My ipod Touch (3rd Gen 32 GB) won't connect to itunes/computer

It won't connect to itunes or my computer. when I try to turn it off while it's plugged into the computer, it resets back on.
It is not charging in the computer. I don't know what to do.

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar       

Similar Messages

  • Ipod touch second gen not charging or connecting to ITunes / Computer?

    I have an Ipod Touch second generation about two or three years old that has not been charged for a few eeks - tried to charge and reconnect to Computer / Itunes and it will not charge or be recognised on the Computer / ITunes - can anyone help?

    Try here:
    iPod touch: Hardware troubleshooting
    Have you tried a different cable?
    Different USB port?
    Wall charger?
    Another computer?
    iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
    or
    iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X

  • My ipod touch 3rd gen will not sync to pc.itunes file menu sync my ipod is greyed out

    my ipod touch 3rd gen will not sync to pc.itunes file menu sync my ipod is greyed out.and i cant sync or put any new songs.please help me.

    I've gotten the iPod to sync after restoring it and not changing ANY of the music sync settings.  I didn't even click "sync music", I just have it on manual and clicked autofill. 
    After it synced all of the music successfully, I tried to sync a playlist (my recently added), and it's gone bonkers again, it won't sync the playlist's music, or any new music now. 

  • My iPod Touch 3rd Gen, Does not show up on iTunes Devises  4.3

    My iPod Touch, 3rd gen, does not show up on iTunes 10. I feel I have exhausted al avenues. Diagnotics passed all tests but - The Connection Not Found. Continued on with there Help suggestions with no success.

    Which version of iTunes are you using?
    Stedman

  • My Ipod Touch 3rd gen continuously disconnects when connected to another accessory either by cable or aux cable. It disconnects within 30 seconds. If replugged by aux cable it will play properly, but ipod cable disconnects continuously. Any ideas?

    My Ipod Touch 3rd gen continuously disconnects when connected to another accessory either by cable or aux cable. It disconnects within 30 seconds. If later replugged by aux cable it will play properly, but ipod cable continues to disconnect continuously. Any ideas?

    My Ipod Touch 3rd gen continuously disconnects when connected to another accessory either by cable or aux cable. It disconnects within 30 seconds. If later replugged by aux cable it will play properly, but ipod cable continues to disconnect continuously. Any ideas?

  • HT2052 After I purchased , downloaded it and installed it , my Ipod Touch 1st gen restarted and show connect to Itune but Itune does not recognize it, I restarted the PC, the Ipod, now I paid for something that I was thinking will be easy and make my life

    After I purchased , downloaded it and installed it , my Ipod Touch 1st gen restarted and show connect to Itune but Itune does not recognize it, I restarted the PC, the Ipod, now I paid for something that I was thinking will be easy and make my life easy

    See if placing the iPod in DFU mode will allow a restore.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

  • IPod touch 3rd gen stuck in recovery mode and iTunes cannot fix it

    i have an ipod touch 3rd generation with firmware 4.3.4. i was recently playing an app whe all of the sudden my ipod just shuts off. i held the power button but it would not turn on. then i tried just holding and pressing and holding the power and home button on my ipod touch trying to get it to turn back on. eventually the apple logo appeared and i felt relieved. however the usb and itunes screen popped up so i plugged my ipod touch into my computer and tried to restore it. when i plugge my ipod touch in a message popped up telling me that my ipod touch was in recovery mode and had to be restored. so i clicked on restore and waited for my ipod to restore. then another message popped up. it said that my ipod was not approved from apple to be restored. i had no idea what was going on so i did some research. i found that other people have seen an error pop up but with an error number. my error displayed no error number. i thought to myself that that was strange so i tried to restore my ipod agian. then i realized when i clicked on my ipod in itunes that my ipod summery was wierd. the name of my ipod was ipod and the capacity and serial number etc. said n/a. what is wrong with my ipod and how do i fix it? i miss my ipod.

    ok hit the level down sound home and power button at the same time happen to me to really anoying

  • My Ipod Touch 3rd Gen is not showing up on itunes

    I have an Ipod Touch 3rd generation I restarted the i pod and erased its content. The ipod will not tun on or show up on i tunes . It will go to the apple icon then the dotted rottating circle to show it is loading appears but then it frezzes. Ive gone through trpubleshooting on apple's website but still no change.  what is wrong? Pleeeaaasee help!!!!

    See:
    iOS: Device not recognized in iTunes for Windows
    Does it charge? If not it could be the cable or USB port

  • I have an IPod touch 3rd gen that won't see any wifi connections.

    The wifi doesn't work at all. I tried everything besides restoring it to fix the problem and the back where the antenna is has been pushed in. It just loads like it's looking for wifi, but it doesn't find anything. Any ideas how to fix it? :/

    Likely that the wifi antenna got damaged or disconected. The iPod has to be fixed.
    Apple will exchange your iPod for a refurbished one for this price. They do not fix yours. May not be wirh it for a 3G.
      Apple - iPod Repair price
    A third-party place like the following maybe less. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens         
    Fix it  yourself if you are up to it
      iPod Touch Repair – iFixit

  • IPod Touch 4th Gen. Won't Connect to Internet.

    My iPod touch 4th Generation will not to my wifi. The network will pop up but when I click try to on it, it just keeps loading. I've restarted the router but I still can't connect. My computer is working fine though. (It's not an apple product though, just the iPod is.)

    Does the iPod connect to other networks?
    Does the iPod see the network?
    Any error messages?
    Do other devices now connect?
    Did the iPod connect before?
    Try the following to rule out a software problem:                 
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • My ipod touch 5th gen is stuck on connect to itunes screen, but when I connect it it doesn't update or restore my ipod. what to do?

    I've been trying all day to update or restore my ipod but it won't go through without running into a last minute "error".

    Try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable                                                       
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • I'm updating my iPod Touch 5th Gen and it says "Connect to iTunes" and I have, but nothing happens.

    Okay, so, I unlocked my iPod and it said an update was available, so I tapped install. It wasn't connected to a power source, and I didn't think it'd make any difference if I was or not. So, I tapped it, blah, blah, blah, and then it said to connect to iTunes. So, I did, but my laptop didn't make the noise it usually does when I plug in the USB cable, so I tried it over and over again, but still the same result. I've updated iTunes to the newest version, and nothing happened still. So I decided to just cancel the update. But, now, "Connect to iTunes" will not go away from my screen no matter what I try. I've tried looking for solutions online, but none help. So, if someone could PLEASE help me fix this.

    Placing your device into recovery (DFU-Device Firmware Upgrade) mode:
    Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
       1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the
           other end of the cable connected to your computer's USB port.
       2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds
           until the red slider appears, then slide the slider. Wait for the device to turn off.
                  * If you cannot turn off the device using the slider, press and hold the
                    Sleep/Wake and Home buttons at the same time. When the device turns off,
                    release the Sleep/Wake and Home buttons.
      3. While pressing and holding the Home button, reconnect the USB cable to the
           device. The device should turn on. Note: If you see the battery charge warning,
           let the device charge for at least ten minutes to ensure that the battery has some
           charge, and then start with step 2 again.
      4. Continue holding the Home button until you see the "Connect to iTunes" screen.
           When this screen appears you can release the Home button:
      5. If necessary, open iTunes. You should see the following "recovery mode" alert:
      6. Use iTunes to restore the device.
    If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
    Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information.

  • Touch 3rd gen got disabled wont connect to iTunes

    When i tried to plug it in it says i need to know the passcoad for the iPod cause i was locked out but the passcode cant be put in, so then i cannot get into iTunes to reset it

    Try manually connecting the iPod Touch to your iTunes library in recovery mode using the instructions in this Apple support document.
    http://support.apple.com/kb/ht1808
    B-rock

  • My Ipod touch 4th gen. only shows the "connect to Itunes" screen.

    I think this happened after an Ipod update.  I can turn it off and on, but the only screen I get is the "connect to Itunes" screen ( usb cord with arrow to itunes logo).  I have tried to restart, restore, but nothing works.  I have also reinstalled Itunes.  The Ipod is not recognized in Itunes, either.  Any ideas?  Thanks!

    Have you tried the troubleshooting here:
    http://support.apple.com/kb/TS1538

  • My iPod Touch 2nd Gen 8GB won't connect to Wi-Fi

    I've tried resetting the wireless router, resetting my iPod, restoring it even, but to no avail.  What can I do?

    Thanks for your response. I didn't know about this -- just tried it, and I was able to load a web site- but then immediately the connection dropped again.  Tried it several more times, and wasn't able to connect again.  About half of my app icons are just white with no images, I wonder if there is a larger problem going on here....

  • My ipod touch 4th gen is disabled say connect to itunes someone changed my password how can i fix it or how do i do a master reset?

    how can i fix it

    Shut down your device, connect it to your PC or Mac and boot it in DFU mode. In iTunes, select your iPod and press Restore

Maybe you are looking for

  • On iphoto can you delete one than one photo at a time?

    i would like to delete loads of photos from my Iphoto can i do this by selecting them all or do i have to delete the one by one?

  • Problem in printing receipt cash journal

    HI, I am trying to print receipt through cash journal but when i click on receipt button system gives error message "Variant SAP18 does not exist for program RFKORD80" . In set up print parameters for cash journal i have assigned cash journal print p

  • User exit for same price in RFQ /po

    >The following is a client's requirement :- >When we maintain the RFQ document in ME47, the conditions like basic price, discount, freight percentage, etc are getting calculated in the net price but the conditions like freight (Value), insurance (val

  • Key figure non-cumulative/ Inflow / Outflow

    On the tab page Aggregation of a Key-figure, you are able to choose non-Cumulative values with in- and out-flow. What is the exact function of the in- and out-flow fields?

  • [Newbie] Model2 JSP + JDBC + JSTL forEach

    Hi, This is my first post. I'm running into a bit of brain failure over decoupling my JSP view page from the specifics of the JDBC the model uses. I want to avoid the easy route of: Controller - interogates request as default main listing page. - run