My ipod touch 4G doesn't work with my itunes!

It appears a window saying "The iPod can not sync. There is an internal error of the device" I thought it was an error from my ipod but now i have a new one and it appears the same message

Was it an error message similar to one of these?
http://support.apple.com/kb/TS3221
B-rock

Similar Messages

TS2771 My ipod touch 4g doesn't work i didnt have charger at first and when my cousins came over i charged it with his it was full and the next minute it was empty. it gave me the warning sign. After tht it shut off and i ot my charger today and it wont t

My ipod touch 4g doesn't work i didnt have charger at first and when my cousins came over i charged it with his it was full and the next minute it was empty. it gave me the warning sign. After tht it shut off and i ot my charger today and it wont turn on it also gave me a blue light which was kinda like an electric shock. Someone help plz

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

After installing iOS 6 update my ipod touch 5G doesn't work anymore

after installing iOS 6 update my ipod touch 5G doesn't work anymore. Can anybody help me? Please!

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Whenever I try to sync my ipod touch, it doesn't work. The computer seems to get hung. What could be happening?

Whenever I try to sync my ipod touch, it doesn't work. The computer seems to get hung during the back up stage. It says it is backing up the ipod but nothing happens, for hours. I eventually have to interrupt it and give up.

I have the latest itunes.
I tried resetting sync history.
For this section:
If the issue persists, and you know all your contacts, calendars, bookmarks and notes are on your iPhone, iPad, or iPod touch:
Remove all of the contact and calendar information from Outlook.
Select the device in iTunes and click the Info tab.
Scroll down to the Advanced section, and under "Replace information on this iPhone/iPad/iPod touch" make sure Contacts and Calendars are not selected.
Click Apply.
This doesn't seem to make sense for my situation. I don't sync anything between outlook and my ipod touch.
I have no other USB devices connected to my computer.
I have no other Windows users on my computer - only me and I am the administrator. However on my diagnostic, it said this user is not the administrator. Weird.
So I have tried to follow that you referred me to, but still I haven't got it working yet. Do you have any further suggestions?

After purchasing songs at the itunes store, ipod touch will no longer synch with the itunes library at all. Also a lock symbol is now on the ipod touch. How do I fix this

After purchasing songs at the itunes store, my ipod touch will no longer synch with the itunes library at all. It won't send the purchases to the device and it won't synch any other music to the device. Also a lock symbol is now displayed at the top of the ipod touch. How do I fix this.
This was the first purchase I made.

Are you following these instructions?
iTunes: Syncing media content to iOS devices and iPod
Where is the lock icon on the screen?

Ipod Touch STILL won't work with Windows 64-bit

Argh!
So, I've read the entries about the new Itunes 7.6, and how it should work with my Ipod Touch.
I uninstalled all my previous Itunes, and Quicktime software. I then installed the new Itunes64.exe. Everything worked fine.
But then, I connected by Itouch and it says "This Ipod cannot be used because the required software is not installed. Run the Itunes installer to remove Itunes, the install the 64-bit version of Itunes."
I'm confused what the problem is. I just DID that!?! What do I need to do differently? Anyone have an idea?
Thanks in advance!

Hi,
I’ve got the new version of Itunes (7.6.1) but I still get the error where it tells me to download and install a 64-bit version of Itunes. This is just ridiculous!!! I bought my IPOD touch before Christmas and i still haven’t been able to use it!
I've uninstalled and installed itunes and all that rubbish about 5-6 times now, i've deleted everything to do with Apple from my machine and also nearly killed my machine because i messed around with the registry (that's my fault :P)
NOTE: I used IE 64-bit version to download the installer.
Anyone have a solution to the problem?

IPod touch 2G does't work with Kenwood car radio anymore

Hi
since a few days ago, my iPod touch 2G does not work anymore with my car radio Kenwood KDC-W4544U.
When i connect the iPod to the radio, the radio display shows "Reading", which it normally shows for like 5 seconds. But now the "Reading" lasts forever, after 10 minutes of trying to let my radio read the iPod, i have no other possibility but listen to CD or radio...
I have already shut down and restarted the iPod, synched it, even restored it via iTunes. I also tried three different connection cables.
Is this a known problem and is there maybe a solution?
Thanks in advance for an answer

Problem could be solved by hard-resetting the radio

IPod Touch 5G doesn't show up in iTunes. Help!?

I am absolutely infuriated as my new iPod Touch 5G simply will not connect to iTunes and does not show up any more. I have tried everything. Any Ideas?

See
iOS: Device not recognized in iTunes for Windows
- I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Featurs appin the Window Control Panel. Then reinstall all the Apple software components
- New cable and different USB port
- Run this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
- Try on another computer to help determine if computer or iPod problem
For the future, saying you tried everything provides us with zero informatin as to what you did try. If you really tried everything then there is no way would could help.

Ipod touch doesn't work with latest itunes install

Ok, I've been around the block too many times. Somebody, pleez help! I have a 3rd generation ipod touch. Couldn't connect to itunes (previous install for our nano and classic). Uninstalled it. Downloaded fresh, latest, 64bit installation. Tons of problems with Apple Application Support. Uninstalled, reinstalled, uninstalled EVERYTHING (Quicktime, Bonjour, updater, etc.) Used Windows uninstaller and registry cleaner. Reinstalled - iTunes works. Great. Now I connect my iTouch and it says it needs iTunes 64bit to run it. I installed 64bit. What now?

Now I connect my iTouch and it says it needs iTunes 64bit to run it. I installed 64bit. What now?
In iTunes, with the Touch connected, go "Help > Run diagnostics." Uncheck "Network Connectivity tests" and "DVD/CD tests" but leave the other boxes checked. Click "next" and then "next" again. Paste the contents of your diagnostics into a reply here so we can have a look.

Ipod Touch 4g doesn´t work after firmware update

Hello togehther,
i had two times the same problem with my iPod. Apple sent me two times a new iPod, but i don´t want to have new iPods every two weeks, i want to have an ipod that works a long time.
The problem:
-I tried to install Apps, but it didn´t work, iTunes says the apps are "invalid".
-When I update the firmware, at the end, there is the error message "-1" an the iPod hasn´t any firmware anymore. You couldn´t reset the ipod, because the error "-1" comes everytime and you can´t start the ipod anymore, because it has no firmware.
Maybe the problem is because of the apps? Maybe a problem with my iTunes? Or what could it be?
Thanks for help!

The best place to look for help first is Genuine Apple help directly from Apple.
Read the iPod Touch Users Guide.
http://support.apple.com/manuals/#ipodtouch
Also start with the basics from Apple.
1. *Restart iPod touch:* Press and hold the On/Off Sleep/Wake button until the red slider appears. Slide your finger across the slider to turn off iPod touch. To turn iPod touch back on, press and hold the On/Off Sleep/Wake button until the Apple logo appears.
If you can’t turn off iPod touch or if the problem continues, you may need to reset iPod touch. A reset should be done only if turning iPod touch off and on doesn’t resolve the problem.
2. *Reset iPod touch:* Press and hold both the On/Off Sleep/Wake button and the Home button for at least ten seconds, until the Apple logo appears.
For more troubleshooting suggestions, see Appendix B, “Support and Other Information,” on page 214.
And More..........

My ipod touch is no longer working with universal dock since downloading the new OS

I have the Apple Universal Dock. It had been working fine with my ipod touch. I just downloaded the new OS and now my ipod touch will not work with the Universal Dock.
Any ideas?

Hi grecokev,
Thank you for contributing to the Apple Support Communities.
You mention that your iPod nano is no longer recognized by iTunes after an update. Reinstalling iTunes is a good troubleshooting step, and if the device still doesn't appear in iTunes, try the following steps next:
Turn off your computer and your iOS device or iPod, then turn them on again.
Check to make sure that you've installed all required updates for your computer.
Verify that the 30-pin to USB cable or Lightning Connector to USB cable is free of debris and not damaged. If another cable is available, test with that cable instead.
USB cables that are bundled with third-party products or accessories might work only to charge those products and might not transmit data. Also, if you're using a third-party case or extended battery pack, try removing the case and connecting the Apple-supplied USB cable directly to your device.
You can find these steps in this troubleshooting article:
iPhone, iPad, or iPod not recognized in iTunes for Windows - Apple Support
If the steps above don't solve it, see the section of the article called "Verify that Apple Mobile Device Support is installed" for some additional steps to try on your PC.
Best Regards,
Jeremy

Brand new ipod Touch (8GB) does not work with DHCP

I have a brand new iPod Touch (8GB) that will not work using DHCP. No matter what I do (reset router, reset ipod) the DHCP still doesn't work. I can manually setup an IP/Gateway/netmask/etc. and it works but I really need the DHCP to work if at all possible. I'm using a Linksys WRT54G. I was able to use an old Linksys wireless router and the touch gets an IP, etc. with no problems but I can not get my Touch to work with the WRT54G. Any ideas?

its possible to have a bad power supply that has too much AC ripple on the output which can make the screen do weird things
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

IPod Touch accelerometor doesn't work, what can I do?

When I turn my iPod Touch on Safari or Albums, my screen doesn't turn, what can I do?
Thanks

First thing to consider, are you turning holding it vertically or horizontally when you turn? It has to be more or less horizontal for it to work.
If it still doesn't work, setup an appointment with an Apple Genius to test it some more, and more than likely get a new one.

Anyone got the new iPod touch 2nd gen to work with the fatman itube dock???

Hi all,
Recently for christmas I've bought a new iPod touch 2nd gen and it's awesome, everything is great about it - in my opinion; except for the fact that I tried to dock it on the fatman itube docking station and found it not to work. Before I used it I was aware that the 2nd gen is unable to charge on the dock however I didn't expect the speakers not to work too. All that happens is a message on the ipod comes up saying unable to charge with this accessory but doesn't put any sound output into the fatman, it just sits there blasting out it's own quiet internal speaker, and also strangely the remote DOES work too???
I've read on the net that maybe resetting the ipod by holding the home+stand-by switch for 10 secs but this resets and does not fix the problem...
There are many photos on the fatman website showing a ipod touch docked so it seems to be sold as working with it but who's to blame for this fault? Apple or fatman?? And does anybody know of a fix for it?
Also I tried my mums ipod nano with the fatman - works fine, and my firmware on the ipod touch is nice and up to date with version 2.2 so I can't see anything else I can do. This was my christmas & birthday present and at the moment I'm quite annoyed that all I can do to it is stick a mini jack in the headphone socket - not ideal since there's no video output or remote control that way!!!
Please give advice if there is any out there,
Thanks,
Mrghostie.

This is an Answer for a Possible Solution. It worked for me and is still working. The issue I was having with my 64 bit vista, was Apple Mobile Device Service was not being installed, I dont know why. But I disabled any active running program through MSCONFIG, to allow a clean uninterrupted install of ITUNES 8.02. This allowed AMDS and drives from ITUNES to install. Hope this works for most of you.
APPLE, please review your Support Methods. Re-installing doesnt help an issue that resulted from installing.

5th generation iPod Touch speaker is not working with music and apps, but the alarm sound goes off fine. Why?

I have a 5th generation iPod Touch and it got a small amount of water in it around the speaker. When I tried to see if my music would play through it, it couldn't. But, when I tried my alarm to make sure I could still hear it, you could. The sound was fine from the alarm, not as loud as it used to be but I could still hear it. Why doesn't the sound work with my music and apps? Also, would I be able to exchange it if I have a warranty?

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

My ipod touch 4G doesn't work with my itunes!

Similar Messages

Maybe you are looking for