My ipod touch 5th generation will not turn on.
I purchased this Ipod Touch and recieved it around Christmas time. I have had it for around 3 months and everything was working fine. The first time this happened I purchased another lightning cord, which then again happened. So over the course of 3 months I have gone through 3 cords. The one that came with it and two I pruchased from Walmart. When I plug my ipod into an IHome, Computer, or lightning cord to wall adapter it doesn't charge. The screen is black and when I click the home button the battery shows up with the red line and lightning bolt. I left my ipod on the charger overnight and it still will not charge. I also tried the home and sleep buttons without success. I did not save my paperwork like an idiot but I still have the box it came in when I purchased it. Please help,
Not Charge
- See:
iPod touch: Hardware troubleshooting
- Try another cable
- Try another charging source
- Inspect the dock connector for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genus Bar of an Apple store.
Apple Retail Store - Genius Bar
The cable is covered by the same 1-year warranty that that covers the iPod itself. To check your coverage enter the iPod's SN here:
Apple - Support - Check Your Service and Support Coverage
Similar Messages
-
My ipod touch 5th generation will not turn on and the home button doesn't work. what do i do?
Hello my name is Leslie and i would like to ask you guys a question on how to fix my ipod or what is wrong with it. My ipod touch 5th generation will not turn on and the home button doesn't work. what can i do to fix it ?
Has the home button worked in the past, or is this been something that hasn't worked for some time? The only way to reset the device is with the sleep/wake (power) and home buttons together. Without it, you would have to wait until the battery dies and then plug it in to try and reset it. The Home button is used for several user troubleshooting steps. Without it, you cannot perform a reset, put the device into recovery mode, or place it in DFU mode. You need to get the home button repaired.
-
What do you do when your iPod touch 5th generation will not turn on, and it isn't in recovery mode?
Today, my iPod touch 5th gen wasn't turning on, but during school earlier today it was working just fine. When I got on the bus, it wouldn't turn on? I got home and I plugged it into the charger and tried to see if it would turn on that way, nope. Also, there would be no way for it to be in recovery mode, because of the fact that the home button is pushed in and wont work. I've had my iPod for 2 years, is it just old and decided to give out?
See this previous discussion
Turn on without Home/Power Button -
Ipod Touch 5th Generation will not turn on, restore, or show up in itunes unless in DFU mode.
So a friend gave me his Ipod Touch 5th gen because he couldn't fix it himself and he bought a new one, and while I'm stoked to have a near brand-new Ipod touch, it's also frustrating me to the point I'm ready to give up on it aswell and pass it down the line. I'm not sure what he did to it, he says it just stopped working but you never know.
Anyways, the problem is that it simply does not turn on regardless of what I do to it. When I plug it into the computer, it gets warm; usually a sign it's charging fine. However, it doesn't show up on Itunes. I read some forum posts and searched around other places aswell, and tried putting it into DFU/Recovery(not sure which is which anymore, it's the one where you hold down the power button for 3 seconds, then home+power for 10, then home button for 20). It showed up on Itunes, and said it needed to restore. I downloaded the 1.2gb update it needed, but then it hung at the "Waiting for Ipod" progress bar. As it does this, I get maybe 3-5 Windows 'bing' sounds of a connecting/disconnecting device, ending on a disconnect sound. Itunes eventually times out the restore with an error code 4005, which I read means the Ipod has been disconnected in the middle.
After this, it doesn't show up on Itunes and I have to repeat the process to get it to show up again. I tried it a third time just now and it's still doing the same thing.
Any ideas? Really at the end of the line on ideas I think.
Please and thanks,
-Cody
P.S. I don't know if it matters but the warmth is coming from the top/camera end fo the Ipod. Not sure where the battery is versus the CPU, but maybe that'll help the diagnosis.
P.S.S. Also, when it shows up in Itunes in recovery mode, it doesn't show a serial number, so I don't think an Apple store would even work on it without a serial #.Check USB connections
Related errors: 13, 14, 1600-1629, 1643-1650, 2000-2009, 4000, 4005, 4013, 4014, 4016, “invalid response,” and being prompted to restore again after a restore completes.
If there’s an issue with the USB port, cable, dock, or hub, or if the device becomes disconnected during restore, try troubleshooting the USB connection, then troubleshooting your security software.
To narrow down the issue, you can also change up your hardware:
Use another USB cable.
Plug your cable into a different USB port on your computer.
Try a different dock connector (or no dock).
Add (or remove) a USB hub between your device and computer.
Connect your computer directly to your Internet source, with no routers, hubs, or switches.
If you checked your connections and are still seeing the error message, check for hardware issues.
Check for hardware issues
Related errors: 1, 3, 10-47, 1002, 1011, 1012, 1014, 1000-1020, 1669.
Try to restore your iOS device two more times while connected with a cable, computer, and network you know are good. Also, confirm your security software and settings are allowing communication between your device and update servers. If you still see the error message when you update or restore, contact Apple support.
Try on another computer.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
The SN may not show up because of a hardware problem and does not mean Apple will not help -
My ipod tocuh 5th generation battery died so i went to charge it and i would not charge so i did some reasearch and tried many steps such as hold down the buttons for a long time but nothing happened then i tried to restore it and it wont let it, it just comes up with error 1602 and ims cared i dont know what to do please HELP.
Error 1604
This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode,put it into Recovery Mode.
Restore and wait for the error.
When prompted, click OK.
Close and reopen iTunes while the device remains connected.
The device should now be recognized in Recovery Mode again.
Try to restore again.
If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
Error 1600, 1601, 1602
Follow the steps listed above for Error 1604. This error may also be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software. -
I recently bought my new ipod touch 5th gen, and was playing it (browsing on an app) until it randomly shut down without any warning or anything. I thought maybe the battery was low, but I was sure that my battery life was half way and also that it did not give me the "20% low battery" warning. I plugged in my ipod into my recharger just to be sure, but it would not recharge, the screen did not start back up. It stayed pitch black. I tried plugging it into my laptop, still the same thing happened. Furthermore, my laptop did not even recongise it at all. I'm not sure what is wrong with it. I even left my ipod plugged in for some time now, and still it appears to have the same pitch black screen.
Please help, thank you. I appreciate it!Try charging the ipod touch on a wall charger and make sure the outlet is working. And leave it there for 10 minutes.
Or try holding the power and home until apple logo appears. -
my ipod touch 5th generation is not turning on and i cant restart it because the home button does not work and it will not connect to anything
Get it fixed then, make an appointment with the Apple genius bar.
-
My ipod touch 5th generation will not charge when connected to charging cord. I have tried two different cords with same result. It will charge for a second then show not charging. Any suggestions?
- See:
iPod touch: Hardware troubleshooting
- Try another cable
- Try another charging source
- Inspect the dock connector for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genus Bar of an Apple store.
Apple Retail Store - Genius Bar -
Please Help!!! My iPod Touch 5th gen will not turn on!!! If anyone can help, please do so!!!
I connected an iPod shuffle charger to the earphone slot of my iPod touch 5th generation and now it will not turn on at all!!! Can anyone please help me with this problem?
The Basic Troubleshooting Steps are:
Restart... Reset... Restore from Backup... Restore as New...
Restart / Reset
http://support.apple.com/kb/ht1430
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414
ChrisAllen109 wrote:
I connected an iPod shuffle charger to the earphone slot of my iPod touch 5th generation and now it will not turn on ...
But it looks like a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is required...
Be sure to make an appointment first... -
Please Help Me. iPod Touch 5th generation will not download music from itunes
My son has an IPod touch 5th generation that he got for Christmas (3 months old :(! All of a sudden if he is on iTunes and buys a song it won't download. It will say its already been purchased but its not in downloads. I have soft reset and now finally did the erase all data and settings. When it started up and i signed into icloud everything started downloading but the music. If I go into the iTunes app and hit purchased music I can see all the music but when I go to hit specific artists it sits and loads (circle is circling) and won't show me the individual song titles. I'm sick to my stomach that the iPod is not fixable because I can't afford to buy my son a new one and I haven't finished paying this one off. Can anyone help me please? I can add music from iTunes on my computer directly to the iPod when plugged in. So I am assuming this means something is wrong with iPod. Any help will be appreciated. Thank you.
First, don't obsess over it. If, in fact, there is something wrong with the iPod, it's still in warranty. Now, I don't know for certain what will fix this for you but here are some suggestions, beginning with one that's quick and easy.
First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here. -
Ipod touch 5th gen will not turn on- home button stopped working months ago
Hi,
So I have a ipod touch 5th gen and it suddenly turned off and will not turn on.
Okay, I just want to say first I know the answer would be to hold the top button and the home button at the same time until it turns on.
The thing is, my centre home button stopped workings months ago so I was using the assistive touch.
What happened:
I was using my ipod and the battery was almost full. When I tried to use it 10 minutes later it was turned off and I can't turn it on. I tried plugging it on my computer and it will not recognize it.I also tried holding only the power button on top for a while but nothing happened.
Any ideas?Try:
- iOS: Not responding or does not turn on
Ignore the reset and when it says place the iPod in recovery mode
Place the iPod in recovery mode using one of these programs:
For PC
RecBoot: Easy Way to Put iPhone into Recovery Mode
or
http://joshuabailey1997.wordpress.com/2010/09/02/recboot-v1-3/
If necessary:
Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
and
RecBoot tip
RecBoot may have problems on 64X windows, then try:
Tenorshare ReiBoot – Enter & Exit iPhone, iPad, iPod Recovery Mode with a Single Click
For MAC or PC
The Firmware Umbrella - TinyUmbrella
Installs blootware on PC too
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
my ipod touch 5th gen was working fine then it just turned off and havent been able to turn back on at all since. the screen is completely blank and the charge light dosnt even turn on
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
IPod touch 2nd generation will not turn on at all... Help, please!
Our iPod will not turn on at all. Any suggestions on what we should try?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
My ipod touch 4th generation will not turn on
I was using it for like 5 minutes and I put it away in the side compartment of my backpack and when I went to use it like two hours later it would not turn on, the low battery image did come up and even when I plugged it into my ipod dock it still did not come on, now I have it plugged into my computer and still nothing. I bought it when it first came out about october or november I think. I guess my question is will the replace it because I didn't do anything to cause this to happen.
Well there is one thing you can try... hold down the home button and lock/sleep button at the same time and don't forget to hold it. It should turn on. (By the way what you are doing is a restart, if you were on your iPod Touch on the home screen and you did thins it would reboot, and that is exactly why you are doing this)
-
Im having issues! Its terrible. I press and hold the buttons.....it wont turn on. i need help because i dont want it to crash and lose all of my information on this ipod. I NEED HELP! WHATEVER ADVICE YOU HAVE WILL BE HELPFUL!
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
Maybe you are looking for
-
Hello I wonder if anyone would be able to help. I have a JVC GY-HM100. I have footage from a ongoing project saved on SDHC cards. I want to save money by reusing the cards while i carry on working on the same project. I wondered if I could save the
-
Acrobat won't play with Windows 7 nicely
I am running Acrobat 9 Pro on Windows 7 32-bit. I save a pdf then close the pdf. I do not close the program, just the pdf. I go to windows explorer and attempt to move the folder that contains the pdf I just closed (as well as a few other files).
-
Adobe 7.1.0 communicating with Microsoft outlook 2007
I am running Adobe Professional 7.1.0 and OS Windows 7. when I send a adobe file for review/approval, outlook does not acknowledge in it's "send/receive" function that the file was sent. When I first change to Windows 7, this was not a problem. Wh
-
Control to Stop Users Changing their Own Employee Master Data
Hi all. I'm carrying out a security review of users on a SAP HR implementation as part of this we are looking at users that can change bank details, basic pay etc. I was wondering if there is a control in place on SAP that would stop a user with acce
-
My infoprovider contains the characteristics company code (0COMP_CODE) and consolididation company(0COMPANY). They are identical (I didn't invent this, but I have to deal with it. It actually may turn out to be a plus. If...). (We also have profit c