My iPod touch 4g will charge but is not recognized by computer

I have done everything I know to do. My iPod touch 4g will charge from my computer but will not sync and is not recognized by the computer. I have tried it on 4 different computers and my brothers iPod touch 3G works and so does our iPad 2 but something is wrong my with just my touch 4g. Both of them have updated to the ios5 and I have not. I did the extremely stupid thing of resetting it and now it's just stuck an the original start up screen. So I can no longer even get into my touch. My 90 day has expired as well.
Please someone help me. My brothers have spent hours looking for ways to fix it but can't find anything. Nothing is working at all.

Did it work with previous ii.x version?
If you  have iTunes 11 turn on the Sidebar. Go to iTunes>View and click on Show Sidebar. You can also do a Crtl+S to show the sidebar. The sidebar is where Devices appears. and Control+B to show the Menu bar
Did you do everything here:
iOS: Device not recognized in iTunes for Windows
Including
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
New cable and different USB port?
Runs this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
Try on another computer to help determine if computer or iPod problem

Similar Messages

  • My Ipod Classic 160 GB will charge but is not recognized on my macbook or in itunes. Just began suddenly

    I purchased my Ipod Classic 160 GB about a year ago new and never had any issues until lately. I recently updated my itunes to the newest version and my Ipod seemed fine and didn't have any trouble. About a week later my Ipod was no longer recognized by Itunes or my Mac book. The catch is, that my Ipod is still able to charge but never shows any signs of connection besides the charging screen. I have no clue where to begin.
    Any help would be awesome! Thanks

    Have you updated your iPod and iTunes sofware?
    most cases, iTunes can play these high quality songs, which is meant for newer mobile devices like  iPhones, iPod Touch, nano and iPad, which the older iPod cant play, but only playable with iPod classic sofware version 2.0.4
    most likely it is an incompatible song format, read this Apple support article.
    http://support.apple.com/kb/HT1334?viewlocale=en_USet
    If  your iPod software is version 1.1.2, then you have to use lower quality format.
    Can you select the problematic song, and Advance -> create iPod version

  • Ipod touch won't charge, reboot, or be recognized by computer or itunes.

    Holding the start and back buttons simultaneously for up to one minute does nothing.  It seems to not be accepting a charge from the computer or the wall charger.  It has not gotten wet.  Do these eventually just die?

    If you're out of warranty, see what your options are in this article: http://www.apple.com/support/ipod/service/faq/
    Out-of-Warranty Service: If your iPod requires service for any other hardware failure that is determined by Apple to be repairable, Apple will service your iPod for the Out-of-Warranty Repair Service fee.
    If you want to set up your iPod for the Out-of-warranty service, we recommend that you take your iPod to a local Apple Retail Store. Alternatively, you can contact Apple Technical Support.
    Click here for pricing.

  • Ipod will charge, but is not found

    Hello, I have had my Ipod Mini since march of this year(2005) and it has been working great up until about a few months ago. My Ipod will charge but is not recognized on the computer, and I have tried it in every one of my USB 2.0 slots(10 of them).
    When it is recognized sometimes it will update the songs onto my Ipod and then it will just disappear from my computer, like its not connected, but it will still charge. What I want is for when I open "My Computer" it will show that a Ipod is connected and I can open if from there. If anyone has any suggestions, they would be welcomed. And yes, I have tried every one of the support things on the site and in my Ipod booklet.

    Ive restarted my computer many times and its still the same, it only works about 15% fo the time, and when it does rihgt when it finishes updating it will act like its not there anymore.

  • My ipod touch is fully charged but will not turn on have tried soft reset and pluging into itunes but it does not even register it is plugged in help??

    my ipod touch is fully charged but will not turn on have tried soft reset and pluging into itunes but it does not even register it is plugged in help??

    See Here  >  Device Not Recognised  http://support.apple.com/kb/TS1538

  • When I connect my ipod to 2 different Mac computers, it will charge but is not showing up in itunes for sync. What happened?

    When I connect my ipod to 2 different Mac computers, it will charge but is not showing up in itunes for sync. What happened?

    What have you tried so far in terms of troubleshooting this issue?  Are you plugging the iPod into a high powered USB 2.0 port on the back of your Mac? Have you tried a different USB cable?
    What happens if you try to reset the device with it still connected to the Mac?
    How to reset iPod
    Has this iPod ever worked on this Mac or is this the first time you have time you have tried connecting it?
    Have you carefully worked through each and every single suggestion in this Apple support document?
    iPod not recognized in iTunes and Mac desktop
    B-rock

  • Ipod was disabelled and needed connecting to itunes, with countless attempts  nothing happend therefore performed as reset, now instead of turning on and off,  ipod displays connect to itunes but is not recognised by computer nor will it connect to itunes

    ipod was disabelled and needed connecting to itunes, with countless attempts  nothing happend therefore performed as reset, now instead of turning on and off,  ipod displays connect to itunes but is not recognised by computer nor will it connect to itunes, try enabelling for restore but only connec to itunes is shown consistently

    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen
    If recovery mode does not work try DFU mode.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

  • My ipod touch version 4.2.1 is not recognized by Windows 7 after upgrading i tunes to 11.2. I have gone through all the trouble shooting suggestions twice

    My ipod touch version 4.2.1 is not recognized by Windows 7 after upgrading i tunes to 11.2. I have gone through all the trouble shooting suggestions twice

    Did it work with previous ii.x version?
    If you  have iTunes 11 turn on the Sidebar. Go to iTunes>View and click on Show Sidebar. You can also do a Crtl+S to show the sidebar. The sidebar is where Devices appears. and Control+B to show the Menu bar
    Did you do everything here:
    iOS: Device not recognized in iTunes for Windows
    Including
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    New cable and different USB port?
    Runs this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    Try on another computer to help determine if computer or iPod problem

  • When I plug my ipod touch into my PC, it is not recognized in file explorer

    When I plug my ipod touch into my pc, it is not recognized in file explorer

    It does (should) show up in Explorer on a PC. On a Mac it does not show up in Finder
    Try:
    iOS: Unable to import photos to computer
    Have you installed any camera or scanning software?
    If you have a camera, does the camera show when you connect to computer?

  • My ipod will charge but does not show in itunes or windows

    I tried to use my ipod as a disk to transfer my itunes library from my desktop to my notebook (both Dell), now my ipod charges, but does not show up in itunes or on either of my computers. I have used the advice of going to control panel and unchecking the box under power management but that didn't work, CAN SOMEONE PLEASE PLLLEEEEAAAASSSSSSSEEEEEEE HELP ME?
    I have windows xp on one and vista on the other, if that helps.

    This worked for me, don't know if it will for you. Have ITunes open. While IPod is connected to computer press(at the same time) the menu and center buttons until your screen goes black and shows the apple icon then immediately press the forward button. Your IPod should show up. It won't hurt to try it, even if it doesn't work. Hope this is of some help to you.

  • IPod nano charges but is not recognized

    Good morning.
    Im writing this topic, because I saw all the topics about this same problem, and none of them solved mine. I hope you can help me on this, so here is the thing:
    When I connect my iPod to the 2.0 usb port, the ipod lights its screen, charges, but neither windows or iTunes recognizes it.
    Ive tried going to:
    1. Going to control painel
    2. Double clicking System icon
    3. Hardware < Manager of Dispositives < Universal USB thing
    When Im there, I disabled the options at USB ROOT HUB on "Computer can turn it of dispositive to minimize waste of energy", as I have read on the other article to do, but it didnt help.
    Here is something that Ive tried everything to understand, but I cant: In the same place (Hardware - System - Control Painel), when the iPod is connected at the computer, my ipod appears on that list! But it comes with an Exclamation Point right next to its name, and it says that it needs an software to make it useful.
    The real message is:
    The drivers for this dispositive are not installed.(Code 28)
    To reinstall the drivers of this dispositive, click at 'Reinstall Driver'.
    Doesnt iTunes install it or whatever? What can I do to get my iPod recognized by the iTunes and computer, and then sync my songs?
    Please, I need someone's help!
    Thanks a lot,
    Andre.
    Ps:. 1. iPod nano, 1st generation, 2gb.
    2. Windows XP.
    iPod nano 1st generation 2gb   Windows XP  

    Did you ever find a solution for your problem. It is exactly the same as mine and I'm so frustrated with all the problems after spending so much money for something that is supposed to be fun.
    I too have done everything suggested and still no answer. My computer will not install the driver or recognize the ipod exists.
    If you did find an answer, please email me with anything you think may help.
    Thanks

  • Ipod touch shows the apple but does not respond to anyting any tips

    I can not do anything with it. My version is the 8 G

    Try here:
    iPhone and iPod touch: Frozen and unresponsive
    There is not8 G iPod touch.  I supect you have an 8 GB model.  Is it a 1G, 2G or 4G?

  • IPod touch g4 iOS 6.1.3 not recognizing external gps devices.

    Having intermittent luck in getting my iTouch g4 with iOS 6.1.3 to acknowledge my external GPS devices.  I have tried the TomTom, Dual cradle and Dual Bluetooth devices and each has the same issue.  It works great some times and other times will not recognize that the device is connected, but other aspects of the device (charging, speakers, etc) work fine so physical connection is there.  In some cases, @ 50%, resetting the iPod will work, other times I can reset 5x and still not work. Tried disabling wifi , going into airplane mode etc.... No real pattern as to what gets it going.  Seems to be a memory issue in OS.  My brother in law has experienced the same kind of issues.
    Any idea what is going on or how to report a bug to apple?
    Thanks, lost / going nowhere (as far as my iPod is considered)

    TS1702 magellan External gps not...: Apple Support Communities
    after updating to iOS 6 gps signals are...: Apple Support Communities

  • New iPod touch 5th generation 32 Gb is not recognized by my computer

    I just got a new iPod 5th generation, and I want to get all the music from my previous iPod that I had stored on iTunes on my computer. However, my copmuter doesn't recognize my iPod. I tried restarting the iPod and then plugging it in, but nothing comes up under devices.

    Here
    iOS: Device not recognized in iTunes for Windows
    or
    iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X
    Do you have iTunes version 11 installed on the iPod?
    If you  have iTunes 11 turn on the Sidebar.  Go to iTunes>View and click on Show Sidebar. You can also do a Crtl+S to show the sidebar.
    Does the iPod charge?

  • Ipod Touch is fully charged but will not run on battery. Runs plugged in.

    When I unplug - it dies. Just upgraded the OS

    Hi,
    The whole battery may need to be replaced. Take it to your Apple Store and see what they have to say.
    xxmitchxx90

Maybe you are looking for

  • Why can't I use windows touchpack on IQ772.UK?

    I am currently running Windows7 RC on my touchsmart Iq772.uk and recently installed windows touchpack but when i try to run it it tells me i dont have the hardware on my computer,i downloaded the nextwindow driver even though it says its only compata

  • How Can I Make A Large Photo with Product Detail for My Thumbnails in Dreamweaver

    Hello All: New to Dreamweaver, so my code knowledge does not exist yet. Have Mercy!!!! Anyway , I am making a typical product page. I prefer that when people click the thumbnail product photo to not have to click into another brower. Nowadays you are

  • Problem with V.25 transaction

    Hi All I have problem with V.25 transaction. This transaction contains some variants, and currently my variant dispalying 10 feilds. Now i want to add 2 more feilds to the report. So i went to transaction VOKF and added the two feilds to my variant.

  • Apps dissapear and return as grey boxes?!

    So I went into the app store (from my iphone 3gs) last night and my user id/pw box popped up right away (it has never done this without me trying to download something) so I hit cancel and it popped up again a few seconds later so I entered my passwo

  • Behavior of afterRowUpdate method

    In method afterRowUpdate of ViewObjectImpl class you iterate over a enumeration of querycollections and if the parameter "joinFKChanged" is true and the variable "firstTime" is also true the method 'updateReferenceEntities' is called. My question is