My IPod touch is new and yet it will not let me get on my downloaded items. How do I fix that?
My Ipod is brand new but whenever i go to get on my downloads it will not let me on the screen just goes back to my home page. How do i fix this??
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
Similar Messages
-
Update forced me to restore my iPod touch 4th gen. and now it will not turn on.
After putting new music on my iPod touche 4th gen. I attempted to update the software. When I did I got a message that told me y iPod was in "Recovery Mode" and needed to be restored. So I clicked "Restore" and waited while iTunes prepared to Restore my iPod. When it had finished my iPod went black and I could no longer do anything with it.
Hi,
See the Troubleshooting Tips in this Link:
http://www.apple.com/support/ipodtouch/assistant/ipodtouch/
This may also be Helpful:
http://support.apple.com/kb/ts1445
Cheers, -
my ipod will not function very well with this
Triple click the home button and try going to Settings>General>Accessibility and turn it off off. You may have to use three fingers to scroll the screen to get there. If problems see:
iPhone: Configuring accessibility features (including VoiceOver and Zoom)
Next restore from backup if you have not backed up after turning it initially on.
Last, restore to factory settings/new iPod -
Brand new iPod 5 and periodically will pick up our home Wifi, but when it loses it, it's impossible to reset. Says "incorrect password" and it is the correct password. No issue at all with Android devices or anything else on Wifi. Only the iPod and an iPhone 4. My iPhone 6 had the same issue, but I was able to correct it by resetting the network. This "fix" doesn't work on the iPod or old iPhone. Just keeps saying "incorrect password" no matter what you do. Connection has been reset, passwords have been changed... Nothing fixes it. And both are operating on the latest iOS update. I just updated it. Still doesn't work. How crazy.
Does the iOS device connect to other networks? If yes that tends to indicate a problem with your network. Yes
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before? no
Try the following to rule out a software problem: (Not clear what you did)
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem. Since it connects to other networks that indicates a problem with your network
Apple Retail Store - Genius Bar -
My niece entered my 11yrs information when setting up her new ipod touch for itunes and now it will not even let me get on itunes on the ipod. How can I fix this?
Try editing the account on a computer
iTunes Store: Changing Account Information
Next try creating a new account using the same email address.
Last, contact iTunes by:
Contact iTunes -
i was downloadin the new software to mi ipod touch 4 gen and it was very slowso i had to cancel the download of the software and i had to synk some stuf but when the synk was done it sed the ipod moyses"s ipod cannot synced anankhown error occurred(13019)
Try:
iTunes: Error 13019 during sync -
My IPOD Touch initially had a white screen. I tried correcting this by restoring default settings via ITunes. The Restore Failed with error 1602 and now the IPOD touch is completely dead. It will not power on or respond when I plug it into my PC via USB. I get an error on my PC stating that device attached to USB port is not recognizable. Can anyone help?
Error 1602: Try the following steps to resolve this error:
Ensure proper USB isolation troubleshooting has been performed, and test with a known-good cable.
Follow the steps listed for Error 1604.
This error may be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.
Above from:
http://support.apple.com/kb/TS3694 -
got a new ipod touch 4th generation but i tunes will not recognize it after i updated my itune, help
What happens when you try to install the iTunes update? Error messages?
You might have better luck posting in the iTunes forum sinc you have an iTunes problem, not an iPod problem. -
My ipod touch ios version 6.1.3 will not allow me to connect to my wifi. I tried rebooting my wifi router, refreshing my ipod, resseting the networks and manually logging into my wifi. Sometimes it will go through for a brief moment, but the wifi connection will ultimately disconnect. Each time i try to connect to my wifi afterwards a small pop up will say "Unable to join the network". Please help. it's really annoying and frustrating.
Thank you Carolyn Samit, but nothing is working.
I've restored my ipod both to a backup and back to factory. I know the password is correct,
the router is the newest version (and it's plugged in and on), my ipod is updated, i've turned my wifi settings on and off, i've turned the ipod off and on. No luck yet. I've been working on it for hours now. About ready to sleep on it...maybe some luck will find me tomorrow...
Still in need of dire help. -
MY ipod Touch is Stuck & says Disabled it will not come out of that screen at all. How can I get that off so my device will work
Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Forgot passcode or device disabled
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.
If you previously synced to the computer then you may be able to recover use of the iPod without erasing the iPod by following the instructions here:
Disabled Recovery-must use syncing computer. -
My ipod touch is frozen on the disabled screen because my passcode was entered wrongly numerous times, how do I fix it?
The options are listed at the bottom of this article: http://support.apple.com/kb/HT1212. The best option is the first (listed under "If you have previously synced with iTunes"): back it up and restore it on the last computer it was synced with after setting the passcode.
-
I want to update my IPODtouch, but it will erase all my data. How do I sync my ipod to a new computer so itunes will not erase my data???
Follow these instructions. When you restore the iPod from backup as the article says your iPod will also be updated.
Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities -
so i got ios 7 in beta on my ipod touch, now several months later, it says my ipod touch needs to be activated. it wont activate over wifi or when connected to itunes. how can i fix this?
You say you have iOS 7 beta. If you are a developer you have access to the private OS 7 developer's forum
iOS 7 Developer forum- Apple Developer
Otherwise you are on your own since you have a bootleg copy
PSA: iOS 7 If you're not a developer, don't install developer betas on your iPhone | TUAW - The Unofficial Apple Weblog -
I HATE my new MACBOOK PRO, it will not let me open any PDF files and I downloaded the ADOBE READER three freaking times and it keeps saying that all the files are corrupt or damaged. I would rather have my 2008 Dell at this point. what is wrong with this thing
Perhaps the PDF files are corrupted.
Hit the command key and spacebar, a blue Spotlight in the upper right hand corner appears, now type Preview and press return on the Preview program.
Now you can try opening the PDF's from the file menu and see what's going on.
If they are corrupted, perhaps they are trojans from your Windows PC or gotten from a bad location online.
Download the free ClamXav and run a scan on the possibly infected folder. -
I am unable to update any add-ons at all. Every time I try and install an add-on or even the new "show hidden add-ons" add-on, I get a server error. How do I fix this?
You may have triggered some intermittent database issues but it should be running smooth by now. Let us know if you still see server errors.
Also, if your addons appear to go missing after updating there is a workaround http://blog.mozilla.com/addons/2011/09/28/issue-discovered-with-firefox-add-on-upgrades/ And there is a 7.0.1 fix on its way.
Maybe you are looking for
-
Error Rounding Difference too high when reset cleared document using FBRA
My Client has posted cleared document with T_Code F-51. This cleared document has cleared 6040 open items. And now, they want to reset and reverse that cleared document. We found error "Rounding difference too high" when we are reset cleared document
-
How do i connect a dell monitor u2715h to my macbook pro late 2013?
How do I connect a Dell monitor U2715H to my MacBook Pro. The only drivers provided are for Windows.
-
How do i find the internet MAC address for my MBP?
I am trying to get my MBP integrated into my home wireless network. Need to enter MAC address.
-
Embedded Form within a Task Definition
Why would I ever want to use an embedded form within a task definition instead of calling a manual action within my workflow? What are the advantages/disadvantages?
-
How to add list-elements for DropDownListBox
Hi It would be of great help if anybody suggests any proper reference material to go through the method of Adding list-elements for DropDownBoxList. I tried searching in BusinessCenter but in vain.