My iPod touch 5 don't tell me when I get a new message or any kind of notification the screen stays black and you can't even hear the sound . I have already tryed going to settings notification to turn every apps on . HELP me please !
I have tried going in my notification and turning my apps on .
Perform a Reset ( No Data will be Lost )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...
Similar Messages
-
Hello. I dropped my ipad, first gen, from my chair to the floor. The screen went black and I can't start it again. I have tried to hold both buttons down at the same time, but nothing happens. Any help?
You will probably have to contact Apple for repair but before you do try this:
Turn your iPad upside down on your lap and give it a hard smack on the back. -
my ipod 4g was working fine until i locked the screen but when i tried to turn it back on the screen stays black and its been 3 days. Does anyone know how i could fix this?
- Charge the iPod for half an hour. Then reset the iPod:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- if still not working, connect to your computer. If iTunes sees the iPod, restore the iPod.
- If still problem, place the iPod in recovery mode and then try to restore the iPod. For recovery mod see:
iPhone and iPod touch: Unable to update or restore -
This happened to me when I received a call. My phone started vibrating when it received the incoming call but the screen was black and kept vibrating like as if the call was still coming in, even though my friend hung up. It kept going and going, so I tried holding down the lock button to turn it off but screen was still black/turned off. Hitting home did nothing. My friend said to try holding down the lock button and home button together to reset it. I tried this and yet nothing happened. I am waiting for the battery to drain out and give it a try.
To reset, you have to press both the home and sleep/wake buttons until the Apple logo appears - takes 10-15 seconds.
-
While I was trying out the voice over option on my phone I somehow put it in a mode to where the screen stays black and it will only talk to me. How do I get it back to normal?
"If VoiceOver is on and the screen is black, but you can still use the device by pressing volume up and volume down, you may have screen curtain on. Try triple-tapping using three fingers on the device display to turn off screen curtain. Or connect the device to iTunes"
http://support.apple.com/kb/HT3577?viewlocale=en_US&locale=en_US -
I have an ipod A1285, I have 2,858 songs on it. The screen went black and i can barely see it now. Can apple fix this for me? Or can i get my songs off this ipod and put on a new one?
Hey BlueEyedDude,
Thanks for the question. I’m sorry to hear about your iPod nano! If you believe you have isolated the issue completely to hardware, you can learn more about servicing your device at the following link:
Apple - Support - Service Answer Center
http://www.apple.com/support/ipod/service/faq/
If you’d like to attempt some more troubleshooting tips, see this link:
iPod nano - 4th and 5th generation - Apple Support
https://www.apple.com/support/ipodnano/4th_5th_generation/
If you do decide to service your device, you’ll want to make sure all of the music and information is backed up. If you regularly sync your device with a computer, this music should be on the computer. If not, you can learn about what purchases you can transfer from the iPod to a computer:
iTunes Store: Transfer purchases from your iOS device or iPod to a computer
http://support.apple.com/kb/HT1848
iTunes: Transferring media from your iPhone, iPad, iPod touch, or iPod
http://support.apple.com/kb/HT1209
Thanks,
Matt M. -
My iPhone 4s screen went black. I can hear the phone receiving messages though. I tried to restore through itunes. I failed because "find my iPhone" app is on, I cannot switch it on since the screen is black and I can't see
Instead of trying to restore through iTunes, use the Find My iPhone to your advantage.
Either go to www.icloud.com and perform a remote wipe of the device via FMiP, or download the FMiP app to another iOS device and do it from there.
A remote wipe will also restore the device back to factory settings. -
my iphone 5's screen blacks out every now and then. the phone is turned on but the screen is black and i can receive calls. what is wrong with my phone?
I have to believe this has something to do with iOS 7 issues. I have taken my screen blacked out 5s twice to the Genius Bar and the found a bunch of system apps had crashed. So if this is the case, is iOS7 the problem?
-
I was in the middle of using my iPhone 4 running on the latest iOS before iOS 6 and the screen went black but you can see it is still on because the color of the screen is blueish blackish like when your phone is turning off. Any suggestions?
Reset the device by pressing and holding the home and power buttons for 15-20 seconds until the white Apple logo appears.
-
I'm trying to install a samsung series 7 750 monitor for use with my mini mac. When I plug the computer to the monitor I get a blank screen, no picture. When not plugged in to the computer the screen is black and a square displAys that says analog, HDMI 1, HDMI 2. Any ideas?
Hey there saraszeg,
It sounds like you are trying to use an external monitor with your Mac Mini but cannot get more than a gray screen. You can use the following steps to help troubleshoot the Mac side of things here:
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/HT1573
Remove all display cable extenders, KVM switches, or other like devices and retest to determine if the issue is resolved.
Try unplugging the video adapter or cable and then plug it back in.
If more than one video adapter is in use (or "daisy-chained"), troubleshoot by using only one adapter.
Example: A mini DisplayPort to DVI adapter connected to a DVI to HDMI adapter is an unsupported configuration because there is a series of adapters in use.
If available, try using a different display and or adapter (or use a different connector by using DVI instead of VGA, for instance).
Reset the system
You can reset the Mac's parameter RAM and SMC.
Reset the resolution
Start by resetting the Mac's parameter RAM. If the display does not come up, was previously set to an unsupported resolution, and still results in no video:
Start up in Safe Mode.
From the Apple () menu, choose System Preferences.
Choose Displays from the View menu to open the preferences pane.
Select any resolution and refresh rate that your display supports.
Restart your computer.
Thank you for using Apple Support Communities.
Take care,
Sterling -
i locked my ipod before i went to bed a few nights ago and in the morning when i woke up i tried to turn it on but the screen stayed black so i put it on the charger to see if it was dead or not but it wasnt. i left it on the charger for an hour or two thinking it will turn on but nothing happened and i just tired to connect to itunes and nothing happened.
Hi,
Try a Reset of the Phone... You will Not Lose Any Data...
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
The Apple logo will Appear and then Disappear...
Usually takes about 10 - 15 Seconds...
Turn the Phone On...
If that does not help... See Here:
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414 -
I down loaded an App when trying to down load a song my screan when white and now I cant vevn shout it down
Try:
- iOS: Not responding or does not turn on
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order. -
My 4th gen iPod Touch has had a blank screen for about 3-4 weeks now, it will not turn on, sync, or charge. iTunes recognizes its plugged up, but i cant reset it because it says its passcode protected, but i cant enter passcode due to screen not lighting up or working. How do i fix this?
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings -
I was meeting around with lock my iPhone and I was prancing my friends when i locked my phone now it's locked and the screen is now pitch black it can receive calls nut I can't see a thing
There is nothing that you can do to get rid of the balance on your own. Contact iTunes Store Support and seek their assistance. I believe that they can reset your balance for you.
https://expresslane.apple.com/Issues.action -
However, I took some screenshots and when I went to upload the pictures to my Mac, the screenshots uploaded. So I believe my phone still is working but the screen is just not turning on. I tried holding down the home and top button for ten seconds, even longer, but nothing occurred. I am hoping to find a possible solution so I do not have to buy a new phone. Thank you!
The backlight burned out from getting it wet. You will have to replace the screen at a 3rd party shop, buy a screen and replace it yourself, or make a Genius Bar appointment at your nearest Apple Store and do an out-of-warranty replacement for $199 USD.
Maybe you are looking for
-
IPod is recognized by iTunes but songs won't show up on device
I bought a brand new 32gb ipod touch 5th generation last weekend. I put about 8gb of music onto it. the music displayed under the "on my device" section of my ipod in itunes however when i disconnected my ipod the only songs on it were ones that were
-
RGB Color management between Illustrator and Photoshop
Hi, I have a color management issue when exporting JPGs from Illustrator and opening them in Photoshop: In Illustrator (file is in RGB mode), I have a logo which has the color RGB 0/0/153 and I export a JPG. When I open the file in Photoshop, the col
-
Hi Experts . Could any one please let me know if the material in QA is indeed valuated at normal value and added to complete materials value and that blocked stock is not added to complete inventory value !!!1 Your comments and advise will be appreci
-
Calling BUS3007 from VB6 application
Hi, i´m triing to call ARAccount.GetBalancedItems from an VB Application. But the Call always ends with "Named Parameter not found!" Sample Code: Set mObj_Buch = mobj_Bapi.GetSAPObject("BUS3007") Set mobj_LineItem = mobj_Bapi.dimas(mObj_Buch, "GetBal
-
1142 Access Point - DHCP trouble
Hi there, I am setting up an autonomous 1142 Access Point. The intended goal is to get it accessible though 2 SSIDs: Private: VLAN3 (our internal data VLAN) Guest: VLAN98 (our DMZ/Segregated VLAN) At present, our VLAN3/internal users get DHCP address