My Ipod Touch 2nd Gen Only Charges To 20% and Lives For Like 10mins Then Turns Off? HELP!

Theres These Little Rod Like Things Where You Plug The Charger Into And Some Are Bended or Missing And It Only Charges To 20% and Lives For Like 10mins Then It Dies I Dont Know What To Do.

Not Charge
- See:      
iPod touch: Hardware troubleshooting
iPhone and iPod touch: Charging the battery
- Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use.
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
  Apple Retail Store - Genius Bar                 

Similar Messages

  • After upgrading iPod Touch 2nd gen some apps sync over and others do not

    After upgrading my iPod Touch 2nd Gen to OS 3, skype and TextFree Unlimited sync over, but 9-Toolbox, Gas Cubby Lite, fring and TooDoo do not. They show up as installed in iTunes, but do not sync onto my iPod Touch. Is this because the apps themselves have not been updated to work on OS 3, or could there be a syncing problem?

    OK..last post on this item. I found this post by ipodtouchuder1517 that explains how to move your icons around, ie page 2 to 3, etc
    All is well again and I shall now resume checking out the new features my $10 purchased!
    Page 18 of the manual:
    "Customizing the Home Screen
    You can customize the layout of icons on the Home screen—including the Dock
    icons along the bottom of the screen. If you want, arrange them over multiple Home
    screens.
    Rearrange icons:
    1 Touch and hold any Home screen icon until the icons begin to wiggle.
    2 Arrange the icons by dragging them.
    3 Press the Home button to save your arrangement. "
    http://manuals.info.apple.com/enUS/iPod_touch_2.2_UserGuide.pdf

  • Yesterday my iPod touch's home button would not work and to day it is completely turned off and wont turn back on and it is fully charged and when i connect it to itoons it dosent reckinise it

    yesterday my iPod touch's home button would not work and to day it is completely turned off and wont turn back on and it is fully charged and when i connect it to itoons it dosent reckinise it

    Given the information supplied, it sounds very similar to what happened to my wife's 4.  Locked up...came back on with a blank (bluish) screen...could here emails and text coming through.  It would get very hot as well.  Our local apple store tried two times to rescue it, ultimately rendering it complete inoperable.  I'm sorry to say in our case we had to buy a refurb and trade in the phone for $150, which actually wasn't a bad deal.
    There could be other information I'm missing, but I would start with seeing if apple can restore your phone.  If they can't, then I'm pretty sure it's dead.

  • IPod Touch (2nd gen) not recognized by computer and iTunes

    When I connect my iPod Touch to my laptop, running Windows 7, neither the computer nor iTunes recognizes my iPod. Everything worked before with Vista.
    When I plug the iPod into the computer the iPod does turn on put the battery doesn't charge and the iPod does not show on the Device Manager.
    I have gone through and uninstalled and the reinstalled iTunes, QuickTime, Apple Software Update, Apple Mobile Device Support, Bonjour and Apple Application support. With no positive result. In fact I have done it twice.
    In going back to make sure everything had installed I have noticed several things.
    The Apple Software Update, Bonjour, iTunes folders and Common Files are located in Program Files(x86) There are also copies of the Bonjour, iPod, Common Files, and iTunes folders are also located in the Program Files folder. Are these file locations correct?
    Also, I have read somewhere that there should be usbaapl.cab, usbaapl.inf, usbaapl.sys files. I can't find any of these file. Are these files necessary?
    Any help will be appreciated.

    greetings rkonrv and welcome to Apple discussions !
    it seems your have seen this KG then.
    maybe this tip by Beebopp (though a little off topic) will provide some pointers:
    +This solution is very similar to one above but worked for me. Am using iPod Touch 2nd Gen with 32 bit version of Windows Vista where the iTouch is being seen by Windows but does not show in iTunes. In my case it was being identified by Windows as a camera. I tried un-installing and re-installing iTunes and all the other Apple apps with no luck. Was almost ready to throw in the towel when I did one last search for alternate solutions and found the following instructions to reinstall the drivers, but instead of having the system look to the c:\Windows\inf or c:\windows\system 32 folders for the drivers, the path is changed to C:\program files\common files\Apple\Apple Mobile Support\Drivers, which is apparently where Vista installs the drivers. Once I changed the path the driver properly reflected the iTouch as a USB device, and not a digital camera. Try this if you are having similiar issues.+
    +Here are the steps:+
    +1. Verify you have the following files usbaapl.cat, usbaapl.inf & usbaapl.sys in the following directory "C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers"+
    +2. Log in using an ADMINISTRATIVE account+
    +3. Single left click on START+
    +4. Single left click on RUN (You may need to change the start menu to 'classic view' to see RUN, you can change back after if you like)+
    +5. Type in " devmgmt.msc " then hit Enter (Don't type in the quotes)+
    +6. Look for Imaging in the Device Manager window, and click on plus sign (In Vista you may not see the "Imaging" option. Look under "Portable Devices" as an alternative)+
    +7. Now you should see " Apple iPod " as a device underneath Imaging (or Portable Devices)+
    +8. Right click on " Apple iPod " then single left click on Properties+
    +9. Single left click on the " Driver " tab+
    +10. Single left click on " Update driver "+
    +11. Select " Install from a list or specific location " or "Browse my computer" whichever shows on your version of Vista+
    +12. Single left click on " Include this location in the search " if shown+
    +13. Paste " C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers " (Don't type in the quotes) into the box " Include this location in the search "+
    +14. Single left click NEXT and keep clicking through until " Apple iPod USB Driver " is detected, if no list appears then you should see the little animated circle thingie spinning. It's looking and working. Be patient.+
    +15. Hopefully you will get a successful message.+
    +16. The correct drivers(s) are now installed.+
    +17. Start up iTunes, and see if you iPod is detected again.+
    good luck !

  • HT1923 My iPod touch 2nd gen couldn't sync with itunes an unknown error occured then I tried shutting it off and now it won't turn on or off

    I have an iPod touch 2nd gen When I plug it into the computer it says iPod can not sync because of an uniknown Error 0XE8000065. I tried turning it off but it seems frozen on a black screen. Now it won't turn on or off. 

    Hold both Home and Sleep button for around 10secs until you see the Apple logo then release.

  • Ipod touch 2nd Gen connects to the internet and then quits

    I have a 2nd gen Ipod touch that connects to the Internet and then it quits. I will then get the message the Ipod can not connect to the Internet.
    I have a Linksys WTR 610n wireless router (I have upgraded to the new firmware). My Ipod worked fine for about almost 2 years and then it started dropping the connection. I am not sure if was as a result of upgrading the Ipod to 4.2.1. but things started to go bad right after. It will connect from anywhere from 1 min to 20min and quit.  I can't downgrade to a previous OS the Ipod because I don't have a previous version of the firmware. Also Apps and Apple remote will not connect to Itunes when the internet shuts down. The Ipod recognizes all of the wifi routers in the area and its shows that it connects but then still nothing works.
    Sometimes it just says it won't connect to the server. I have tried no security, WEP WPA and WPA2.
    I have also tried:
    1) restoring my IPOD;
    2) resetting the network settings;
    3) rebooting the IPOD;
    4) forgetting the network and renewing the network lease;
    5) rebooting the router;
    6) resetting the router;
    7) upgrading the firmware of the router;
    8) setting the router to "G" only;
    9) setting the router to "N" only;
    10) praying to Steve Jobs; and
    11)
    I think that is everything that I could find on the discussion or elseware. If any one knows how to fix this, I would be extremely grateful.
    Thanks
    Dean8888

    My 2nd gen works fine with WPA2 and AES encryption.
    You may need to go back and start over.  Reset the router back to factory defaults, log on as the admin, set up security, DHCP, and make sure the IP address pool has enough IP addresses to lease to ALL of the computers/devices that will connect to that the router.

  • IPod Touch (2nd Gen) not charging properly and apps won't update

    Hi, I'm not really sure if or how these problems can be linked, but I thought I'd put them together just in case...
    My first problem is that my apps aren't updating properly.  When I try to apply the updates, I get the "waiting" come up but then it just resets having done nothing, sometimes needing me to switch my iPod right off and on again before I can use the app again.  I tried connecting my iPod up to my computer to apply the updates through iTunes and it seemed to work, but none of them actually updated.
    Having connected to iTunes and tried to sync everything, I also got an error message saying that the apps couldn't be synched due to not being able to determine what apps were on my iPod.  However, they were all sitting there looking like they had synched.
    The second part of the problem is that my iPod doesn't seem to be charging properly anymore.  The battery doesn't seem to be lasting as long as it should and I've noticed that sometimes when I'm charging it, I get the symbol come up that means it's running from the mains, when it should actually still be the symbol to show it's currenty charging, so I'm wondering if the problem is that it's not charging properly some of the time rather than the charge isn't lasting long enough.
    If anyone's got any ideas how to resolve any of this I'd really appreciate it
    Thank you
    amethystar

    Sounds like your power receptacle jack may be bad. See repair options in link below.
    Troubleshooting 101
    Some topics covered
    -Basic troubleshooting steps
    -Hard reset instructions
    -Manual restore instructions
    -Hardware troubleshooting
    -Preventive Maintenance
    -Anti-theft & recovery tips
    -Battery-saving tips
    -Repair options
    -Contacting Apple
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
     In Memory of Steve Jobs 

  • How do I get a iOS update for my iPod Touch 2nd gen.? Where's the love for us?

    How come no updates for iOS for 2 gen iPod touch owners like me?
    Where's the love for us?

    Did you think that your ipod would get software updates forever?
    Really?  This is noting new or unusual at all. 
    The older hardware in computers/ipods/iphones/televisions/dvd players/cars/etc does not support any and all new software that ever comes out.
    Your ipod touch operates as it always has - with several updates from the original software.  However, the newest software is not available for the 2nd gen.

  • Im having problems with my iPod Touch 2nd gen. It's disabled and tells me to connect to iTunes. But when I do that, iTunes wont detect the iPod.I have put the iPod in USB- mode, and by that I mean I have tried connecting with holding the home button Help?

    It's disabled and tells me to connect to iTunes. But when I do that, iTunes wont detect the iPod.I have put the iPod in USB- mode, and by that I mean I have tried connecting with holding the home button when connecting the USB. Help?

    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                         
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: Back up and restore your iOS device with iCloud or iTunes       
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        
    If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.

  • IPod Touch 2nd gen in recovery mode, stuck in "waiting for iPod..."

    Before posting this topic, I did some searching for the same problem that I had, but I noticed that no one had the exact same problem as me. Most people get error messages in the middle of their restoring or something, but I don't get any error messages at all. The progress bar on my itouch would be full, and it'd stay like that for hours. When I restart my ipod THEN would a message pop up saying I have the (9) error..
    Please help!

    I am also having the same problem after trying to upgrade yesterday. I have uninstalled ITune and reinstalled and still have the same problem. Do anyone have any ideas on how to fix this problem so I can use my IPod?

  • Windows 7 64 bit, iPod touch 2nd gen, iTunes sync issue

    I have Windows 7 64 bit Home Premium and am frustrated to death. I have spent days wiping out my iPod trying something different an only to start all over again. I am not a n00b to computers and only ask because I only find a trail of tears and none of the problems I see look specifically like mine.
    I have been following this issue since Feb 2010 and notice reports that are sort of similar back to Jan of 2009. Anyway here is my problem.
    iTunes will recognize my iPod touch 2nd Gen. iTunes will "sync" apps and data. iTunes will not sync movies, music, books, or software upgrades.
    I get an error code that changes depending on what I am trying and seems to lead to no where. I can't honestly remember the code anymore.
    I can sync with this same computer using Windows XP 32 Pro win a VirtualBox VM, but can not do it directly from within Windows 7. So hardware and drivers are not the issue. I reinstalled iTunes with a Vista 64 bit install that I found online which appeared to work temporarily then ultimately I ended up back where I started.
    I actually switched to Windows (from linux) because I got tired of the VirtualBox method. Quite ironic that I am still facing the same issue.
    On top of the not being able to sync properly from Windows 7 64 bit. Everytime I try I have to put in hours of work to get my Ipod back to working order as iTunes only allows you to sync with one computer and is slower that snail poop in January. In order to try again I have to be willing to commit to the problems that I am most likely to encounter.
    So my questions are
    1. Does anyone have a clue why Apple has not fixed this issue? or is there a solution I don't know about?
    2. Is there an easier way to attempt a fix that does not require me to re organize my 70+ apps on my iPod?
    P.S. I do not have an intel based chipset as that seems to have been an issue for others. I have
    ASUS M2V VIA K8T890 AM2 Mother Board
    CPU AMD|A64 X2 4600+
    VGA EVGA GF 7300GT
    Have tried direct to MB USB and through powered Hub

    Are you sure that you downloaded the 64 bit version and not the 32 bit version?  I would delete the download and try again.  You also might want to look at the iTunes forum since youu have an iTunes problem and not an iPod problem.

  • I just replaced my ipod touch 2nd gen with another how can i get my itunes back

    i just replaced my ipod touch 2nd gen with the same model and cant seem to get my iyunes back

    Don't understand question, Changing iPod shouldn't affect iTunes on the computer you sync with.  Plug in new iPod, it should take you through some screens of options asking how you want to setup the new iPod.
    Just did this when going from 7+ year old iPod video to iPod Touch 5th gen.

  • Nike + app missing on iPod touch (2nd gen) after restore

    Memory errors prompted a wipe and restore of my 32GB iPod touch (2nd gen) system. The restore and subsequent reapplication of the 3.x upgrade produced a system without Nike+ software.
    I've had considerable issues with the reliability and accuracy of the software in the past, but now it simply isn't there.
    Has anyone else seen this and does anyone know how to restore that application? (Since it is not available in the app store.)
    Thx

    Well, i have the same problem, but when i go to settings the nike app it just doesn't appear, so, i'm not able to turn it on. Is there any other way to download the nike app?

  • Can i trade in my ipod touch 2nd gen for the new ipod to reduce the cost of the new ipod touch?

    My ipod touch 2nd gen is had drop once and there is a grey mark on the screen.. i was thinking, can we trade in our old Apple product for a new 1?
    I don mean to say exact trade.. maybe reduce in price for the new 1.. =)

    Hmm.. I am from Malaysia.. so gazelle cant.. i think i may opt to get the 10% discount if i am goin to get the new 1.. =)
    Btw, do you know how?

  • Restore iPod Touch 2nd Gen.

    I would like to restore iPod Touch 2nd Gen. But iTunes keep saying "Waiting for IPod" for 2-3 hours and nothing happend. What should i do please?

    Reboot the computer.
    Try another USB port
    Try another cable
    Try DFU mode and then restore
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    Try on another computer
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar                       

Maybe you are looking for

  • Pdf with audio to air to android (apk)

    Hi, I need from my PDF (with incorporate audio) to convert in air application and from air to apk (android application: on froyo  2.2) Somebody can help me please? M

  • How to pass a JavaBean from servlet to JSP?

    Hi there, I am working on a project that needs to handle quite a few client requests and I want to use the Front Controller pattern that is described in the J2EE pattern page. The steps described in the front controller pattern is that: 1. A servlet

  • ADF Security not working 401 error

    I am having problems with securing my ADF using LDAP after the server I was using was rebuilt and all software re-installed..... This did work before the rebuild so I am guessing that there are some settings that were no configured after the rebuild.

  • Sorting application folders

    hi there, i think i can answer this myself but just in case my head ain't right, how can you sort an application folder, ie. have the sub-folders at the top alphabetical then the application objects at root sorted alphabetical. cheers, paul.

  • File drag/drop no go

    I have an PowerMac G4 500 (OS 10.4.11 - 1.5 Gig RAM). Not a huge modern, but functional computer. I have two external drives (ACOM data firewire drive - 1.2 Gig + Western Digital MyBook 500 gig USB drive). Problem: every so often I am restricted from