My ipod touch 2g doesnt work anymore so what should i do

hi

Without more information such a the current status of the iPod all I can suggest is:
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Similar Messages

  • My ipods touch screen doesnt work anymore i cant unlock my ipod

    my ipod was working fine for a while and then now all of a sudden the touch screen doesnt work at all. Ive restored it twice now and i cant unlock my ipod because the screen doesnt work..anything i can do to fix it or do i have to buy a new one?

    If you restored to factory defaults/new iPod and still have the problem you very likely have a hardwre problem and an appointment at the Genius Bar of an Apple store is in order.

  • TS2771 HELP! My ipods touch screen doesnt work anymore!

    My ipod screen is not working! I updated to latest version. This started last few years (2011) and I thought it would stop, but it dosent work! Q.Q Help me pls

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup. See:                                 
    iOS: How to back up           
    - Restore to factory settings/new iOS device.
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar          

  • My ipod touch in not working anymore how could I save it before doing a resature

    my ipod touch in not working anymore how could I save it before doing a restaure

    Restart, reset, restore are the basics from the manual.  Try each of them.

  • After upgrading to 10.7.5 some of my AU plugins can not be validated in Logic pro. (I got error message "Remove property listener". I can not work anymore. What should I do?

    After upgrading to 10.7.5 some of my AU plugins can not be validated in Logic pro. (I got error message "Remove property listener". I can not work anymore. What should I do?
    VIBAC

    I downloaded and installed
    OS X Lion 10.7.5 Supplemental Update
    and that solved my problem completely. (368 AU plugins now works!)

  • The top power button on my iPod touch doesnt work anymore. What do I need to do to fix it or figure out why it all of a sudden stopped working??

    The power button on the top of my iPod touch no longer works. I cannot turn my iPod on or off. How do I fix this problem or figure out what caused this to happen?

    - When you depress the button does it feel like it is working?  Could something gotten in the space and jammed the button?
    - Can you reset the iPod:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Have you tried restoring the iPod from backup via iTunes on your computer.
    - Next would be to restore the iPod to factory defaults/new iPod
    - Last, make an appointment at the Genius Bar of an Apple store.

  • I own an iPod touch which stopped working...what can I do?

    I own an iPod touch which stopped working and this being a quality team and prestige is that I have to be considered as disposable as so far I have not been able to repair and I am sorry I took some effort for me it . If your business is equally as good customer service and say I can do to solve the problem and my equipment is still functional. Thank you for your attention to this.

    Oredinarily, I would ask if it's still in warranty and, if so, recommend that you contact Apple.  However, you indicated that you attempted to repair the Touch yourself so I suspect that you have voided the warranty.  You might want to try Apple anyway and see what happens.

  • Forgot password on 5th generation iPod touch and I'm locked out. what should i do now

    I am locked out of my ipod touch. I forgot my password and everytime I try a new one it locks me out for longer. I tried to reset it through itunes, but it said it cant because I need to enter the password. What should I do next?

    Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
    A
    1. iOS- Forgotten passcode or device disabled after entering wrong passcode
    2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
    3. Restoring iPod touch after forgotten passcode
    4. What to Do If You've Forgotten Your iPhone's Passcode
    5. iOS- Understanding passcodes
    6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
    7. iOS - Unable to update or restore
    Forgotten Restrictions Passcode Help
                iPad,iPod,iPod Touch Recovery Mode
    You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
    You can restore from a backup if you have one from BEFORE you set the restrictions passcode.
    Also, see iTunes- Restoring iOS software.

  • My Ipod Touch isnt loading my apps. What should I do?

    My Ipos Touch isnt loading my apps. What should I do?

    Hello all,
    I have had the same problem,
    It seems to be after charging/synching the ipod with my computer (connected via usb).
    Any apps which were fully closed, (not in the 'task manager' like feature where you double tap the home button) are unable to be opened. When you try the screen 'zooms in' as if to go into and app, then flashes and sends you back to the home screen. The app is then in the 'task manager' but it is unreachable and the same thing happens when you try to open some apps.
    The temporary fix I have found is to download and install any app on the ipod (i use small free ones). This seems to 'ulnock' the bug and the ipod is usable as normal.
    This is a bug which really annoys me as I often charge mine using my pc, then leave home. I go to play a game or use some app which does not require wifi and I am unable to open almost anything.
    I have not had any previuos versions of iOS but I am under the impression that this error only occurs in iOS5 on some ipod touches...
    I have yet to figure out if using the wall charger has the same effect on the ipod. Will update this post when I do.
    Any suggestions on a  permanent solutino would be much appreciated.
    Cheers

  • My ipod 2g screen doesnt work anymore after replacing it with a new one. Please help

    My ipod touch 2g display wasnt working anymore. The brightness wouldnt work anymore and i did everything, restore, on and off recovery mode everything. So i decided to buy a new screen. When i got it i got straight to it and replaced it. When i turned it on to test out the new screen nothing showed up, i plug it in and everthing. Then i changed it back to the old one and nothing showed up as well. Please help

    If you restored to factory defaults/new iPod and still have the problem you very likely have a hardwre problem and an appointment at the Genius Bar of an Apple store is in order.

  • After replacing my ipods screen it doesnt work anymore

    My iPod broke when i droped it from a 2nd floor but it still turned on I replaced the screen lcd turnd on fine but the touch doesnt work i rechecked all made sure the digitizer was conected but it still didn't work please help?

    If you verified that all connections are OK and you did not damage any cable then take the iPod to someone with more experience fixing iPods

  • The microphone on my iPod Touch does not work anymore :( what should I do ?????

    Hi , my iPod is awsome,but the microphone doesnt work and i dont know what to do also before i did have probleme with my iPod but ive find a way on itunes to fix it !!! And when i talk on memo we can see that it wont get up more then 20 level !!!!

    - Make sure the mic hole is unobstructed. It is the little hole on the back side of the iPod by the camera lens.
    Try:
    - Reset the iPod. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup
    - Restore to factory settings/new iPod.
    - Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • Volume and hold button of my ipod touch 4g doesnt work what can i do?

    a few days ago the volume and hold buttons doesnt work, some times it get fixed for a while, but few minutes later it get the same way before
    please help
    =)

    Try "restoring" your Touch.
    Restoring iPod touch
    Make sure you have an Internet connection and have installed the latest version of iTunes from www.apple.com/itunes.
    Restore iPod touch:
    1 Connect iPod touch to your computer. 2 In iTunes, select iPod touch in the Devices list, then click Summary at the top of
    the screen.
    3 Click “Check for Update.” iTunes tells you if there’s a newer version of the iPod touch software available.
    4 Click Restore. Follow the onscreen instructions to complete the restore process. When restoring, it is recommended that you back up iPod touch when prompted.
    When the iPod touch software has been restored, you can either set it up as a new iPod touch, or restore your music, videos, app data, and other content from a backup.

  • My ipod touch is not working anymore, the screen is totally white with no answer to the comand buttons, what should I do? Thank

    Dear Friend,
    My ipod touch stopped working since one week ago.  The screen is totally withe with no reaction of the butttons.
    I would like to know if somebody can help me to solve this?
    thank you,

    For a blank iPod or "white screen of death"
    iOS: Not responding or does not turn on
    All the troubleshooting steps in the above are likely to lead you to restoring the iPod. Follow the instructions in this procedure to the letter. Here they are, with emphasis on some easily overlooked requirements:
    Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the other end of the cable connected to your computer's USB port.
    Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release only the Sleep/Wake button.
    Continue pressing and holding the Home button while you reconnect the USB cable to the device. The device should turn on.Note: If you see the "low battery" screen, let the device charge for at least ten minutes to ensure that the battery has some charge, and then start with step 2 again.
    Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears (iTunes icon and USB connector) release the Home button.
    If necessary, open iTunes. You should see the "recovery mode" alert ("iTunes has detected a phone in recovery mode").
    Use iTunes to restore the device.
    If you do not see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links. 
    Select the iPod in iTunes and choose "restore from backup".
    If you still can't get it to work, you have done all you can and only Apple will be able to help.

  • Ipod Touch Dosen't work anymore.

    I have this iPod touch since September. Always work well and all. But yesterday, it stop working for no reason. 2 or 3 hours before, i was listening to it and it was working well. Later in the night, I wanted to see what time is it, and no matter what I was pressing or touching, it doesn't want to turn on. At the time, i was thinking by battery was empty because perhaps i let my music play. But today, i plug it into my computer and nothing happen.
    Someone already got this problem or know about it? Is the battery already dead after seven month?
    Thanks for Help.
    Message was edited by: Skullburn

    Hi Skullburn,
    Try the tips in this article: http://support.apple.com/kb/HT1575#faq3
    The iPod may need repair If the issue persists after trying the tips in the article. You can request repair online, make a reservation to have a Genius at a local Apple retail store take a look at it or call AppleCare.
    https://selfsolve.apple.com/GetWarranty.do
    http://www.apple.com/retail/geniusbar/
    U.S. iPod and Mac technical support: 1-800-APL-CARE (1-800-275-2273)
    -Jason

Maybe you are looking for

  • Intermittent loss of UNC path access on Windows Server 2012

    Hi All, I hope someone can help with a major headache we've been having on two Windows Server 2012 boxes since September this year. Basically, these servers will intermittently lose the ability to browse network shares from windows explorer and the o

  • Problem in resource loading from a JAR file

    My application requires to read a data file using single read operation. The size of the file is 42K. The datafile is packaged inside the jar file with the class files. The piece of code I used is as follows: InputStream in = Mainclass.class.getResou

  • Log4j classes not found in custom RoleMapper (sometimes)

    WLS8.1 sp2, using wlserver ant task to start the server. Not sure if this is the best group, but... I have a custom RolerMapper provider that I can successfully add to a running server through the admin console, but when I try to start the server via

  • Changing basic finish date in Preventive maintenance orders

    Hi Experts, My requirement is to block PP work centre when maintenance schedule the equipment for preventive maintenance. I am making system condition as zero in generated preventive maintenance order but basic finish date is not changing in the orde

  • What are the settings for connecting to a Mac behind a wireless router?

    I have a client with an iMac. His Mac connects to the internet through a wireless router which gets its signal from a cable modem. My Mac is running 10.6. The remote iMac is running 10.5. How do I configure my Mac (Administrator) and the remote iMac