My ipod touch 4g has just been updated to the latest ios but it wont connect to the internet, even though it is wi-fi connected? please help
hi everyone, i've updated all software etc to ios 5.0.1 from ios 4.1 as it has taken me 1 year to figure out how do the update. Everything has been restored and working but i've been able to connect to my wi-fi but still won't let me use the internet, I have done the 'forget network' and re-connected back to my wi-fi but still no connection to the actual internet. Someone please give me some tips or hints. Thank you
Despite the WiFi sign you may not really be connected to your WiFi network.
Your router may not have given your iPod a valid IP address when the iPod requested it. To check on this go to Settings > Wifi > your network name and touch the ">" to the right to see the network details. If the IP address shown starts with 169 or is blank then your router didn't provide an IP address and you won't be able to access the Internet.
Sometimes the fix for this can be as simple as restarting your router (remove power for 30 seconds and restart). Next, reset network settings on your iPod (Settings > General > Reset > Reset network settings) and then attempt to connect. In other cases it might be necessary to update the router's firmware with the latest from the manufacturer's support web pages.
If you need more help please give more details on your network, i.e., your router make, model and version, the wifi security being used (WEP, WPA, WPA2), etc.
Similar Messages
-
Can any one help me with getting my books back into my library after I purchased my new computer. Thanks
Copy them from your old computer, or your backuo copy of your old computer. to your new one.
The music sync is one way - computer to ipod. the exception is itunes purchases. -
My iPhone 3gs is not working properly and hasn't been since about September of last year. When switched on (Quite often it won't even turn on) it says 'Update Completed' as though it has just been updated. On the next screen it says to 'Connect to iTunes'. It doesn't, however, connect to iTunes and just resets itself over and over until power is gone. Occasionally after switching on and off a few times it functions normally for a few hours and some times even a couple of days but eventually always turns itself off and goes back to the 'Update Completed' screen. Does anyone know what might be causing this and/or a way of fixing it?
Morning JordenR,
Thanks for using Apple Support Communities.
You can resolve many restore issues using the troubleshooting steps documented here.
For more information on this, take a look at this article:
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/ts1275
Best of luck,
Mario -
My 2010 iMac has just been updated to osx 10.9 Mavericks
My 2010 iMac has just been updated to osx 10.9 Mavericks & now runs very slowly. Has anyone experienced this problem? Any easy fixes?
The new update(Flash Pro CC release - November 2013) that has a fix for this OSX 10.9 buzzing sound issue is now available to you. This Flash CC update will update your flash version to 13.1.0.217.
You can update from the Adobe Creative Cloud application or from Flash Pro CC Help -> Updates menu.
You will more information on the update at: http://helpx.adobe.com/flash/using/whats-new.html
Thanks,
-Sujai -
Hi, I just got an iPod Nano 1st generation and I plugged it into my computer and open iTunes but it never showed up in iTunes. So then I updated my iTunes to the latest version but it still didn't show up so is there a way you all can help me A.S.AP.
Error 1611
This error typically occur when security software interferes with the restore and update process. FollowTroubleshooting security software issues to resolve this issue. In rare cases, this error may be a hardware issue. If the errors persist on another computer, the device may need service. -
My iPod touch is permanently disabled and it says to connect my iPod to my iTunes yet when I do that, it tells me to type in pass code even though it's still disabled. PLEASE HELP ME
I have the same problem with mine... but im trying to find a way to fix it without restoring it...
but one fix is to shut it down completely ... then press and hold BOTH the power button and the home button .. hold both of those 4 ten seconds .. then release the power button but still hold down the home button .. and then it'll show something that says "connect to itunes" once u get it connected to itunes , click the restore button ... BEWARE THIS WILL WIPE OUT EVERYTHING ON YOUR IPOD!!! IT WILL RESTORE IT BACK TO FACTORY SETTINGS , AS IF U JUST BOUGHT IT !!!!! then it should work fine again .. but u will lose all data on there besides the things you have synced with itunes already..
Thats y im iffy with doing this , im trying to find a fix where i wont have 2 restore it but i dont think there is 1 :'(
good luck tho
~sam -
hi all, complete novice to this so step by step answers much appreciated please. thank you. Ibooks app showing in my itunes apps but wont sync with my ipod touch - have tried deleting app in itunes then re-downloading but still wont sync, any ideas please?
See if this helps
iBooks: Viewing, syncing, saving, and printing PDFs on iPhone, iPad, and iPod touch -
I updated my iPad with the latest iOS and despite backing up all the information prior via iTunes, my iBooks application was deleted along with a hundred important PDFs on it. Is it possible to locate these missing files? Urgently require assistance. Thank you!
Hi Sam,
I understand where you are about being your own IT department, it can be overwhelming ...
What drives to buy depends an awful lot on how you will use them, what your budget is, and your preferences.
In the case of your DP Powermac, for online storage used primarily for editing, I would add one or more internal drives first. Look for drives that are at least 7200rpm and have at least an 8MB cache. 10,000rpm/16MB cache is even better, but more expensive. Seagate Barracudas have always been good choices.
For backup purposes, I'd pick some good external FireWire drives; you can also use these for online editing, lots of people do. Your Mac has both FW400 and FW800 ports - either kind is fine but if you get drives that support both, you would want to connect them to the FW800 port for the added performance.
In my experience, the Lacie d2 Extreme drives have been very very good. In fact I have 3 of them daisy-chained off my iMac G5 right now and they work flawlessly with FCE. Weibetech and Granite Digital drives are further upscale in performance and price. RAID configurations would be even further upscale. Do stay away from consumer level hard drives, however ... the Western Digital MyBook series & no-name drives come to mind ...
Don't use a FireWire hub for your external drives, it's just asking for trouble.
ps. And thanks for your nice comment about me. I'm happy to help, as are other folk in the forum. -
hi... can someone please help me.. i want to download the latest ios, but do not have the software update option in the general settings....
Connect it to iTunes on a computer and update it from there.
(73609) -
i updated my iphone 4s to the latest ios ( 6.1.3 ) and afte the update i found the wifi is grayed .. any help is really appreciated
This is most often a severe hardware fault of the WiFi Chip. But steps to try are, Settings App > General > Reset > Reset Network Settings. See if fixed. If not, Restore iPhone with iTunes on your computer. See if fixed. If not, and if there is Warranty or AppleCare make Genius reservation or set up service and take or send to Apple for resolution.
-
As stated I'm having trouble with my computer, I boot it up and within a few minutes it freezes and I have to restart it, I tried updating it to the latest mavericks but it won't finish the installation it's stuck at the end, what can I do to fix this? I need it for homework tonight.
Crowntheme,
you can try this: boot your MacBook Pro into Recovery mode by holding down a Command key and the R key as it starts up. Once the Mac OS X Utilities menu appears, select Disk Utility. On the left-hand side of the Disk Utility window, select your internal disk’s boot partition (typically called “Macintosh HD”). On the right-hand side, press the Verify Disk button if it’s not greyed out; if it is greyed out, or if it reports that errors were found, press the Repair Disk button. Once the verification/repair is completed, exit Disk Utility and select Restart from the Apple menu to restart in normal mode. Does it still freeze after a few minutes? -
I updated recently to the latest IOS but now the websites screen of Safari would not go widescreen when I put it side way, why? Please fix bug.
During a normal install of iOS 7.0.6 this does not happen but something clearly went wrong in your installation.
To fix this, connect to iTunes and restore to Factory. Hopefully your iPad will be working again and you can restore your iCloud backup during Setup. -
i have iphone 3gs and im update my iphone to ios 6 and after it doesn't work,and i can't restore my iphone please help meeeeeeeee,i neeed my iphone:(
how can i restore my iphone without update?because when i want restore itunes told me restore and update and when i restore and update my iphone take the ios 6 and it doesn't work again...please help mee...tnnnxxx
-
ipod touch 4g has stopped docking with sony stereo cmt-bx70dbi
It appears that the update made the iPd incompatible with the Sony dock. Try contacting Sony. Downgrading the iOS is not supported by Apple.
-
My ipod touch 4th generation got stuck on a white screen while i was trying to use an app, it won't turn off or anything, PLEASE HELP
Let the battery fully drain. After charging for at least an hour try:
iOS: Not responding or does not turn on
Maybe you are looking for
-
Is there a way to stop users from having multiple projects open at once?
I run a video editing lab and this new feature is causing no end of grief as students on one station decide to 'check out' what others are doing on other stations, then they leave these projects up in the background as they work on their project. Cha
-
Camera RAW and Elements Hang during Thumbnail Generation...
Ever since I upgraded to the newest version of Camera Raw, I have been having issues with Photoshop Elements hanging while automatically generating thumbnails, anyone else notice this issue? Hang is not quite the right description... So I import a ba
-
Hello All, We have made a release strategy for PR. in that release status mainatined was X- Blocked and 2 for release for RFQ/PO. Then in configuration release indicator was cheanged from X to 1. We have activated version management for PR document.
-
My Ipod Touch 4's home button is jammed?
Hello, I have had my iPod touch 4 since it had been sold. Amazing product, I love it. BUT, my iPod's home button has been slowly getting harder to press, 'til this morning, it is just stuck. I tried the rubbing alcohol with a Q-tip, pressing down and
-
Ask about role base authentication
I want create login with role base authentication, but i still confuse with some tutorial that i found in google can somebody give me good reference, because i don't understand with how is the step setting in the xml like login-config.xml etc thx