My iPod Touch 2g Mc Model isn't recognized by iTunes and the screen is black. What can I do?
I accidentally turned DFU mode on my Ipod and know it isnt recognized by iTunes and the screen is black. Need help urgently!!!
the IPSW is 4.2.1
Place the iPod in recovery mode and then connect to the computer and restore via iTunes. For recovery mode:
Recovery mode
Similar Messages
-
Hi , my sister got really mad and she banged her iPod touch 5th generation on a table and she banged it so hard that the screen didn't crack but inside the the iPod is damage as in like colors are popping out and the screen doesn't work, can i fixed this?
Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following maybe less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens -
my ipod nano 5th gen is still making the clicking noise but won't play music and the screen is black what's wrong?!
Downloading past purchases from the App Store, iBookstore, and iTunes Storehttp://support.apple.com/kb/HT2519
Message was edited by: michael08081 -
My ipod is on you can here the sounds and everything but the screen stays black, what can i do?
for days my ipod 4g screen has stayed black and i plug in the charger i can hear the sound just cant see the image it just stays black what can i do? is ti broken? what part needs to be fixed?
First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here. -
the buttons of my ipod are not working, that means i cant use the ipod because the scream is black and i need press one of that buttons for use it, what can i do? thanks
You will need to get it serviced.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro 8G RAM 750G HD + OCZ Vertex 3 SSD Boot HD
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
In Memory of Steve Jobs -
Help please, my macbook pro model A 1226 doesn't boot up, i hear the optical drive sound starting but no screen light or booting sound, ive'd tried all redet commands, and safe mode but no luck, can anyone give me an solution to my problem. Tnx
It looks as if there's a problem with your GPU. With a Retina machine, that would mean replacement of just about everything, except, perhaps, the flash storage drive.
Print you kernel panic when you go to your Apple Store appointment. I'm betting that it's a faulty GPU but they will be able to diagnose exactly where the problem lies.
Good luck,
Clinton -
So I have had this problem before, and know that you hold down the top Power button and the Home button, at the same time, for roughly 10 seconds, or until the apple logo comes on.
The problem is, when I press the buttons and the screen goes black, like it's supposed to before the logo pops up, the apple logo isn't appearing.
I was wondering if that's because my I pod touch was drained when I plugged it in to charge, and I tried to turn it on when it was still charging?
What can I do?Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
my ipod touch 2g is no longer being recognized by itunes why and what can i do i have reset it and everything
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here. -
My iPod touch is switching songs while in it is playing and the voice control is also causing the music to stop at times. Help!
Do you have "Shake to Shuffle" on?
http://manuals.info.apple.com/en_US/iPod_touch_iOS4_User_Guide.pdf -
when i plug in my ipod touch (8gb, 3rd generation) it doesn't turn on and the apple logo flashes on and off. before this it wouldn't turn on unless it was plugged in.
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
I dissabled my ipod touch 4th generation. It says connect to itunes, and i did what it say to do but the "connect to itunes" screen never shows up...it just goes back to the "ipod is dissabled connect to itunes screen. What do i do?????
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
My iPod touch 4g has ruined 3 pairs of my headphones and my speakers aren't working, can I get it replaced for free? Or do I have to pay for it to be replaced?
As I said in my previous reply:
If defective, Apple will exchange the iPod at no cost unless they have been abused. That applies to Apple earphones too.
Apple Retail Store - Genius Bar -
While restoring my iPod Touch second generation computer is turned off the screen goes black what do I do?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
I updated my ipod Touch 4g directly on ipod using wifi. on itunes too it shows ios 6.1.2, but when I try to restore it, itunes downloads the software again. What can I do now?
Let the computer/iTunes download it. That is how Apple has it set up. When you restore via iTunes the IOS is reinstalled on the iPod. Thus, it needs to be on the computer.
-
My ipod touch is trying to download a song from itunes and an app from the store. Both are waiting, and won't dowload. Is there a way I can stop them dowloading? Doesn't seem to be an option to
Create a iTune and App Store account without credit card
1. Go to App Store and select a free app
2. Tap INSTALL APP
3. Create New Apple ID
4. Confirm Your Country
5. Agree with Terms and Conditions
6. Fill in your Apple ID and Password (must be a valid email address)
7. Create and answer your secret question e.g. What is the name of my dog?
8. Select NONE for Payment Method
9. Fill in Billing Address i.e. your address
10. Submit application for new Apple ID
11. Wait for verification email
12. When email arrive, verify your account
13. Start downloading your free apps
Maybe you are looking for
-
Unable to Edit Price Lists in Advanced Pricing Vision Instance
Hello I have a new Vision Instance for 12.1.3 and when I switch responsibility to Oracle Pricing Manager Vision Operations I am unable to edit and of the price lists or modifiers that are in the system by default. any suggestions on what I need to up
-
Move Excel file to Archive and add timestamp to file name
I have SQL Server 2012 and using Excel Source and OLE DB Connection to import Excel data to DB. Currently file is located on C:\\Excel\filename.xlsx. I'm using File System Task to move file to C:\\Excel\Archive\filename.xlsx after Import Task. Now I
-
Tuxedo Version Interoperability
I need to call Tuxedo services from an existing multithreaded application. In looking at the Tuxedo documentation, it appears that Release 7.1 is the first release that is threadsafe, so my application will need to use version 7.1. However, the Tuxed
-
hi friends this is siva... I'm new to java enveronment.. can any one reply my question plz.. 1.there are 20 threads are waiting in the waiting pool with same prority how can you invoke 15th thread from waiting pool?give me small example? thanks siva
-
i love imovie and always use it with my Sony HDR-SR5 and it works seamlessly, but today whenever i tried to import my videos to my computer it would "unexpectedly" close and i tired it multiple times, and reported it to apple. Any suggestions? Please