My ipod touch 3 rd generation touch screen stop responding

I have a 3rd generation ipod touch. Suddenly after falling, the touch screen stop working. There is no damage to the screen nor the back or any part of the ipod but it never worked again as touch sensiivity. I reset the system, did the push to reset and when get the red slide bar to shut down its not responding because the screen does not work when touched.

When restoring to factory settings/new iPod fails to resolve a problem that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

Similar Messages

  • My ipod touch 4th generation 8gb screen just broke yesterday can i get a new one or do i have to pay? because i put a 2 year warranty and next year the warranty will end.. can somebody please answer my question asap Thank You!(:

    my ipod touch 4th generation 8gb screen just broke yesterday can i get a new one or do i have to pay? because i put a 2 year warranty and next year the warranty will end.. can somebody please answer my question asap Thank You!(:

    You will need to pay to get it fixed. Check out options in link below.
    Basic troubleshooting steps  
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
     In Memory of Steve Jobs 

  • My iPad2 screen stops responding after about 5 mins, can this be fixed?

    My iPad2 screen stops responding after about 5 mins, can this be fixed?

    Have you tried to give it a reboot? Hold down the sleep and home keys for about 20 seconds. WHen you see the silver apple, let go and let it reboot and see if that helps.

  • Section on screen stopped responding!!!

    So I have an original iPhone and just recently an area of the screen, approximately from the vol down button straight acroos the screen, stop responding. The screen is good everything looks fine but whenever I want to tap something on that area it won't respond to my finger taps. It's just a single line area on the screen that isn't responding not the entire screen. Any ideas on what is going on?

    My son just had this problem. We held down the sleep button and home button at the same time until it finally shut down. Then we waited a few minutes before turning the phone back on. the apple came on the screen and loaded for several minutes, but it did come back to the menu screen and he was able to use the phone again. I hope this works for you.

  • My iPod touch 4th generation's screen is part white but,my iPod still works but I can see only part of the screen.Does this mean part of my screen is broken? Or is there a way to easily fix this? If so please tell me how to fix it.

    I need help on knowing how to fix my iPod touch's screen.

    Apple will exchange your iPod for a refurbished one for &199 for 64 GB 4G and $99 for the other 4Gs.. They do not fix yours.
    Apple - iPod Repair price              
    A third-party place like the following maybe less. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
    Replace the screen yourself if you are up to it
    iPod Touch Repair – iFixit

  • Ipod nano 7th generation touch screen doesnt work

    Ipod nano 7th gen touch screen wont respond only 6weeks old?

    Have you reset it? Hold down the power and home buttons, wait for the Apple logo, let go of the buttons.

  • My ipod touch 3rd generation, the screen freezes with the docking graphic

    Can anyone help to clear the screen with the problem of having the docking graphic. Everytime it boots up this screen appears and renders the Ipod touch3 frozen
    Thanks

    Try here:
    iOS: Not responding or does not turn on
    If the screen continues to show something, let the battery fully drain. After charging for an hour try the article again.

  • Ipod Nano 7th generation touch interface is now screwed with due to apple update.

    Hi, I recently purchased a new laptop switching over from a macbook pro 2010 of which the logicboard died. In this newly configured windows 7 64 bit laptop I downloaded the latest itunes. I then connected my ipod nano 7th generation to it and it requested to format it since it was formatted for a mac. I did so and restored my ipod nano 7th generation. After this however my previously perfectly working nano touch interface (swiping, touch to select) is now completely messed up. This has to be due to the formatting and/or the new nano update or itunes update from apple. I can't even swipe to the right or left to move between screen interfaces on my nano anymore. As well the touch icons require double taps and have rectangular white selection boxes over each icon (NOT NORMAL)
    Overall I am very displeased and want apple to fix this with either a new firmware nano 7th generation update or apple itunes update for windows 7 64bit. I'm thinking of buying a replacement iphone 4 but now that this issue is prevalent how can I TRUST Apple that nothing wrong will occur with connecting a new iphone 4 to my itunes on a windows 7 64 bit PC.
    I am NOT the only one with this issue as you can check out for yourself: http://answers.yahoo.com/question/index?qid=20130727205241AAOmiuC
    REASON FOR POSTING THIS HERE: I want more exposure to this issue. I couldn't get access to customer support since my ipod nano 7th generation is over a year old. This is cruel but whatever, Apple does what it wants and I will post this here to do what I want. Gain exposure to this defect that clearly Apple is not addressing since the above link displays a user with the same issue and posted the problem 3 months ago.
    DO SOMETHING ABOUT THIS APPLE

    Hi ImAMinion.
    Very good question. I should have explained that part. VoiceOver changes how the navigation functions so it's a little tricky.
    From the home screen I got to settings by swiping up and down instead of the normal left and right.
    To open settings I first tapped once on the settings icon so that the box appeared around the icon. Then I double tapped the icon to open it.
    I repeated the "tap once to get the box then double tap to open" process to navigate through the settings menu. Navigate to: Settings -> General -> Accessibility -> VoiceOver -> set to off. Once it's off the navigation will return to normal.
    Hope that helps.

  • X1 Carbon Touch Gen2 (20A7005UMN) - touch screen stopped responding

    Hi,
    I have the Lenovo X1 Carbon Touch, new as of april 2014, and since last week, the touch screen has stopped responding to touch inputs. Before this it has been working and behaving perfectly.
    I have tried to turn the laptop entirely off and on, reboots... No effect. The screen simply acts like it never was touch.
    The HID driver is present and claims to be working. I tried to reinstall it and it does so with no errors or warnings. I also tried to reinstall the monitor and graphics card drivers. The Tablet control panel icon offers a calibrate option but Reset is disabled. The calibrate doesn't help because it doesn't respond to touch.
    System says it has touch with 10 finger inputs.
    Windows 8.1 Update 1, Enterprise SKU
    Any advice is welcome.
    UPDATE! Touch works when I lay the screen out flat. But if I return it to any angle, it stops working. Is this related to LayFlat mode or is there a connection fault in the display for touch input so only when I lay it flat it has contact?
    Software or hardware?

    I have kept checking on statements from Lenovo about the Thinkpad X1 Carbon for 7 months now, and I have not seen any indication of plans to change the keyboard. I have heard numerous complaints first hand about the keyboard, and the tens of reviews that I have read from around the world the last half year, there is doubt to outright irritation about the 2014 X1 Carbons keyboard and touchpad (the further specs of the 2014 X1 Carbon are of Rolls Royce impression, but because of the ruined keyboard and erroneous touchpad, we have decided not to consider the X1 Carbon further.
    Observations:
    Professionals want a large number of direct, true and tactile keys in traditional locations for efficient work. Lenovo has moved away from this fact by taking away keys, creating a touch strip while there is a touch screen already on it, and by changing the position of essential keys or removing them completely to be replaced by non-intuitive key combinations. The Red Dot award was truely earned for the weight and looks of the screen and case, but the keyboard is the weak link that makes the chain weak. Lenovo, Lenovo, Lenovo, what have you done?

  • Ipod frozen  4th generation touch

    ipod frozen on start up screen when trying to update i tunes

    Redundant perhaps, but just to make it clear ... copied and pasted from the support article that likeabird referenced above...
    If you can't turn your iPhone or iPod touch on or off
    You may need to reset. Important: Only reset your iPhone or iPod touch if it is no longer responding. To reset, press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.

  • IPod Tough (2nd generation) home screen wallpaper

    I am really wondering why the ipod touch (2nd generation) can't have a background for the home screen. The ipod touch (1st generation) can have one when it is jailbroken. If it has the capability to have a home screen background, then why can't the 2nd generation have one without having to be jailbroken? It just doesn't seem right.

    It has to have the capability to do so. It can when it is jailbroken.

  • I have tried to transfer files from my windows media player to my ipod but it saysthe device has stopped responding or stopped working.this is the first time ive connected nmy ipod to my new pc.any ideas?

    I have tried to transfer music from my windows 7 media player to my ipod.This is the first time i have tried to use my ipod on my new computer .In the media player it doesnt give me the option to add to itunes library it just give me the option to send to my ipod and when i do this it says that the device has stopped responding or isnt working.Any ideas? coz i aint got the foggiest where i am going wrong.My ipod keeps telling me to update the software,but then will i lose the music thats already on my ipod?

    You should import the music (that is listed in Windows Media Player) into your iTunes Library - on your computer - to add it to your existing iTunes Library. I take it you have moved (or copied) your music from the old computer to the new computer, haven't you?
    Then Sync your iPod to that Library.
    iPods will not respond to Windows Media Player, they're designed to connect to iTunes.

  • IPod Touch 3rd Generation - Touch Screen

    Is there any way to calibrate the touch screen on the 3rd Generation 64 Gb iPod Touch? Mine is brand new, just out of the box a little over a week ago, and I've noticed that the calibration of the touch screen is a little bit off. Just enough to be annoying when browsing the web or using apps because it tends to cause me to press buttons and select things that I don't mean to.
    Thanks!

    There is no direct method of calibrating the touch screen of an iPod Touch. There is a support document from Apple which may or may not help you. Please click [HERE|http://support.apple.com/kb/TS1827] to read it.
    Axel F.

  • My iPod Touch 4th generation's screen is still white. Could somebody please help me?

    My iPod touch currently has iOS 5.1.1. When I was about to use my iPod touch for music yesterday (05/30/12), I saw my iPod touch's screen was pure blank. The only sound my iPod touch makes is the voice control and there were no open apps. Also, there was only music on my iPod touch before the screen was blank at the time and there aren't any broken parts. It is not Jailbroken and I had my iPod touch since last August. My iPod  touch still has a white screen. I drained out my ipod touch's battery and it did not turn back on back to normal, the screen was still white. When I restarted my iPod touch, the screen was still white. I charged my iPod touch and the screen was still white. When I tried my iPod touch in DFU mode, the apple logo/connect to itunes logo never showed up and the screen is still white. I restored my iPod touch, that didn't work and the screen was still white. Is there a techincal glitch? Should I wait for the next update? Did anyone has/had the same problem? Can Somebody help me with this problem? Should I go to the Apple Store? Should I replace it? Someone please help me. I will be greatly appreciated for your help.

    Hi there Gabby,
    I'm sorry to see you are so frustrated. Try holding down the sleep/wake button and home button together, until the device restarts.
    If this still doesn't work, and you have restored your device, it seems like it could be a hardware problem. Book a Genius appointment and a local Apple Store, and they will talk you through repair and replacement options. If you are still in warentee, they will replace it for free. You can book an appointment at the link below.
    Genius Appointments
    Have a nice day,
    Nathan

  • Ipod touch 5th generation battery screen with lightning bolt locked cannot charge or restart.  ive tried everything from new cables attempting to shut down but stays at screen for a few seconds then black screen again over and over

    screen locked up and shows the battery with low red and ligtning bolt and cannot hard shut down or reset just stays there for a few seconds then black screen. hooked up to computer and itunes doesnt recognize it or even shows that it is pluged in.  looked and made sure nothing is broken or metal in ligting port or on cable which would prevent it from accepting a charge. ipod is only a month old and seems like a waste of money if its so hard to try to get an explanation of why this is ive been tryning to get an answer from apple for a week now.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

Maybe you are looking for

  • Issue with classes to send email

    Hi guyz, My requirement is to send smartform as an email as attachment in pdf format  , I done it using function module SO_NEW_DOCUMENT_ATT_SEND_API1 , but the  problem of using that is I cannot change senders email id. so now I chose the option to u

  • FB60 Problem

    Hi. I get the following error when i try to post a vendor invoice in FB60. Tax amount different to expense/revenue account assignment - correct I have checked FS00. Control tab allows tax code of input type and null tax code are also allowed. I am a

  • Material determination with outcome B

    Hi all, We are using material determination functionality. Automatic reason with Outcome B. As per SAP help, the Material is determined at SO level and it is copied over to DO . No availability check in DO and material is not redetermined at DO.This

  • How to Open  a Word document using Developer Forms

    Hi Buddies, Can anybody help me out in this regard. My requirement is like this. In my developer Forms Screen i have one button named resume. if i click that button then that particular persons resume has to be opened which is MsWord file(.DOC)locate

  • Need help here for SAP Business One 9.0

    I want to give SAP Business One 9.0 exam (C_TB1200_90). Is this certification available in Pakistan? If its not available should I give 8.82??