My iPod Touch is frozen and I just updated it to the 4.3.4
It is frozen on the screen where the battery is that shows how much it is charging when it is plugged in and the 'slide to unlock' is showing but it will not let me slide it because it is frozen. I just updated my iPod to 4.3.4 today. And I unplugged it from the computure and it had been about 3 hours since it was done updating my iPod and when I unplugged it I didn't push the disconnect button on the computure. And now when I plug it back in it tries to sync and it says " Itunes could not back up the iPod "Maddie's Ipod" because a session could not be started with the ipod". I don't know what to do to fix this, please help!
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Similar Messages
-
Can anyone awnser this?
- You can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
However, you only can download the current version of app.
- For apps your only way is if you have the version that was compatible on your computer such as in the recycle bin/trash or in a computer file backup. In that case delete the current version that is in your iTunes App library and replace it with the older version. Then sync. -
My iPod touch is frozen and asking me to connect to iTunes and when I do connect to iTunes the iPod does not show up. What can I do?
Try placing in DFU mode and then restoring.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
Last, try restoring on another computer. -
i reset my ipod touch 5th generation and i just reset my apple id and password and it wont let me activate my ipod. I need help!!
What happens when you try? Error message?
To activate you have to enter the ID and password last used for Settings>iCloud. In most cases the Apple ID is used for Settings>iCloud but not always.
If problems contact iTunes
Apple - Support - iTunes - Contact Us -
I have an ipod touch 4th generation and have just recently downloaded the new update. I was wondering why the videos that I had added in my playlist won't show up. Is there anyway that I could get my videos to appear in my playlist? They are still in my ipod in the video section, but just won't appear in my playlist.
iOS6 problems aplenty ....not sure if the link I inserted is working or not, but the issue is a lot more prevalent - the issue being that what shows up & plays in iTunes after the iOS6 update is not what shows up (& plays) on the device itself. This may go beyond just the iPod Touch as well.
In my case I can see & play both audio & video files in my Playlist through iTunes, but can only see the Playlists on the iPod Touch with ALL of them being empty. Syncing numerous times no help. Contacting Apple Tech. Support no help - they suggested downloading my Purchases from the iTunes Store - waste of time, did not make a difference. It is clear Apple needs to release a fix to OS6.
Another problem I noticed on the device is that the Shuffle option is hidden on the built-in Songs Playlist, having to swipe the screen down to see it - dumb dumb dumb. -
HT1414 ipod touch has frozen and wont turn off
my ipod touch has frozen and wont turn off, ive left it so it locks but it wont go that far...what should i do? thanks
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
My iPod touch is frozen and it will not turn off or anything. What do I do?
My iPod touch is frozen and it will not turn off or anything. What do I do?
I DON'T KNOW WHAT TO DO, PLEASE HELLP ME!!!!!
I need help!!!If not successful, try the remainder of:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
my ipod touch is frozen and it has a picture of a usb cable and the itunes icon, can any one help me??, my ipod touch is frozen and it has a picture of a usb cable and the itunes icon, can any one help me?? anything would be helpful!
What exactly happen? If it started and froze, at what stage did it freeze?
Maybe this:
Hang during restore process
Following Troubleshooting security software will frequently resolve this issue. This issue can be caused by the default packet size being set incorrectly. There may be third-party software installed that modifies the default packet size in Windows by inserting a TcpWindowSize or MaxGlobalTcpWindowSize entry into the Registry. Contact the manufacturer of the software that installed the packet-size modification for assistance in adjusting this TcpWindowSize values. Typically the default packet size is modified by 3G cellular network card software, ISP communication software, or Internet speed download optimization software. There are legitimate reasons to change the TCP/IP packet size and not use the Windows default settings (for example, network traffic optimization, home/broadband optimization, enterprise app optimization such as database apps, Exchange, and more). Deleting the "TcpWindowSize" or "GlobalMaxTcpWindowSize" entries in Windows Registry could affect the system's performance with other apps or on their network connections. Deleting the customized TCP/IP settings may require the reinstallation of any third-party applications that had modified the TCP/IP settings from the Windows default settings.
There are two ways to resolve this:
You can follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) , or follow the steps below to manually find and remove TcpWindowSize and MaxGlobalTcpWindowSize entries from the Registry.
For Windows XP, Windows Vista, Windows 7: Go to the C:\Windows folder and launch regedit.
Go to Edit > Find.
Search for "TcpWindowSize" entries. There are typically multiple entries of TcpWindowSize/GlobalMaxTcpWindowSize spread throughout the entire Registry. If "TcpWindowSize" exists, one or more third-party applications have changed the user's default Windows settings for TCP/IP.
Go to File and select Export. This step will export a copy of the Registry that can be used as a backup of the original settings.
Delete the "TcpWindowSize" entry.
Search for the next "TcpWindowSize" entry and delete each one until the Registry no longer has any "TcpWindowSize" entries.
Close Regedit, restart the PC, and test.
If you are uncertain as to why these registry entries exist and the PC is a business computer, contact your network administrator and determine what values TCP/IP can be set in their Windows Registry setting so that the PC can update or restore an iOS device rather than deleting the "TcpWindowSize" entry.
If editing the registry does not resolve the issue, restoring on a different computer that did not install the communication software is the step most likely to resolve this issue.
I would first try restoring on another computer. -
Itunes wont recognize my ipod touch 5th generation and i tried updating itunes to 11.0.1 but i cant
itunes wont recognize my ipod touch 5th generation and i tried updating itunes to 11.0.1 but i cant what should i do?
it says somethings wrong with "apple moblie device"
-
My ipod touch accidentally fell and it kind of separate Does the warrant covers this?
My ipod touch accidentally fell and it kind of separate. The screen and white part separate in one corner from de metalic part and I can see the Ipod inside. I'm really worried please help me. I need to know if the warranty covers this. One more thing I bought my Ipod touch in USA but I live in Colombia.
Sorry, the warranty does not cover accidental damage.
Stedman -
i just bought this ipod touch 2nd generation and te wifi is greyed out ive tried resetting and looking for airplane mode but its not there any help please????
See:
iOS: Wi-Fi or Bluetooth settings grayed out or dim
One user reported that placing the iPod in the freezer fixed the problem. A trick that works frequently with iPhones:
Settings > AirPlane Mode ON, Do Not Disturb ON
Power down and wait 5-10 minutes
Power up
Settings > AirPlane Mode OFF, Do Not Disturb OFF
If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
Apple Retail Store - Genius Bar -
My Ipod touch is frozen and wont resetby holding both buttons?
My I pod touch is frozen and will not reset by holding both buttons?
- Try:
iOS: Not responding or does not turn on
- If not successful and you can't turn the iPod fully off, let the battery fully drain. After charging for at least an hour try the article again.
- If still problem that indicates a hardware problem and an appointment at the genius Bar of an Apple store is in order. -
IPod Touch 1st Gen and 3.1 update DELETES volume slider
I had a perfectly working iPod Touch 1st Gen/16GB until I updated to 3.1 software. Now I do not have a volume slider.
Yes headphones are in but there is no place to adjust the volume. There is previous, next arrows and play and pause AND its centered in the rectangular area, but no volume slider.
I have restored it 3x in various ways. I have tried 5 times to downgrade the operating system but ALWAYS get an error, so it never completes. Of course the ipsw files where found using google because there isn't any links that work on Apple's site for previous iPhone software. If I try to restore to 3.1 right after that it goes through perfectly.
So it seems that Apple has locked out downgrading once you upgrade! All I want is my volume slider back. How can I get it back if 3.1 deletes it everytime and I can't go back to the previous operating system?
Thank you.I too have had this exact same problem, except that I was running 3.0 and hadn't updated to 3.1. I put my ipod on the table overnight, after listening to it, and when I picked it up the next morning, theres no volume slider. I never even unplugged the headphones. Double clicking the home button while on the home screen would bring up the popup to skip songs, and there it says "Dock Connection" even though it not connected to a computer. Multiple reboots an no effect. I've tried different sets of headphones, to no effect. Its like the iPod isnt detecting them being plugged in. The worst part is i DO get sound in the headphones, but no volume control, and the sound level is turned really low. So the headphones ARE working.
I updated to 3.1 just now, and the problem has NOT been fixed. Theres no way anywhere in the settings to adjust the volume. Theres only a limit slider, so I have no way to turn up the volume loud enough to actually HEAR things. -
while updating my ipod touch something happened and now the screen only shows the apple logo that goes on-off. i dont know what to do,please somebody help me!
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Help please! My ipod touch has been acting a little funny lately (freezing often, running out of battery even though it's off, skipping or stopping tracks...). Now it's just plain frozen- it will not respond to holding the middle button down for long periods of time or the off button. it is just blank except for up top still has the same text as usual "ipod" with the time in the center and a full battery charge icon. I have tried everything but restoring as I will lose 85% of my music b/c my old files were lost when my old computer died and now are only on the ipod. Any suggestions? Thanks!
have you tried holding down the home + sleep button together? this could possibly work.
Maybe you are looking for
-
No longer able to view images saved on external HD
I have been using an external HD for about 9 months and it holds my iTunes and iPhoto libraries. In the past few months I have encountered a problem opening photos with iPhoto: I can see the photo rolls (thumbnails), but when I double click on the th
-
downloads do not appear all (only the first two) in the download statusbar (could be a ff19 or downloadhelper or unmht problem) and none in the download window used ff19 with Download Statusbar v0.9.10 by Devon Jensen UnMHT v6.2.0 by http://www.unmht
-
Running GL Journal Import for HR Budget
I'm trying to run the GL journal import for HR Budget after having posted the budget to GL, but there are no values in the LOV for Ledger. I'm guessing that I might have to set my security profile for PSB:GL Budget Set, however when I try to do that
-
Kernel Panic Log, New logic board, new ram....same problem.
I have had continuous problems with my computer. First Apple said it was the Ram...replaced...same thing still happening. So they said oh, must be the logic board...replaced...still happening. Glad I have apple care or i might be more angry. ha. Basi
-
Compare Two Date - Very Urgent
hi to all, i want to compare two date.. i m getting one date from database and having current date.. what my issue is i want to dispaly error message when database date greater than current date value.. pls help to my problem...