My ipod touch is not installing the driver in order to work on my computer. It is Windows 7

Trying to connect new ipod to Windows 7. Message keeps coming up saying driver installation failed. I have tried to troubleshoot but seem to be getting nowhere! When I find a similar issue in a search, the support page on the Apple website can not be found. Not sure what to do now?
I have updated computer, itunes and the ipod etc

See
iOS: Device not recognized in iTunes for Windows
- I would start with
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
- Then do the other actions of:
iOS: Device not recognized in iTunes for Windows
paying special attention to item #5
- New cable and different USB port
- Run this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
Also see:
iPod not recognised by windows iTunes
Troubleshooting issues with iTunes for Windows updates
- Try on another computer to help determine if computer or iPod problem

Similar Messages

  • I have an ipod touch 4th gen, installed the latest update to iOS 6 and have lost all my music. Where did it go?

    I have an ipod touch 4th gen, installed the latest update to iOS 6 and have lost all my music, apps etc. It also linked up with an alternate email address???? Help!

    I have a similar issue happenning with my ipod touch 64GB running IOS 6.0.1.  My music content is stored via itunes on my Snow Leopard macbook pro as well (and not in the cloud).  The music on my ipod (which is sync'd to my macbook pro when I connect via usb) has randomly disappeared about 3 or 4 times lately, not during sync'ing and unrelated to battery charge levels. Fortunately I have been able to restore it by restarting my macbook pro then re-syncing the ipod, which it is now doing as I write, but it takes hours (for over 3000 songs).  Having looked at a few other forum discussion pages, it seems this may be a bug related to IOS 6 updates and using music/itunes and podcast playing apps. The same thing has intermittently occurred with some other content such as downloaded podcasts, iplayer content and photos. Once I reconnected the ipod it synced and apparently restored the content, but I can't understand why it lost it in the first place, and its very annoying. Lets hope the reinstalling works on my ipod tonight....up to 248 of 3326 songs syncing as I write....

  • My iPod touch is not playing the songs on the playlists in the correct order. Can anyone help?

    My ipod touch is not playing the songs on the playlist in the correct order.

    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store         

  • My ipod touch thats not copy the application, what will i do?

    my ipod touch thats not copy the application, what will i do????

    What actually are you trying to do? Where are you trying to copy it from? It is possible that the apps is not yet available for gen lower than iOS 5 like Find my Friends app.

  • It says "can not install the driver: could not find media for this driver"

    I am havin problem with sound in my Compaq presario V6406TU. When i try to install, it says  "can not install the driver: could not find media for this driver", how ever i get a beep for every error message.  In my device manager there is no UAA and in services.msc windows audio is started.
    I have tried almost everything on net but not able to solve this, plz help.

    vendor wrote:
    = No SB0220 support available? SO, IS THERE exactly a model numbered as SB0220 AT ALL?
    I think there is not.
    Yes My Sound Card is exaclty SB0220. I have downloaded the patch and start it. After that I configured the installer and now I have creative drivers. But are they the best for my sound card? After all I`ve pathed the installer and some sort lied it. If the drivers are for my model, why should I path it's
    Yes, I've seen a true SB0220 too on a picture after writing that comment so there is true SB0220 model. But, are you sure your card is SB0220? Did you look the number from a sticker on card board w/ serial number lik MSB022xxxxxxxxxxx where the SB022x is the true model number for your card.
    Why you didn't got drivers installed for your card is, because the installer doesn't support the model SB0220 (supported cards are listed in ctcomp.dat -> this is the file ctcomp.exe patches).
    IIrc, those drivers are the latest ones for your card. If you like to, you can try soft-mod your card the way, you can use Audigy series drivers (which are a bit newer) -> http://www.tech-pc.co.uk/audigy-2.php (i.e. you just use ctcomp.exe utility to patch the installer for Audigy drivers (use these drivers st - http://www.station-drivers.com/telechargement/creative/%20audigy%205.2.0.042.exe) (newer installer maybe can't be patched w/ ctcomp).
    jutapa

  • HELP!!! My ipod touch 4th generation is not charging! The cable that came with the ipod touch is not charging the itouch, I have to use an iphone 3's cable to charge. What should I do?!?!

    HELP!!! My ipod touch 4th generation is not charging! The cable that came with the ipod touch is not charging the itouch, I have to use an iphone 3's cable to charge. What should I do?!?!

    Get a replacement cable. If still under warranty, Apple will replace the cable.

  • My ipod touch is not recognized by itunes or as a device on my computer even though it is connected

    ipod touch is not recognized in itunes or as a device on my computer, it worked a few days ago

    Do you have another USB cord you could try?

  • I purchased Lightroom from B&H Photo a few months ago.  I did not instal the software, because I was purchasing a new computer in the near future.  I am now purchasing that computer, but cannot find the software.  B&H suggested that I contact you directly

    I purchased Lightroom from B&H Photo a few months ago.  I did not instal the software, because I was purchasing a new computer in the near future.  I am now purchasing that computer, but cannot find the software.  B&H suggested that I contact you directly to help me.  I have the receipt, and you can look to see that the program was never used.  It would be great if you could just send me another copy of the software.  Thank you very much.
    Marc

    Download from Adobe's website
    Win: Adobe - Lightroom : For Windows
    Mac: Adobe - Lightroom : For Macintosh
    Install then enter your serial number when prompted.
    I have the receipt, and you can look to see that the program was never used.
    The receipt is only of use to B&H. Adobe will have no record of it.
    If you quote an Adobe Lightroom serial number then Adobe can confirm if that serial number has ever been registered. That step should not be required at this stage though. Just install the software.

  • My iPod Touch won't install the 2.0 software

    my ipod touch tried to install 2.0 but kept saying it had to restore it to the original factory settings before continuing. I said ok but i've tried 5 times now and it keeps coming up with error 6 - could not be restored. My ipod won't turn on now and every time i try to connect it to itunes it comes up with another error message saying it can't do anything until it is finished restoring.
    HELP!

    Have you tried here:
    iPhone and iPod touch: Frozen and unresponsive

  • My ipod touch will not finish the software what can i do?

    I am trying to update the software in my ipod touch as requested by the system and the update has stopped in the middle.  What can I do?

    Close iTunes and disconnect the iPod and try again. If iTunes does not see the iPod or there is a problem. place the iPod in recovery mode and try again.  For recovery mode see:
    iPhone and iPod touch: Unable to update or restore

  • Ipod touch does not charge and sync/appear in Itunes or on my computer - But will charge when plugged into the mains?!

    Hi
    I have a IPod touch 32GB, but im having a few problems with it.
    When i plug it into the computer its doesn't charge or appear in ITunes and 'my computer'.  However when i plug it into the mains it charges!
    Any idea what's happening the my iPod?!   Any help to save my precious iPod would be very helpful!

    If the cable works from a wall charger, then I'd try a different USB port, verify your USB ports support USB 2.0 (may be a setting in BIOS), or try a different computer...
    For the last test, if the computer has iTunes installed, DO NOT SYNCH your iPod!!!

  • The world clock on my IPOD touch is not telling the correct time

    My IPOD touch world clock is not displaying the correct time and the edit feature is not working to change the time

    See:
    iOS: Wi-Fi or Bluetooth settings grayed out or dim
    If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
    Apple Retail Store - Genius Bar

  • HT1430 My 4th Gen iPod touch will not turn, doesnt charge, and i can't reset in computer because it says it is protected by a passcode, but i cant enter pass code because the screen stays black and won't even light up... What do I do

    My 4th gen iPod Touch has had a blank screen for about 3-4 weeks now, it will not turn on, sync, or charge. iTunes recognizes its plugged up, but i cant reset it because it says its passcode protected, but i cant enter passcode due to screen not lighting up or working. How do i fix this?

    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen
    If recovery mode does not work try DFU mode.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

  • Windows 8.1 will not install the driver for Officejet 6310 All-in-One

    Have downloaded the driver from the HP website, but it will not install. The download wizard "detected a problem with the driver software" but did not say how to resolve it. The option to download the software was still available, so I did that anyway. When attempting to execute from my hard-drive, extraction occurs, followed by a delay, and then a message that reads "This application has requested the Runtime to terminate it in an unusual way". This is in an error box headed "Microsoft Visual C++ Runtime Library".  Can anyone help please? 

    Hi AB-Comp,
    Welcome to the HP Forums! I understand that your are seeing the error The download wizard "detected a problem with the driver software". I am happy to help you with this issue! I have some questions for you:
    What Operating System are you using? Windows or Mac? What version?
    Can you make copies with the printer?
    How is the printer connected? Wireless, Ethernet, or USB?
    Is the power cable plugged into a surge protector or directly to the wall outlet?
    Hope to hear from you, and thank you for posting!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • TS1398 ipod touch does not save the password of the wifi

    my ipod touch 4g does not save my home wifi password but in my bussines it does please help

    Two things to try:
    If your router is set to hide its SSID (network name) then go into the router's administration and change this setting. For some reason, this can cause problems with iOS devices remembering the network password.  There's really no need to hide your network name, there are (or were) apps that could show you any and all Wi-Fi networks within range, even if they're hidden.
    If you're using WEP encryption, try using WPA2.  It is much more secure and seems to play nicer with iOS devices.

Maybe you are looking for

  • Problem in WAD (The requested query / does not exist on the current server)

    Dear Guru's When i execute a Web Application in WAD in the selection screen suppose if i give Key product  as 86000 then check and execute i get correct data. Then if i come to  backpage (Selection screen again using backspace) and change Key product

  • How to mute/delete startup sound in Mountain Lion?

    Is there a way to shut off/mute the startup sound in Mountain Lion without simply turning down all sounds?  For years I have used a third party pref pane called startup sound, but it has not been updated for OS 10.8.  Thanks.

  • Adapter Issue

    Hello All, we are not willing to replicate any documents from ECC to CRM. But when we replicate the document from ECC to CRM, We want it to comeback. we only have bulk subscription. if i change it to Inteliggent replication is getting stopped for som

  • Upgrading with a physical standby database in place

    Hi all I am planning to upgrade my database which is 11.2.0.1 (Windows 32 platform) to 11.2.0.3. It has a primary standby database. I only have 1 server for testing the primary database, so I am looking for some help. I was reading http://docs.oracle

  • AppBarButton.Label text not showing entirely (text wrapping not working)

    Hi, I'm having some issue with the AppBar and the AppBarButton's labels. I'm working on Universal App and testing on Windows Phone 8.1 Update 1 emulator. In this image you can clearly see the issue where I drawn the red arrows: The strangeness is tha