My iPod Touch 4G is no longer accessing my router, yet it can access other routers.
I awoke this morning to find my iPod touch was not connected to the internet, "No big deal" I thought, and went to go connect in the settings. When I went to the settings I clicked on my router and typed in my password correctly, and I waited for it to connect. And waited. And waited. No dice. I turned my iPod on and off again, hoping it would fix it. It didn't. I just went to school without a thought about it. It connected at my school and got full internet access, so I figured it just fixed itself, but when I went home it STILL wasn't working. My laptop and everything else can connect EXCEPT my ipod.
Any help with this?
Also I am running on a belkin router and I use windows 7 if that helps with anything.
I cannot reset the iPod itself as the home button is broken and I use the assistive touch on-screen button, which won't let me reset it.
I didn't even notice the reset thing there :O
I'll try this out and see if it works
It didn't.
I'll try resetting my router.
Similar Messages
-
Ipod Touch 5 will no longer sync after update 7.1.2
After updating from iOS 7.1.1 to 7.1.2 my Ipod touch 5th gen no longer syncs with my iTunes 11.3.1.1 when connecting it to my computer (windows 8.1) what comes up on my touch's screen is "trust this computer?" I press the "trust" button then a few seconds later I get the disconnected tone from my computer and nothing else happens (it still charges) and just checked it out on my Windows 7 computer (iTunes 11.3.1.2)and it recognized it fine (but the other computer has my playlists) I've tried updating to iTunes 11.3.1.2, updating iPod drivers and uninstalling then re-installing iPod drivers and iTunes is still not connecting to my iPod. Help please.
On your computer go to the control panel (hover in the lower right corner) then programs, add/remove programs
Uninstall iTunes, Apple Mobile Device Service, Apple Application Support then go to apple.com and redownload and reinstall iTunes and try again.
You won't lose any content, you're not deleting that, just the programs that access them.
What is thought to happen is that sometimes a new version of itunes doesn't update the drivers in those other two programs. The only way to update the drivers is to force it by uninstalling the programs which allows itunes to write the correct ones.
My iPad and iPod did exactly the same thing and this is how I fixed it. -
Ipod Touch 4G is no longer recognized by Itunes
pod Touch 4G is no longer recognized by iTunes
Today have been the problem that my ipod touch 4G is no longer recognized by itunes. He'll appear in My Computer as a DigitalCamera etc, but not in itunes. I've already uninstalled Itunes + Ipod rebooted and then installed it to try a different USB port + different USB cables, all useless. No jailbreak.
Got it now put into DFU mode and restore to read, unfortunately it is still not recognized by my PC but only on the laptop so I must go to my mum´s Laptop and everything transferred from there again ... pity me here is displayed only when the restore Ipods "Can not restore: errorcode 21" or something like that.I've now uninstalled the USB device driver but now my iPod listed as a "portable device" and no longer listed under Apple MobileDevice
-
my ipod touch 2g is no longer being recognized by itunes why and what can i do i have reset it and everything
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here. -
I want to upgrade my iOS 4 to 5 on my Ipod Touch but I no longer have the original computer I used to sync with so it keeps saying I will loose all of my apps and stuff on my new computer..... SO how do I tell it that my new computer is now my regular computer so that I can upgrade my iOS on it without it wiping all of my music, films and apps on it??? HELP please I am desperate to know what to do.
http://support.apple.com/kb/HT1848 - just media purchased from iTunes Store
Post by Zevoneer: iPod media recovery options - https://discussions.apple.com/message/11624224 - this is an older post and many of the links are also for old posts, so bear this in mind when reading them.
Commercial software utilities for transferring songs from i-device to Mac:
Senuti - http://www.fadingred.com/senuti/
Phoneview - http://www.ecamm.com/mac/phoneview/
MusicRescue - http://www.kennettnet.co.uk/products/musicrescue/ - Mac & Windows -
My iPod touch charges but no longer plays thru my Onkyo or Phillips home theater systems. Works fine with friends iPhone and both systems worked fully with this iPod in the past.
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
iOS: How to back up your data and set up as a new device
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
I have all my music on my ipod touch. I no longer hav ethe pc that stored my music. Can I get my music to cloud by activating it with my ipod? If not how do I get my music back on my pc?
iDevices are not and have never been backup devices.
The content should have been copied from the old computer to the new computer or at the very least from the backup of the old computer. -
My ipod touch(4th gen)no longer syncs to itunes 10.7 via USB
My ipod touch(4th gen)no longer syncs to itunes 10.7 via usb. i knew it didn't work via wifi with the new updates but this is too far. i can't see it in itunes at all anymore. i restarted my ipod already still with no results. the only thing i did is create and delete playlist from the ippd and deleted others from itunes as well. i've done it before but this time i assume it's led to this. any suggestions?
Disregard. It seems i just needed to install an optional update with windows update. either that or just restart my computer instead of my ipod. silly me.
-
I just got an iPod touch. Now I cannot access my music on my Nano when it is connected to my computer (all the titles are in gray). How do I fix this?
That sounds like you've engaged one of the automatic syncing options for your nano.
Plug the nano in, and go into the Device screen for the nano in itunes. Is "manually manage ..." unchecked? If so, check the box for it, and click okay. Disconnect and reconnect the nano. Is the content on the nano able to be selected in your iTunes now? -
My ipod touch 4th generation no longer holds it's charge for more than 40mins from full power, think it needs a new internal battery but have no idea how to go about this and am no longer covered by my guarantee. Can anyone advise me on what's best? Thanks in advance
Using the battery level meter in this manner is comparable to using your car's fuel gauge to calculate miles per gallon. The only thing that matters is the total amount of operating time from full charge to auto-shutdown.
Use an Apple wall-mount charger. Do NOT use a computer's USB port. Then, operate it normally until auto shut-down (ignore any low level alerts that may appear). An irony is that doing that test to determine the total operating time is also the exact procedure necessary to calibrate the battery level meter.
I'm not claiming that you do not have a problem. I am stating, however, that we don't yet know whether or not a battery problem exists.
According to Apple:
Use Your iPod Regularly
For proper reporting of the battery’s state of charge, be sure to go through at least one charge cycle per month (charging the battery to 100% and then completely running it down).
Elsewhere, Apple elaborates and explains that two half-discharges (or four quarter-discharges, etc.) equals one full discharge. -
Is the iPod Touch 2nd Gen no longer usable? Is this what is store for all Apple products?
I am very disheartened with Apple. I have loved the iPod touchs up until now. It seems the iPod Touch 2nd Gen no longer download apps that work on the 4.2.1 iOS. I was just selling my wife on Apple products and now this has shut her and I down on all Apple products. I hope I am wrong but is Apple partaking in planned obsolesence? If so, planned obsolesence is not marketing and I will be looking at other brands when it comes to electronic devices. If not, how do you download apps for an iPod touch 2nd gen running a max iOS of 4.2.1? Thank you.
Don't despair Look at "Vintapps" in the Apple app store. It has tons of available apps for all those earlier ios devices. And you can download them right to your ios device. Many are free.
Although I wrote this 99 cent app specifically to help solve this problem, I need to add that "I may receive some form of compensation, financial or otherwise, from my recommendation or link."
Be sure to keep backups of older software. Once an app is updated, the older version is no longer available to be downloaded from Apple. -
My daughter forgot her passcode on her brand new ipod touch. How do I access it now? The message reads, "ipod disabled". I've tried holding the on/off button and home button until I see an apple. Then asks me to connect to itunes. When trying to connect to itunes, it will not let me as it asks for the ipod touch's passcode (which we do not have!) What next?
Did you use the instructions I provided in the document above? It can be a bit tricky getting the device into recovery mode. Try a few more times.
What happens if you try DFU mode?
http://www.iclarified.com/entry/index.php?enid=1034
B-rock -
My iPod Touch 4S is no longer able to update applications (They just sit and wait forever). How do I fix this?
restore or reset your ipod. there is a problem with ipods atm so the best you can do is wait if neither restoring or reseting works.
-
My ipod touch 4G got problem after update to iOS 6, it can not access the Apps store ,can not access safari,map, weather and so on, could someone help me to solve the problem, thanks in advance~~~
Force close the App Store app and reset the iPad. No data will be lost when you reset the device.
In order to close apps, you have to drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it.
Next, reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up. -
My iPod touch is not synced and I locked myself out, how can I access it without erasing the device?
You will have to restore.
Maybe you are looking for
-
I am posting the GL a/c line items using BAPI_ACC_GL_Doc_post ...!! In the flat file , i get the dates as '01/01/2006' and i convert it to 8 format by using : split and concatenate . The internal table (line_t) for line items has posting date as '010
-
Components are not visible in the beginning..
Hai .. The contents(TextFields Labels and Buttons) of my application are displayed only after i resize the frame manually.. Why is it so.. Is there any way to make them visible as soon as i run the application.. This happens only for the first time(i
-
i created a movie in imovie. then i shared it to idvd and created a dvd. no matter if i do it in 16;9 or 4:3 when i watch it on most tv screens, parts of it are cut off at the top. is there any way to avoid this?which is my betst choice 4:3 or 16:9?
-
PL check the 3rd response againts this what is the name space in SAP. any one up for blog on cheating101? ~Suresh
-
Bootcamp problem with clock never in sync
Hello, I recently upgraded to Mac OS X Snow Leopard and shortly thereafter, I installed Windows Vista Home basic using boot camp. Now, however, no matter how hard I try, the clock in Mac OS X and the clock in vista are never in sync. Even if I go int