My ipod touch cannot be reconised on itunes a box apears which says this ipod cannot be used because the softwareis not installed .unistall itunes and reinstall this i do to no avail
my ipod touch cannot be rceconised on itunes this come up the ipod touch cannot be reconised besause the software is not installed use the installer to uninstall itunes ane reinstall this i have done still not working
This might help restart it http://support.apple.com/kb/TS1567
Similar Messages
-
what i need to do to fix this problem? Do you have firmware to re-install? please help or advice
Did you already check this article?
iOS: Wi-Fi or Bluetooth settings grayed out or dim
Did you try to set up your iPod as new device?
How to back up your data and set up as a new device -
I updated itunes today and now i have the following error:
MSVCR80.dll not installed
and itunes will not start at all
I uninstalled and reinstalled itunes, but keep getting the same message
Plus the message "Error 7 (windows error 126)"
can anyone help with this??Troubleshooting issues with iTunes for Windows updates - MSVCR80
-
HI I CANNOTSYNC MY IPHONE TO MY COMPUTER. ITUNES ASKS ME TO AUTHORIZE COMPUTER.
ONCE THIS IS DONE THE NEXT MESSAGE IS COMPUTER IS AUTHORIZED.SYNC STARTS AND THE NEXT MESSAGE IS THAT
THE COMPUTER IS ALREADY AUTHORIZED FOR MAX OF 5. THIS COMPUTER HAS IN THE PASS BEEN REPAIRED WITH WINDOWS BEING
REINSTALLED SO ITUNES WAS ALSO REINSTALLED .WHAT CAN I DO TO RESTORE MY BACKUP FOR MY IPHONE 5S THAT I JUST PURCHASEDHey Mohamed Akhtar,
Thanks for the question. To troubleshoot this issue, you may want to try deauthorizing all computers:
iTunes Store: About authorization and deauthorization
http://support.apple.com/kb/HT1420
To deauthorize all computers associated with your Apple ID
If you need to authorize your new computer and are unable due to already having five authorized computers, you can deauthorize all computers by doing the following:
1. Click iTunes Store on the left side of iTunes.
2. If you're not signed in to the store, click the Account button, then enter your account name and password.
3. Click the Account button again (your Apple ID appears on the button), enter your password, and then click View Account.
4. In the Account Information window, click Deauthorize All.
Note: You may only use this feature once per year. The Deauthorize All button will not appear if you have fewer than two authorized computers. If you need assistance on using this feature, please contact iTunes Store support via email (http://www.apple.com/support/itunes/store/).
If you continue to have issues, you may want to see the steps in this article:
iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
http://support.apple.com/kb/TS1389
Thanks,
Matt M. -
Please help
You may be getting that error message if the setting 'Copy files to iTunes music folder when adding to library' is not turned on (in Preferences>Advanced>General).
To sort all your songs out in one batch, my suggestion would be to remove all your songs from your iTunes library and re-import them all. However, as someone who also has a 5,000-song collection, I wouldn't want any of your songs to be deleted, so either do a backup or write-protect your iTunes music folder. -
how do i get my ipod to turn on after i tried everything i cant even get it to charge
Try:
- iOS: Not responding or does not turn on
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order. -
hiii
I updated my new ipad to iOS6 and when I try to open itunes a box appear which says " Cannot connect to itunes store"?????????
please give me some solution.
And i also try to bluetooth to connect to another apple device, but no pairing or connection is made???????????hiii
I updated my new ipad to iOS6 and when I try to open itunes a box appear which says " Cannot connect to itunes store"?????????
please give me some solution.
And i also try to bluetooth to connect to another apple device, but no pairing or connection is made??????????? -
"This iPhone cannot be used because the required software is not installed"
Greetings,
I have a problem with my newly purchased iPhone 3G - iTunes will not recognize it, stating that "This iPhone cannot be used because the required software is not installed". Uninstall and reinstall iTunes, it says. I've done that several times, following the instructions for removal here: http://docs.info.apple.com/article.html?artnum=93698
Not working. The iPhone is recognized in Windows, and both the Apple Mobile Device and iPod services are running. I'm running out of options here - I managed to activate the iPhone on another computer, but I need to sync it with my own computer to make it usable.
I am running 32-bit Vista SP1 (fully updated) on a Travelmate 8200 laptop. iTunes version is the latest, obtained from Apple.
Any help would be greatly appreciated, my hair is turning gray over this.If it were me, I'd make sure to uninstall all 4 of those services mentioned in that link you provided. Then make sure you've downloaded the iTunes package from this link http://www.apple.com/itunes/download/
Make sure you install, and keep installed, everything in that package. In other words don't uninstall anything that the package installs. I don't know this for a fact, but I'm pretty sure that at the very least your system will need both iTunes (most recent version) and QuickTime in order for the new 3G phone to function properly. If you download from the link provided above, you should get the latest version of iTunes and QuickTime. Hope this helps.
Wooops, . If your location requires you to download from another link, then by all means go to it. I just noticed that you're from Sweeden.
Message was edited by: QuickDraw -
Tried to use the spot healing brush and clone stamp and got error messages "cannot use because the scratch disks are full." What does this mean? PSE9
Elements uses drive space to make its calculations, like someone writing down measurements on a scrap of paper. How much free space is there on your hard drive?
-
When pugging in my ipod touch on itunes, it says this ipod cannot be used because the apple mobile device service is not started. What can be done to remedy this? Up till yesterday I have not had this problem
See:
iPhone, iPad, iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows -
I have a new iPod touch and when I connect it to my pc and itunes, a window says "this ipod cannot be used because the Apple Mobile Device Service is not started."
This might help restart it http://support.apple.com/kb/TS1567
-
i had just gotten a new ipod touch and i had completed all of the mandatory start-up settings and when i plugged it into my computer to sync my music from itunes, a pop up came up and it said, This ipod cannot be used because the apple mobile device service is not started...what do i do to sync it my itouch?
See Here...
AMDS
http://support.apple.com/kb/TS1567 -
ipod touch for Christmas, but cannot get started: after installing itunes, when connecting to my laptop I get no instruactions, just the error message "This iPod cannot be used because the Aplle Mobile Device service is not started". Any suggestions???
Jennifer...
Follow the instructions here > iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows -
I plugged my 4th generation iPod touch into my computer and when iTunes popped up, there was a notice that read, "The iPod cannot be used because the Apple Mobile Device is not started". What does this mean and what do I do?
Type "Apple Mobile Device Service" into the search bar at the top of the page by Support and read the help article.
-
i can not get my ipod to get out of the connect to itunes page , and when i plug it in it says itunes mobile device system is not setup
From what I know from troubleshooting all sorts of screwed-up PC devices, you should try the following steps (I have assumed you didn't try any of them, so plz don't take offence for some "basics"):
1) Updating the iTunes on your PC, or if it's already the latest, see if you can find the individual install package of "Apple Mobile Device Support" by using Window's Search (the package should be "AppleMobileDeviceSupport.msi") and reinstall it (Uninstall the existed one first). If you can't find the individual package, I think you may find a downloadable one online, or if you want to simply the process, just reinstall the whole iTunes.
2) If problem remains, check if there's any "application/service monitoring function" on your anti-virus/spyware program, and find if "Apple Mobile Device Support" is on its "blocked list", remove this entry when you find it.
3) Check if there's any "Registry" clean-up software/function in a software, or whether you've altered any apple-related or unknown registry entries. If it's a yes, see if you can find the most recent Registry backup before the iPod connection problem occured. In the case you do not have any backup (Make sure! Almost every Registry clean-up software would back-up Registry before any cleaning process. You can find them in this software's directory), simply use the "system restore" program of Windows to restore your computer to the latest point when iPod's connection with PC was still functioning.
Since we can't find any problems with "Apple Moblie Device Support" from above steps, let's refocus to the hardware part:
4) Restore the "setting part" to default on you iPod, if you don't want to wipe clean your setting now, try below steps first.
1) Plug in your iPod to other USB port, if it doesn't work, try plug in other devices to check if there's any problem with your USB ports or USB's drivers on PC. (If there is, try 'roll back' the USB driver's version by entering to its 'property' on right-clicked menu, if still doesn't work, maybe the USB ports are broken-down)
6) Go over the steps and check if you've tried everything. The latest choice I'd advise is to check if you can find another "USB cable" for iPod and plug-in so you'd know if the original is broken.
Well, that's about all I can think of. Good luck and post your questions if you need any clear-up.
Maybe you are looking for
-
ListerUsers methods in 10.3.1 requires implementation, but not in 10.3
Hello All, We have one security provider developed in 10.3 which is running fine. When we developed the same in 10.3.1, by selecting "Home> Security Realms> myrealm> Users and Groups" automatically tab "Users" appears . This shows a stack trace: Home
-
My iphone screen is cracked, i have iphone insurance (not with apple) and they want to fix my phone at their owe repair centre. Legally can i insist they get it repaired through Apple?
-
I have a fully functioning iPhone 4S in mint condition apart some water marks on screen (dropped in bath) everything works perfectly as it should. I wish to exchange and pay the difference for an iphone 5s. Is this possible from the apple store (uk)
-
Change of BP Type (CardType) Description
All I want to do is change the Description of BP Type 'Lead' to 'Contact' in the drop down on the BP Master Data screen. Is this possible and of so how do I accomplish this? The end result would be having 3 types of BPs in the drop down Customer,
-
Purchased the whole series of Battlestar Galactica and Lost years ago. Suddenly I can no longer view them on my Apple TV 3rd Generation. Other purchased show work fine but it appears these two no longer work. Already restarted my Apple TV several tim