My iPod Touch is in Recovery Mode and iTunes Won't Detect It ?

iPod Touch 4G
iOS 5.1
Purchased 2010
I Opened Up iTunes and Upgraded to iOS 5.1.1 from 5.1 as a "Download Only". The Next Morning I Go To My Computer Plug In My iPod and Update. My iPod Then Goes into Recovery Mode and When I Quit Recovery mode It goes straight to recovery mode again with and without the cable. iTunes does not detect it when i plus it in and neither does my computer, i have tried restarting apple mobile support and that does not work. The nearest apple store is 20 miles but i could go there.

See if you can kick it out of recovery mode with RecBoot.
Basic troubleshooting steps  
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
 In Memory of Steve Jobs 

Similar Messages

  • My iPod touch stuck in recovery mode and can not be detected by my lap top.  HELP PLEASE!! Thanks

    It stopped chargin and now is not being recognized by my computer, it says that the device has malfunction. It also is stuck in recovery mode but since it is not recognized by my computer it does not appear in iTunes either.

    - See if placing the iPod in DFU mode will allow iTunes to see the iPod.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
    - Try another cable
    - Try different USB ports
    - Try another computer.
    - Last, make an appointment at the Genius bAr of an Apple store

  • My ipod touch stuck in recovery mode and itunes doesnt reconize ipod what can i  do?

    my ipod stuck in recovery mode itunes dont reconize or show device and i dont have access to orginal computer what can i do to solve this problem

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar                              

  • I 'think' my Ipod Touch is in recovery mode and people say to hold the power and home button for 10 sec and i did, but its still not turning back on. Plus its dead and wont charge

    I 'think' my Ipod Touch is in recovery mode and people say to hold the power and home button for 10 sec and i did, but its still not turning back on. Plus its dead and wont charge. PLZ HELP ME!!!!

    - If in recovery mode the screen will have an iTunes logo with an USB plug.
    - Have you tried connecting it to your computer for a n hw and then see if it appears in iTunes. If it does restore the iPod.
    - If screen is blank, try placing he iPod in recovery mode and then restoring. For recovery mode:
    iPhone and iPod touch: Unable to update or restore

  • Ipod touch stuck in recovery mode and will not restore. error code 3194

    ipod touch stuck in recovery mode, will not restore and comes up with error code 3194, itunes is up to date, please help

    Hi @rchangel - Thanks for the ideas...
    Yes - it won't let you install the 32 bit version on a 64 bit machine.
    I've had a cursory look at the SP1 release notes, and couldn't spot anything vital - what critical stuff do you know of in SP1?
    I don't want to have to go through all the pain of setting up VM's, reinstalling iTunes, getting all my album art back in etc. (though I could, as I do have Win7 pro). I've also heard that running iTunes in Windows 7 compatibility mode might help. Can anyone confirm whether that actually works?
    I think it's in Apple's gift to fix this issue, given that they say that they support Windows 7. So far I've had no feedback from a mail I sent to Apple, and the number of users reporting this problem keeps going up and up.
    I want Apple to recognise that there is a problem, and then I want them to fix it.

  • My ipod touch is in recovery mode and I don't want to restore it

    My ipod touch is in recovery mode but I don't have my photos, apps, videos backed up.  How do I keep my stuff without restoring it?

    If this program will not get it out of recovery mode (very doubtful) you will have to restore and erase the iPod.
    RecBoot: Easy Way to Put iPhone into Recovery Mode

  • After 4.3.4 update the ipPad is in Recovery mode and iTunes doesn't detect the device

    Hello,
    brand new Win7 installation, restored iTunes folder and installed latest 10.4. iTunes64 bit.
    Hooked up both my iPad and iPhone4
    Detected new firmware 4.3.4
    and bang, both devices are now stuck into recovery mode.
    No matter I set the iPad/iPhone into Recovery or DFU mode, iTunes will not detect any device for recovery.
    Uninstall/Install iTunes => no change
    The driver will display that the units is detected and in DFU or Recovery mode, but iTunes doesn't detect the device.
    Tried TinyUmbrella etc but no fix
    Any other hint?
    Best Regards
    Uwe

    Place the device in DFU mode (google it) then restore.

  • HT201210 my ipod touch is in recovery mode and wont restore?

    my ipod touch 3rd generation 8gb is in recovery mode. it has been charging but nothing has happened and i am unable to turn it on.i connected it to itunes and was told it needs to be restored. i tried this but it said that the software for this is currently unavailable. i updated itunes and tried again but the same happened.
    does anyone know what to do?

    - Try deleting the downloaded firmware file and try restoring again. A new file will be downloaded. It is located here:
    IPSW file location for Mac and Windows
    - Try placing the iPod in DFU made and then restore.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

  • IPod Touch stuck in recovery mode and not detected in iTunes

    I was trying to update my iPod Touch (currently 3.1.3), so I downloaded the 4.3.3 firmware (I didn't want to download the 4.3.5) and connected my iPod to my computer, opened iTunes and hit Shift+Restore. Then, I chose the 4.3.3 firmware and proceeded with the restore.
    However, the following appears:
    Error 1602
    I pressed OK and the restore process stopped. But, my iPod is stuck in recovery mode. Every time I reboot it, the recovery mode shows up. It's also not detected in iTunes although my computer recognize it as iPod Touch Recovery Mode.
    Please help me solve this. I can't use my iPod.

    Error 1602: Try the following steps to resolve this error:
    Ensure proper USB isolation troubleshooting has been performed, and test with a known-good cable.
    Follow the steps listed for Error 1604.
    This error may be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.
    Above from:
    http://support.apple.com/kb/TS3694
    Also, when updating/restoring an iDevice, iTunes contactact the Apple sever to verify that you have the latest iOS version.  If not, it will not allow an install if an earlier version.

  • IPOD TOUCH stuck in recovery mode and cant restore

    My ipod touch is stuck in recovery mode and wont restore when i turn on my ipod it says connect to itunes so i then connect to itunes it then notifies me that im in recovery mode and to get out i need to restore I go on to restore it extracts the software it starts restoring and about a quarter done it just stops it doesnt give me a error code it just stops someone please help me

    Temporarily disable your firewall and antivirus software and try again...
    See here for Connection Issues
    http://support.apple.com/kb/TS1379
    From Here
    http://www.apple.com/support/itunes/troubleshooting/

  • What to do when your ipod touch is in recovery mode and you dont have access to itunes

    I just got done updating the Ipod . And I had to conect it to iTunes but I am not able to access my iTunes.
    Anything i can do ?

    You have to connect the iPod to your computer and restore via iTunes. The computer has to have an internet connection
    Try DFU mode if necessary to allow the restore.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

  • My iphone 5 is stuck on recovery mode and itunes is not detecting my phone when pluged in

    My iphone 5 is stuck in recovery mode and the phone is not being detected by itunes when the lead is pluged in, this all started when i was trying to update the phone to latest software any ideas????

    Placing your device into recovery (DFU-Device Firmware Upgrade) mode:
    Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
       1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the
           other end of the cable connected to your computer's USB port.
       2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds
           until the red slider appears, then slide the slider. Wait for the device to turn off.
                  * If you cannot turn off the device using the slider, press and hold the
                    Sleep/Wake and Home buttons at the same time. When the device turns off,
                    release the Sleep/Wake and Home buttons.
      3. While pressing and holding the Home button, reconnect the USB cable to the
           device. The device should turn on. Note: If you see the battery charge warning,
           let the device charge for at least ten minutes to ensure that the battery has some
           charge, and then start with step 2 again.
      4. Continue holding the Home button until you see the "Connect to iTunes" screen.
           When this screen appears you can release the Home button:
      5. If necessary, open iTunes. You should see the following "recovery mode" alert:
      6. Use iTunes to restore the device.
    If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
    Additional Information:
    Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information.

  • IPod Touch Stuck on Apple Screen and iTunes won't recognize

    I was resetting my ipod touch to clean it off to give to my sister. I thought it was plugged in, but turns out it was not, so the battery died while it was resetting itself. Now it is stuck on the apple screen. I have tried everything to reboot it and get iTunes to recognize the device, but nothing has worked. I had my computer cleaned, so iTunes is brand new and has never been hooked up to this iPod Touch. I need help please!!

    TRy placing the iPod in DFU mode and then restoring. See:
    http://geekindisguise.wordpress.com/2009/07/16/how-to-put-ipod-touch-iphone-into -dfu-mode/

  • My Iphone is stuck in recovery mode and Itunes won't help !

    My Iphone 4s is stuck in recovery mode and i tried to connect it to itunes but it would start to restore it then stop and something would pop up saying error what do I do ?

    What are the exact words of the error message?

  • Ipod touch is in recovery mode and cant get it out..What should I do?

    Please can someone help w ipod touch?   

    If you don't have the time yet to connect to iTunes, push the sleep button to switch it off. If this does not work, connect in recovery mode to restore, see this article how to: http://support.apple.com/kb/HT1808

Maybe you are looking for

  • How change the background color of a tab

    Hi, i want to change the background color where the tab name is ...Not the color of the canvas only the part of the tab. Show me the default color some kind of green ... Regards

  • Printing Crystal reports into adobe-hyperlinks arent getting created

    We use a third party program, iMIS to print confirmations.  These confirmations are created in Crystal Reports.  When i print these documents to adobe not all hyperlinks are coded. If i export the document to word then print that document into adobe

  • Final Cut Express changes the video aspect

    Hello. I imported some videoes from m Sony-sr32 HandyCam with iMovie 08. The videos were captured in a wide screen format, and iMovie shows them in wide screen. However, when I import the movie files to Final Cut Express it plays them in a normal 4:3

  • Smithsonian Channel Sound Issue

    Hello, I notice that on Smithsonian Channel HD sound fades from the normal volume to lower volume then back to normal . Anyone knows why its happening? thx

  • USMM SHOWING ERROR

    Dear All, I have to give the system measurment of my system (production and development)but the problem is that when i trying to run system measurment its showing the error ONE MEASURMENT JOB STILL NOT STARTED OR STILL RUNNING. How to recognize which