My ipod touch is disabled. Please help me with my questions. It is my first apple device.
My ipod is disabled. When i turn it on it says to connect to itunes. I can get to where the screen displays a cord and an itunes logo, but itunes does not pop up, nor display my devices. This is probably because I have not synced my ipod with this computer, nor with any computer. How do I sync my ipod with itunes when it is disabled? How do I get itunes to pop up when my ipod is connected to the computer? Please dont give me a link, i really would like a step by step guide. I have itunes downloaded on this computer, but it does not pop up or display my devices. Do I need to create an itunes account? I have so many questions because this is my first apple device. If you were wondering, my ipod touch is disabled because I forgot my passcode. PLEASE help, I dont care if I have to reset my ipod, I just want to be able to use it!
Use Device Firmware Mode...
1. Turn off your ipod To do this, hold the home and sleep buttons for 10 seconds, ignore slide to power off message.
2. Release the power button when you see the apple logo (keep holding the home button)
3. Keep holding until you see a message.
Now restore from a backup!
Alternatively you can wait!
Similar Messages
-
My first generation ipod touch is disabled. need help to reactavated
My first generation ipod touch is disabled. need help to reactivated
Hi noraaziz,
Thanks for visiting Apple Support Communities.
If your iPod touch only shows the "Connect to iTunes" screen, see this article for steps that can help:
iOS: Unable to update or restore
http://support.apple.com/kb/ht1808
All the best,
Jeremy -
please help me with dis...
I am using iphone 4..32 gb...i hav updated to ios6..i am experiencing serious lags...watever m doin d phone lags n goes to the home screen...frequency is much greater..please help me with it...i even replaced my device but same problem on new one..!!!!Restore the phone as a new device. There is probably something that was corrupted on your phone during the update and has been passed via the backup to the replacement phone. If the corruption/problem is contained in the backup, you'll need to re-sync your data, and re-install your apps manually. Restoring the backup again will only bring the problem back with it.
If restoring it as new does not fix it, then make an appointment at the genius bar. -
Please help me with this questions "if I purchased items through mac or windows is it possible to re-download those purchases on Apple TV though iCloud"
It depends on what country you're in and whether or not they're still available in the iTunes Store. Some purchased movies and all rentals won't be available.
(108225) -
Please help me with some questions with batch input session?
hello everyone.
I come to some questions like
1 What is a batch input session ,
2 What is the alternative to batch input session?
3 An ABAP program creates a batch input session. We need to submit the program and the batch session in back ground. How to do it?
would you please help me with the questions, couldn't thank you more.
Best regards
FrankHi
Batch Input Session:
BATCH INPUT SESSION is an intermediate step between internal table
and database table. Data along with the action is stored in session
ie data for screen fields, to which screen it is passed, program
name behind it, and how next screen is processed.
Three processing modes of executing Batch Input Session :-
Run Visibly : You can correct faulty transactions online & work step-by-step through the transactions not yet executed.
Display Errors only : You can correct faulty transactions online. Transactions not yet executed, but without error, run in the background.
Run in Background .
2) What is the alternative to batch input session?
Call transaction.
3) An ABAP program creates a batch input session. We need to submit the program and the batch session in back ground. How to do it?
go to SM36 and create background job by giving
job name,job class and job steps (JOB SCHEDULING) -
HT1430 my ipod 4 is disabled.Please help!!
IPOD IS DIsabled.Please help!!!!
Recovery mode will work. BUT if your like most people you probably dont want to lose all your information. Sometimes if you just plug your ipod into a computer you have used before it will just unlock it for you! Sometimes if that doesnt work you can try to just back up your stuff to your computer unless you already have your stuff backed up to iCloud.
In that case get a computer get on any internet provider and go to www.icloud.com sign in and go to Find My iPhone. From there click on your devise and do a remote wipe. Personally I find this much easier than to have to mess with downloading software on your computer and all the other crap.
Hope this help! -
White screen on ipod touch 2g. PLEASE HELP.
I need help i recently had to replace my screen(lcd) and i did it but all my screen did was light up no apple logo just white screen i did everything replaced screen i did the home button sleep button thing restored etc. please i have a worthless ipod till you help. PLEASE HELP i will do anything. i took the whole thing apart to make sure again and still nothing.
Hi,
If you haven't already, try restoring the iPod touch and setting it up as a new device as shown here: http://support.apple.com/kb/HT3828.
The iPod will likely need service if the issue persists after restoring as new. You can get the iPod touch replaced by make a reservation with a Genius here: http://www.apple.com/ca/retail/geniusbar/.
This webpage: http://www.apple.com/ca/support/ipod/service/faq/ provides answers to Frequently Asked Questions about iPod service.
-Jason -
It feels like my iPod touch 5 has been a bit slow lately. All my apps are closed, I think there has been a day I don't use my iPod for like a week or two. Please help. Thanks so much for the help in advance.
Basics from the manual are restart, reset, restore
-
What if my ipod touch says disable please connect to itunes but when i do it doesnt work?
Well some one changed my ipod password and now its completely disabled.. everytime i put it to itunes like its says.. its doesnt work -___- please helpp!!
Connect iPod touch into computer. Put the device in DFU Mode.
Restore iPod touch in iTunes after put in DFU Mode. -
Help!!! Ipod touch problems. PLEASE Help!!!!
Hey guys, I've been having some trouble with my Ipod i just got. I have a friend who just pick up an Iphone and didn't need his anymore. So I picked it up from him.
It was working fine at his house and last night. I was trying to sync my music to it and I woke up and it wouldn't turn on. So I hooked it back up to my computer. I was able to sync up a lot of my music but I went back to add more. Well, I started to hook it up and it offered me to restore the factory settings and I did. I was able to get everything on it. It played a couple songs and I left it alone for a bit and it shut off. It wouldn't turn back on. So I hooked it back up to my computer and restored the the factory settings again. Then it turned off again and would not turn back on. I tried to restore factory setting again and I must have messed something up. I'm getting the 1600 error message.
I don't know what to do. Please help. I have updated itunes and everything else. I don't know what else to do. He hadn't used it in awhile, but it was working well.
I have not Jailbroken it. Neither did the person that owned it before me.
SOme guy was trying to say I fried the logic board. It was working all I did was hook it up to my computer. If I try to restore on another account on my computer it gives me the 1604 error. I pretty sure that if it was fried I would be getting one error message constantly.
Please help!!!!!No one can help me!?
Thanks. -
Something's Wrong With My iPod Touchs' Screen. PLEASE HELP
Ok. Well i jus got an iPod Touch for Christmas. It's been working fine up until a few days ago. What's wrong is that my screen is not working right all of the sudden. About halfway down the screen the screen won't respond when I touch it. It's like i never even touched it at all. The rest of the screen works perfectly when I touch it but it's only a horizontal area across the middle of the creen that won't respond. I have already reset it 3 times and i even restored it back to factory condition but still, nothing. If anyone has had this same problem or knows how to fix this, PLEASE tell me how to get it working again. This device is like 2/3 of my life nd i wud hate to not be able 2 use it anymore. Thanks!
For General reference for the community here is a link that can be provided if the country is unknown to those posting.
http://www.apple.com/support/contact/phone_contacts.html
Hope you all find this useful. -
Can't add songs to ipod touch...Please help?
Okay. I downloaded some new songs to my computer. I added them to my ipod without any problems. Then I went to add them to my sister's ipod. The first 5 songs went on just fine, but when I tried to add the next few songs, I said something along the lines of "Unable to sync, unknow error" and then a 4 or 5 digit number. It only said it once and the message doesn't pop up again when I try again so I have no idea what the numbers were.
Now whenever I drag songs to the ipod, the ipod is highlighted and the box with the plus sign shows, as if it is going to work. But when I release the song, nothing happens. It doesn't sync the song, there's no error message, nothing.
I'm really reluctant to do a restore or anything similar because our music is spread out over about three different computers, and several months ago I had a virus on my computer so some of my music isn't on ANY computer.
I've already tried restarting both the ipod and the computer, and I tried plugging the ipod in- Reset the iPod. Nothing is lost.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Also reboot the computer.
- Then try again and remember the complete error message
Could this have been the error number:
iTunes: Error 13019 during sync -
So i have Downloaded Itunes and still do not know what to do to update my IPod Touch (generation 3)
If your iDevice is using a version of iOS lower than 5, you will need to use iTunes on your syncing computer to perform the upgrade. Use the Apple link below as a guide for the upgrade.
http://support.apple.com/kb/HT4972
Also read the instructions from the section entitled "Update your device using iTunes" at the link below.
http://support.apple.com/kb/HT4623
Information regarding transferring purchases from your iDevice to iTunes on your syncing computer can be found at the link below.
http://support.apple.com/kb/ht1848 -
Please help me with this question ftp
please help me to continue i don't know how to finished
import java.io.BufferedReader;
import java.io.IOException;
import java.io.InputStream;
import java.io.InputStreamReader;
import java.net.URL;
public class myftp2 {
static String host = null;
static String path = "/";
public static void main(String[] args) {
if(args.length != 1) {
usage();
System.exit(1);
host = "ftp://"+args[0];
if( ! isOpen() )
System.out.println("Cannot connect to "+host+path);
System.exit(1);
System.out.println("Connected to "+host+path);
BufferedReader kb = new BufferedReader( new InputStreamReader(System.in));
boolean finished = false;
while( ! finished ) {
String input;
String[] cmdArgs;
System.out.print("myftp> ");
try {
input = kb.readLine();
cmdArgs = input.split("
s");
if(cmdArgs[0].equals("exit") ) {
finished = true;
else if( cmdArgs[0].equals("dir")) {
dirCommand();
else if (cmdArgs[0].equals("get"))
else if( cmdArgs[0].equals("pwd")) {
System.out.println(host+path);
else if( cmdArgs[0].equals("cd")) {
if(cmdArgs.length!= 2) {
System.out.println("You must include the directory name");
else
cdCommand(cmdArgs[1]);
else if (cmdArgs[0].equals("cd.."))
//cdCommand(cmdArgs[1]);
catch(IOException e){
System.out.println("Goodbye");
static void usage() {
System.out.println("Usage: java myftp <hostname>");
System.out.println("please write your username:password@<hostname>");
static boolean isOpen() {
try {
URL url = new URL(host+path);
InputStream in = url.openStream();
in.close();
catch(IOException e) {
System.out.println(e.getMessage());
return false;
return true;
static void dirCommand() {
String line;
try {
URL url = new URL(host+path);
InputStream in = url.openStream();
InputStreamReader inStr = new InputStreamReader(in);
BufferedReader inNet = new BufferedReader(inStr);
while((line = inNet.readLine()) != null)
System.out.println(line);
catch(IOException e) {
System.out.println("Error: cant list the directory");
static void cdCommand(String directory) {
static void cdCommandback(String dir)
}Please stop crossposting this question.
http://forum.java.sun.com/thread.jspa?threadID=5253698&messageID=10050532#10050532 -
Please help me with this question..
Hi everyone,
Sorry for asking the same question which was posted many times in this forum.
I have the following scenario..
Database name: database1
schema names: schema1
schema2
schema3
schema4
schema5
schema6
schema7
workspace is with: schema1
schema2
1. can i create 1 application that need to access tables in both schema1 and schema2 ?
comments: I think we have to choose "parsing schema" when i am creating an application.
if i choose the parsing schema as "schema1".
2.how can i create a "form on a table" or some other wizard based forms which is in schema2?
3.what priviliges do i need to create "form on a table" or some other wizard based forms which is in schema2?
4.As my workspace is with schema1 and schema2. How can i create "forms" on tables which are in
schema3? do i need to "create a view of table in schema3" in schema1?
All the above question will raise if i have to create forms or reports with "wizards". Is this stmt correct?
I mean if i create a form "manually" all i need to look whether i have insert,update and delete priv on
that object? is it correct?i think this question was answered several times.sorry for the repost.
ThanksIt is not necessary to say "please help me" since help comes almost always. Maybe sometimes you need to bump your question after a while. However, back to your question. I can tell you how I solve that problem:
granting select, insert, update, delete on all tables to the parsing schema
granting select on all views to the parsing schema
granting execute on all procedures and packages to the parsing schema
creating synonyms in the parsing schema for all tables, views, sequences, etc.
You can do all of this programatically in a loop instead of writing it for each object separatelly.
Denes Kubicek
http://deneskubicek.blogspot.com/
http://www.opal-consulting.de/training
http://apex.oracle.com/pls/otn/f?p=31517:1
------------------------------------------------------------------------------
Maybe you are looking for
-
How can I migrate my itunes music and playlists from my old PC to my new macbook?
Hi I have a approx 250 GB of music and itunes content to move to my new macbook pro (running Lion) from my PC laptop (Windows 7) I'd like to retain all the playlists that I have painstakingly built over the past few years but I dont want to rebuild t
-
Hello.. does anyone know how i can sync my smart mailboxes on my desktop mac(imac) with my laptop mac (macbook)?
-
Hello, new Arch-user here. Since I personally think that logging in to root, execute a command and then return to my own account is quite a hassle, I'm fond of using the sudo-program. Unfortunately it does not work. For instance, if I wright "sudo pa
-
Can I make a recovery email for an Apple ID that already exists
How do I do that?
-
Fields in custom view is only populated when Edit button is clicked
I have enhanced the component BT111H_OPPT. I added three custom views to it. I have enhanced CRMD_CUSTOMER_H with the required fields using EEWB. The context node BTCUSTOMERH is created as a dependent node on BTADMINH. Below is the code for creating