My iPod Touch has been locked out for 22 million minutes, and will not let me restore it?
I hadn't used my iPod in at least a few weeks prior to turning it on and charging it. After I did, it gave me a notification that said, "Disabled for 22, 311, 091 minutes." So I looked into it and decided to restore my iPod using iTunes on my computer. However, after attempting to restore it, it told me that I would have to enter a passcode on it. I do not have any access to other computers, and it won't connect to the Internet to use Find My iPhone unless I used voice command to access FaceTime -- which only works when it is unlocked. I know the password, but I really don't want to wait for a month or so to access it. How do I fix this?
Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Forgot passcode or device disabled
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.
Similar Messages
-
My ipod touch is being read as just a simple camera and will not let me access it, how does one go about fixing this problem? My screen has recently cracked and i need to retrieve my music from it but cant do so when my computer is reading it as a camera and only showing me its pictures.
Here:
iOS: Device not recognized in iTunes for Windows
or
iOS: Device not recognized in iTunes for Mac OS X
Also try another computer. -
I forgot my ipod touch's passcode and it died. After a couple months i pulled it back up and it was locked out for 21 million minutes and i looked it up on the internet and couldnt fix it with anything. I then took it to geek squad and they couldnt even fix it. Dfu mode wont work, cant connect it to itunes, cant restore or recover it. Please help me.
Use Device Firmware Mode...
1. Turn off your ipod To do this, hold the home and sleep buttons for 10 seconds, ignore slide to power off message.
2. Release the power button when you see the apple logo (keep holding the home button)
3. Keep holding until you see a message.
Now restore from a backup!
Alternatively you can wait! -
my ipod touch has been locked,it now says "connect to itunes" i have done this but my itunes says to insert a passcode on my ipod touch so that it can conecct to itunes.But how can i when it wont let me?HELP!
just219, note that terms of use of this forum includes:
Do not ask for points. If you feel the system is not clear to users, please provide feedback to Apple; do not instruct other users unless they ask.
For peterevs169
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
Hi my ipod touch has been locked and i dont know the password to it.
Hi my ipod touch has been locked and i dont know the password to it. What do i do because my computer says it has to be unlocked before i can do anything. So if you have an answer that would be great thanks.
You have to restore the iPod.
Launch iTunes, and place the device in Recovery Mode per the instructions here: http://support.apple.com/kb/HT1808 -
hello,
when i try creating projects in Project center am posted on with this error.
Your new XXXX workflow has been created successfully, but
failed to publish and will not be listed in the Project Center.For more information on the failure, visit the My Queue Jobs page or contact your administrator.
Any help would be appreciated!!!!!
Thanks regards, Vignesh.hello Rouyre,
Thanks for ur reply
Am using
Microsoft Project Server 2013
15.0.4420.1017
Yes! It is Custom EPT with Custom Workflow(Declarative Workflow) built through VS2012
after associating the Site workflow with EPT i try creating Projects using my Custom EPT since then am posted on with this error.
ULS Error:Log
07/04/2014 10:21:38.03 Microsoft.Office.Project.Server (0x1840)
0x06B8 Project Server
Queue
ad3fy Critical
Standard Information:PSI Entry Point: <unknown> Project User: <unknown> Correlation Id: <unknown> PWA Site URL: SA Name: <unknown> PSError: <unknown> A queue job has failed. This is a general
error logged by the Project Server Queue everytime a job fails - for effective troubleshooting use this error message with other more specific error messages (if any), the Operations guide (which documents more details about queued jobs) and the trace log
(which could provide more detailed context). More information about the failed job follows. GUID of the failed job: 39cd36d6-3603-e411-b33e-00155d00091f. Name of the computer that processed this job: 3eebbc1d-7558-4050-bf5d-d985b23b89f5 (to debug further,
you need to look at the trace log from this computer). Failed job type: ReportWorkflowProj...
2c1ea19c-5849-002d-b89f-50aaf0a752fd
07/04/2014 10:21:38.03* Microsoft.Office.Project.Server (0x1840)
0x06B8 Project Server
Queue
ad3fy Critical
...ectDataSync. Failed sub-job type: ReportWorkflowProjectDataSyncMessage. Failed sub-job ID: 1. Stage where sub-job failed: (this is useful when one sub-job has more than one logical processing stages).
2c1ea19c-5849-002d-b89f-50aaf0a752fd
07/04/2014 10:21:38.03 Microsoft.Office.Project.Server (0x1840)
0x06B8 Project Server
Queue Jobs
ad3fy Medium
Error is: GeneralQueueJobFailed. Details: Queue Attributes: 39cd36d6-3603-e411-b33e-00155d00091f 3eebbc1d-7558-4050-bf5d-d985b23b89f5 ReportWorkflowProjectDataSync ReportWorkflowProjectDataSyncMessage 1 2c1ea19c-5849-002d-b89f-50aaf0a752fd
. Standard Information: , LogLevelManager Warning-ulsID:0x000DD158 has no entities explicitly specified.
2c1ea19c-5849-002d-b89f-50aaf0a752fd
07/04/2014 10:21:38.03 Microsoft.Office.Project.Server (0x1840)
0x06B8 Project Server
Project Server Database
ah91z Medium
Successfully got the connection string (database name=[ProjectWebApp_Practice], id=1f6004ae-5d8a-41d2-81f9-e424a31484aa, type=Consolidated). Requested access level=ReadWrite: Data Source=XXXX;Initial Catalog=ProjectWebApp_Practice;Integrated Security=True;Enlist=False;Pooling=True;Min
Pool Size=0;Max Pool Size=100;Connect Timeout=15
2c1ea19c-5849-002d-b89f-50aaf0a752fd
07/04/2014 10:21:38.04 Microsoft.Office.Project.Server (0x1840)
0x06B8 Project Server
Queue Jobs
ad3fz Medium
PWA:http://XXXX:10000/PWAPactice, ServiceApp:Project Server Service Application, User:PROJECTSERVER\system, PSI: [QUEUE] receiver http://XXXX:10000/PWAPactice: Group 3bcd36d6-3603-e411-b33e-00155d00091f type = ReportWorkflowProjectDataSync aborted at
Message 1, LogLevelManager Warning-ulsID:0x000DD159 has no entities explicitly specified.
2c1ea19c-5849-002d-b89f-50aaf0a752fd
07/04/2014 10:21:38.04 Microsoft.Office.Project.Server (0x1840)
0x06B8 Project Server
Queue Jobs
ad3f2 Medium
PWA:http://XXXX:10000/PWAPactice, ServiceApp:Project Server Service Application, User:PROJECTSERVER\system, PSI: [QUEUE] receiver http://XXXX:10000/PWAPactice: Group 3bcd36d6-3603-e411-b33e-00155d00091f correlation 82705dc5-3603-e411-b33e-00155d00091f
type = ReportWorkflowProjectDataSync failed at Message 1 Errors: GeneralQueueJobFailed, LogLevelManager Warning-ulsID:0x000DD15C has no entities explicitly specified.
2c1ea19c-5849-002d-b89f-50aaf0a752fd
Thanks regards, Vignesh. -
my ipod touch 5th generation has been locked out. it now says on itunes that i need to know my passcode in order to sign in with itunes on the computer..but i dont know my passcode so i cannot get on my itunes to reset my ipod because it said i need to know my psscode, but i dont know it. please help me
If you're unable to do the Restore, go into Recovery Mode per the instructions here.
-
My 4th gen iPod touch has been plugged in for hours but it won't charge or turn on
I have a 4th gen iPod touch. It has been plugged in for hours but it won't charge or turn on. I cannot restore it because it won't show up in iTunes. I have tried pressing and holding the home and/or the power key but that does not work as well. I have tried restarting Apple Mobile Support. I have updated my iTunes. I have tried EVERYTHING but it will not turn on at all. Any suggestions?
Hi BCarolinaCopper,
This sounds like you need to have a battery replacment this can be done if you have AppleCare or you will have to pay if unable to if the fault continues please
visit a apple store genuis bar contact them via this link or https://www.apple.com/uk/retail/geniusbar/ or through the support on https://getsupport.apple.com/GetproductgroupList.action
Good Luck -
It will not let me check train time table etc...but it will let me check resturants and garage websites. I have already set it. I am using a sky router and my internet everywhere else (on other PC's is fine) Please can you help.
Try
- - Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset networks settings: Settings>General>Reset>Reset Network Settings
- Power off and then back on the router.
You will have to reenter all network passwords.
- DId it work before with this network?
- Does it work OK with other networks?
- Do other devices have this problem? -
After updating to Firefox 6, the option in the Options-> General section to "Show my windows and tabs form last time" is grayed out and will not allow me to set it. If I go to the Firefox homepage, the option does not appear, nor does it appear if I go under the History or Firefox tab.
I tried to follow the directions on this website on the Session Restore page, but that seems out of date or just not helping.
I even went to the about:config (about:session restore does not work) and there was nothing I saw that would workFirefox 6 seems to change your settings in Tools Options Privacy to "Never remember history". Once you change this to "Remember history" it will restore your previous session, as long as the setting in Tools Options General Startup is set to "Show my windows and tabls from last time"
Bad idea Mozilla - installing 6 should pick up your settings from 5. This problem will confuse many users. -
I tried to create Apple ID via my ipod touch iOS 7 and finally my ipod has been stuck. How can I unlock it.
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
IPOD touch says that it is connected to wireless but it will not let me on the internet
Hello,
My ipod touch is acting up. The screen says that it is connected to to the wireless and it has a signal but when I open the Safari(Internet) app it will not open and will only open to google. My regular internet is working fine. Can any of you help me? Please and thank you.While I have no experience with this product, I do encourage you to view the manufacturers support page for further troubleshooting assistance.
http://www.apple.com/support/ipodtouch/assistant/wifi/
*******DISCLAIMER********
I am not an employee of BBY in any shape or form. All information presented in my replies or postings is my own opinion. It is up to you , the end user to determine the ultimate validity of any information presented on these forums. -
why is it that i cannot update my games and such on my cell phone my credit card has been charged twice so i would like to have my money put back on my card
Contct support for help:
http://www.apple.com/support/itunes/contact/ -
Download Firefox 7.0 (currently running out of date version)
Click to open file
Click Run to start running file
Ask for Admin password
Will not go further into installing
Please advise.Once I downloaded the update, I was unable to right click "run as administrator" from the exe file. How I was finally able to update to the newest version was to:
* click the start menu
* click search
* type in firefox
* scroll down to Firefox setup 7.0.1.exe
* right click and select 'run as administrator'
The rest was 'easy as pie'. Hope this helps those that had the same trouble I did. -
Once this happens, it takes a while like it is catching up but eventually will clear the jam. It has locked up and or crashed and I manually have to reset my computer.
This can happen if you've zoomed the page. That effects the screen dimensions as reported by JavaScript and seems to confuse Yahoo.
Reset the page zoom on pages that cause problems.
*<b>View > Zoom > Reset</b> (Ctrl+0 (zero); Cmd+0 on Mac)
*http://kb.mozillazine.org/Zoom_text_of_web_pages
Maybe you are looking for
-
Hi All, I have defined a connection pool to Sybase ASE 12.0. On WLS startup, the connection fails due to a login failure. Needless to say, the user and passwords are absolutely the right ones. IN included the def for the pool (config.xml) and the log
-
Is it possible to retrieve photos from an iPod Touch 5th Generation iOS 7 backup to iTunes on a MacBook, without using any other iDevice? I Backed up my iPod Touch 5th Generation iOS7 onti my MacBook using iTunes Later, I lost the iPod. I want to ret
-
Hi All, Scenario - 1. Material 'A' is part of different Sub Assemblies (SA-1 & SA-2). 2. After MRP run a requirement was generated for material 'A' (referencing SA-1) & this Purchase Requistion was converted to PO. 3. Subsequently when in the PO crea
-
Condition record deleted still it is reflecting in pricing
Hi Gurus, I have created sales order and saved when i was analyzing sales order i came to know that system has taken two taxes (VAT and CST) . After i realizing that there two condition records maintained in system then i have deleted one condition r
-
Reconciliation between Account balance and Deliveries in BP MasterData
Hi. Version 2007A We create a A\R Invoice for Customer. Customer pays it. Then he want to return items after and want some money back. How we can do this? (Not by A\R Credit Memo). When I do it by Return it affects Deliveries and return of money affe