My ipod touch 2nd generation is unresponsive. When I try to connect to Itunes it is recognizing it as an iphone. I can't do anything. Please help.
My ipod touch 2nd generation is unresponsive. When I try to connect to Itunes it is recognizing it as an iphone. I can't power up or reset anything. Please help.
Place the iPod in recovery and then connect to your computer and restore via iTunes. For recovery mode:
iPhone and iPod touch: Unable to update or restore
Similar Messages
-
My ipod touch 4th generation got stuck on a white screen while i was trying to use an app, it won't turn off or anything, PLEASE HELP
Let the battery fully drain. After charging for at least an hour try:
iOS: Not responding or does not turn on -
I have an ipod touch first generation and it is telling me to connect to itunes but it isn't recognized by itunes when i try to connect it. what do i do?
Try disabling your security software and turning off the Firewall on your PC.
Disable antivirus software
Turn Windows Firewall on or off
iOS: Device not recognized in iTunes for Windows <--- definitely try the instructions for resetting the AMDS. -
My iPod touch 2nd generation does not sync my contacts. I only have iCloud contacts in my address book. How can i sync that?
I do not fully understand you question. To use iCloud on an iOS device requires iOS 5 and the 2G only goes to iOS 4.1.2 and thysyu can't access iCloud, including contacts.
Maybe you could sync the iCloud contacts with anopther program and sync that program with the 2G iPod.
The following smple states the following for Contacts:
iCloud: What if my device or computer doesn't meet iCloud system requirements?
Contacts
If you want to check your iCloud Contacts, you can do so by visiting icloud.com from a Mac or PC (as long as it meets the browser system requirements for icloud.com). -
Apple Ipod Touch 2nd Generation is Unresponsive
I have an apple ipod touch 2nd generation. It is unresponsive and won't do anything, even if it is being charged. How do I get it to turn on?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Ipod touch 3rd generation wont turn on or reset or connect to itunes! HELP!?
my ipod touch 3rd generation wont turn on. it wont reset or connect to itunes either and nothing i have tried so far has worked.
i am having the same issure and i did put it into recovery mode and itunes tells me to restore, but when i click restore it tells me that "software for this iphone is not currently available. make sure you have the latest version of itunes and try again" but it's obviously not an iphone.
-
My iPod is disabled
Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. You have no iCloud since that requies iOS 5 If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes. If yo do not have a backup yo can't restoe from backup
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
Ever Since I took it apart trying to to fix the headphone jack which need tightened because only one side was working
Everything seems to be working fine when I double click the home button the music play thing shows up, but when I try to press play to touch it it want play, ever since I took it apart a piece of thescreen that was connected to a black part got broken off (not the screen but the black part),and now it closes in all corners except the one where it was broken, but I put it back in place it's just not connected to the screen.
-
Hi,
My password was entered in wrong too many times and now my ipod is disabled. It said to connect to itunes so that is what i did but it said that i need to put my password on my ipod. What do i do? Can you please help me?Before rettoring you need to place the iPod in recover ymode and then restore. For recovery mode:
iPhone and iPod touch: Unable to update or restore -
Hi,
I did all the steps, that were mentioned above, but still I am not getting free option.
Please help me out.
ThanksDid you create a new account using an email address not used with Apple before?
Maybe your county does not allow a None.
I am in the US and created a None account using those instructions. -
I have an Ipod touch 2nd generation with version 4.2.1 IOs and it is no longer recognized as a device when I plug into my computer. This means I can not change synch settings - any ideas on what I need to do ?
See:
iOS: Device not recognized in iTunes for Windows
I would start with:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
or
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP -
I have just aquired an iPod Touch 2nd Generation 8GB. When it is connected to my PC, running Vista home, it says it has synced successfully but I can,t transfer onto it an album I have bought and downloaded from iTunes. Help!!! This is my first Apple product so I have no experience and no manual.
Was the iPod previous synced to another iTunes library/computer? If so you can only use the manual method and that only works with music and videos.
iTunes: Syncing media content to iOS devices and iPod
If you want to use this computer as the one syncing computer you need to restore the iPod on your computer
iTunes: Restoring iOS software -
Hi my ipod touch 2nd generation was working fine one night and the next morning it was off and would not power on and not charge and when i plug it into computer it is not reconized nor will it charge. I tried another ipod with the same cord and it works just fine. the battery has been holding charge just fine. i tried holding the sleep wake button and the home button and that or anything else ive tried it has been unresponsive. please give me some advice on what i should do! thank you so much! oh yeah i bought it may of last year.
Sounds like you battery may have went kaput. :(
Basic troubleshooting steps.
17" 2.2GHz i7 Quad-Core MacBook Pro 8G RAM 750G + 120G OCZ Vertex 3 SSD Boot HD -
my ipod touch 2nd generation is no longer reconized in itunes when connected to my computer. I have tried different ipod cables and nothing works.
Hi Imminnie,
Thanks for using Apple Support Communities. If iTunes doesn't recognize your iPod touch, this article may help:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
If issues persist, a thorough removal and reinstall of iTunes would be the next thing to try:
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/HT1923
Cheers,
- Ari -
HT1459 ipod touch 2nd generation not connecting with itunes when plugged in
ipod touch 2nd generation is not recognized when plugged into computer, by itunes or computer
thank youIf you have iTunes 11 turn on the Sidebar. Go to iTunes>View and click on Show Sidebar. You can also do a Crtl+S to show the sidebar. The sidebar is where Devices appears.
Next try:
iOS: Device not recognized in iTunes for Windows
Maybe you are looking for
-
Running a Java program automatically at a specified time
How to run a Java appln automatically at a specified time?
-
How to download older updates in Software Update Service?
Hello, In our company, we have a mixture of Mac OS X 10.6.2, 10.6.3 and 10.6.4 servers. Due to proxy-restrictions, only one of these servers is able to download updates directly from Apple (this one has 10.6.4 installed). We have set up the Software
-
Hi All, I have an object type defined as: create or replace type test_object as object item varchar2(50) , countofitems number(8,0) And I have a table type defined on this object as: create or replace table test_object_table is table of test_object;
-
Recommendation for setting up Data Guard for EBS R12 12.1.3
Hello Experts, I would like to get some experts opinion and recommendation on setting up Data GUARD for EBS R12.1.3 running on Linux based systems. Firstly I would wanna let you all know that I am just geek in this subject matter so do excuse me for
-
While reading recent Java blogs and the likes, I stumbled across a [post on improvements to Java|http://paulhammant.com/blog/at-least-one-unilateral-improvement-to-java.html]. In it, it mentions a [presentation |http://www.adacore.com/wp-content/file