My ipod touch 4 's screen went white after i dropped it.

my ipod touch 4's screen went white after i dropped it.i can still see some icons but with difficulty.there is no external damage and i think the touch works.what happened and how much does it cost to repair it?

iPod touch 8 GB
$149
iPod touch 8 GB (2nd gen.)
$99
iPod touch 8 GB (4th gen.)
$99
iPod touch 16 GB
$199
iPod touch 16 GB (2nd gen.)
$149
iPod touch 32 GB
$249
iPod touch 32 GB (2nd gen.)
$199
iPod touch 32 GB (3rd gen.)
$149
iPod touch 32 GB (4th gen.)
$149
iPod touch 64 GB (3rd gen.)
$199
iPod touch 64 GB (4th gen.)
$199
Clearly, it's not inexpensive.  You might wish to try a few things yourself.
First, try a system reset.  It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
Finally, if the Restore doesn't work, let the battery drain completely.  Then recharge for at least an hour and Restore again.

Similar Messages

  • My ipod toch 2gen screen went white

    my ipod 2 gen screen went white this morning.  I leftmy pod on the charger all day and its still white .  Ive tried the hold the sleep buttono for 10 seconds but it hasnt worked what can i do??

    That symptom is covered here:
    iPod touch: Hardware troubleshooting

  • On my ipod touch the screen is white, and i've tried pressing the home button and lock button at the same time and nothing happens... what do i do?

    On my ipod touch the screen is white, and i've tried pressing the home button and lock button at the same time and nothing happens... what do i do?

    On my Ipod touch the screen will not work. I can't slide it to unlock
    Try here >  iPod touch: Troubleshooting touchscreen response

  • When I turn on my ipod touch the screen goes white and stays white.

    When I turn on my ipod touch the screen goes white and stays white.  It plays but all I see on the screen is white.  I cannot change anything.

    It iTunes is asking to enter the passcode then:
    - A data recovery company may be able to help
    - Restore the iPhone from the backup of the iPod. You can then get the data off and then retore the iPhone from the backup of the iPhone.

  • Why is my iPod touch 5 screen unresponsive? I accidentally dropped it and now the screen won't do anything. I've tried resetting it over and over again but nothing is working. Can someone tell me what is going on? Thanks

    My iPod touch is being unresponsive. I accidentally dropped it screen down and now when I go to slide to unlock it, it won't work. I've tried numerous times at resetting it, holding the home and sleep/wake button until it resets, with no luck. The Wi-Fi isn't even connecting. And the notification pull down screen and the pull up screen isn't present either. Would really like to know what is wrong with it. Thanks.

    Try the following but you likely have a hardware problem:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable                     
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • How do i fix my ipod touch the screen turned white and i tried to rest it but it wont work, what do i do?

    I dont have Itunes because it slows my computer down so i dont know how to reset it.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       
    Sometimes the problem is due to a software glitch and seldom reoccurs. However, sometimes it is due to a hardwae problem.

  • On my ipod touch the screen went out and I want to transfer my stuff to my iphone, how can I do that if Im not able to put in a password?

    please help its including important school information. I was planning on getting a new ipod but it was to late.

    It iTunes is asking to enter the passcode then:
    - A data recovery company may be able to help
    - Restore the iPhone from the backup of the iPod. You can then get the data off and then retore the iPhone from the backup of the iPhone.

  • After the most recent update, the screen went white on my touch. Any one else have this prob?

    After recent update of my 4th gen iPod touch, the screen went white. I can still see the background a little but, there is a screen "burn in" as well. I restored it but it did nothing to fix it. AHHHH!

    That happens sometimes.
    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar

  • My screen went white,can`t use the phone,what to do?

    hello,
    my screen went white after i started recharging the phone,sound and buttons are working,but can`t use the phone,what to do
    thank you

    Try a restart.
    Try a reset.
    Try a restore.

  • My daughter tried to open a game on her Ipod touch and the screen went white and I can't get it to do ANYTHING...I've tried holding the sleep/wake button and it does NOTHING, still only a white screen.

    My daughter tried to play the My Horse game on her Ipod touch that she got for Christmas and when she opened the game it said something about sending "push notifications" and gave the choice of "don't allow" or "ok"...we chose "don't allow". After that the screen went white and now we cannot get the Ipod touch to respond to anything. I tried holding the sleep/wake button to try to restart it and it doesn't seem to work. Any suggestions to get this device working again???

    Try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If that doesn't work, try a Restore:
    From iTunes, select the iPad and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad.
    There's more that you can do.  Post back if none of the above solves the problem.
    By the way, I always allow "push."  That allows the app developer to "push" information to your device rather than waiting for you to ask for it.  However, "don't allow" shouldn't cause the problem that you're experiencing.

  • HT201263 after restarting and restoring ipod touch, display is still white screen

    after restarting and restoring ipod touch, display is still white screen. I have done this several times. One time, the display went to the home screen, but immediately went back to the white screen when I plugged it into the charge cord. The music continued to play however. help!

    If you restored to factory settings/new iPod and still have the problem that indicates a hardware problem.
    Make an appointment at the Genius Bar of an Apple store..
    Apple Retail Store - Genius Bar

  • What do i do if my ipod touch screen went white and wont turn off?

    what do i do if my ipod touch screen went white and wont turn off?

    - Try a reset.
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Connect to computer and restore if it appearsin iTunes.
    - If screen still white let the battery fully drain. After charging for an hour repeat the above.

  • My ipod touch screen went white and when i plug it into my computer....nothing happens.  help!

    I went to turn on my iPod Touch one day and the screen went white.  Tried resetting and got nothing.  Tried plugging in to usb port and got nothing.  Neither the computer nor iTunes recognizes my device.  What do I do now?

    By resetting did you see the apple logo? Try pressing and holding the on/off and home buttons simultaneously until the screen goes blank (black) and you see the apple logo. It should take about 10-15 seconds to reset.

  • My ipod screen went white, then turned blank and will not respond to the buttons i touch. it is also able to open up now somehow, so i can see the inside

    screen went white, then turned blank and will not respond to the buttons i touch. it is also able to open up now somehow, so i can see the inside

    Let the battery fully drain. After charging for at least an hour try:
    iOS: Not responding or does not turn on
    If not successful time for an appointment at the Genius Bar of an Apple store.

  • My iPod touch's power button got stuck and then the screen went white.

    My iPod touch 4G was a great device, until I stopped using it when iOS 7 came out back in 2013. Then eventually I got back to using it and then one day the power button started acting a little bit funny and then the entire button got stuck in the device. Eventually I tried to fix it so I opened up the screen and tried pushing the button back up. Then the worst happened, I touched something behind the screen and then the screen froze. Then the screen went white. I could do nothing as the power button was stuck in the device. Then it just sat there, white, until it died a few hours later. So heres my question,
    What do I do?

    See my reply in this discussion:
    Turn on without Home/Power Button

Maybe you are looking for

  • HP Officejet Pro 8500A A910a can't automatica​lly connect to wireless network

        Product Name and Number      HP Officejet Pro 8500A A910a      Netgear DGN2200 Wireless Router Operating System     Windows 7 32-bit  I experience frequent power outs and whenever power is restored I have to reconnect the printer through WPS. I h

  • How to manage transactions in pl/sql instead of java

    Hi, I have created a pl/sql package with a number of procedures and functions. In one of the functions I'd like to manage the transaction, instead of the jdbc driver. The function is something like: update <table> set <column>=<value> update <table>

  • Extract Category, Attributes data in Multilingual

    Hi experts, I'm using the MDMGX to extract the Categories data using the F/M "MDM_COMM_CATEGORIES_EXTR". data is populated (in debug mode) in all languages but, when the XML file created its showing only English language data. did I left any configur

  • The publisher of the extension cannot be verified.

    Hi there, I'm trying to sign a manually created ZXP file using the ZXPSignCmd application. As the plugin comes as a part of a software package and installed by it, I can't generate a dummy certificate and re-sign the plugin using Adobe Exchange facil

  • Comparison of Characteristics

    Guys,    I have got 2 characteristics Sales District and Shipping point which displays 10 10 and 0010 format respectively. I need to compare these 2 characteristics if Sales district = Shipping point - What is No of Quotes ? if sales district <> Ship