RAW files from Bridge via double click.
    I have a different hard drive with OS 10.6.8 and same installation of CS6 Master Collection, but NO upgrade on ACR. That one works as expected without any problems.
    I'm in urgent need of a solution, since always switching the OS is in no way a workflow on a professional workstation.
    Yours,
    Ray

Maybe you are looking for

  • TS3899 I still can not send email from my ipad but iPhone works on those accounts

    I still can not send email from my .mac account or a .comcast.net from my ipad. I how 2 people so far that has brought to my attention. We have exchange accounts setup on the ipads for work. I compare the settings from iPad to iPhone from my view it

  • Closing the browser - new problem

    Hi Experts,                   I had this issue of closing the browser in web Dynpro Java. i did it with the help of the experts views posted in SDN(passing the URL of the java file containing the javascript to close the browser to the exit plug). Whe

  • What is the deal with data charges?

    I'm hoping someone can help me out. I have been a Verizon Wireless customer for many years, and have never had a problem with the services - until today. This morning, when I turned on my phone, I was informed that a software update was available and

  • Asset Explorer -- Acquisition Value Year-End

    Dear all, I'm looking on how to fetch a certain value... If you access transaction AS03 You'll see th master data for a certain asset. Now... if you click on the "Asset value"-button, you'll be redirected to transaction AW01N, "Asset Explorer". In th

  • Create /deploy mysql db on tomcat

    Hi Sorry if my question seems silly..it should be very basic to experts like you :) I want to create a mysql database that I will later connect to from a servlet under apache tomcat server. my question : where should i put the mysql database ? should