My iPod touch is not turning on its fully charged but it just shut off and won't work i connected it to my mac desktop and it still isn't
what do i do? do i go get it fixed or what?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
Similar Messages
-
my ipod touch would not go past the apple logo, it would just shut off. i held the power and home keys and connected to itunes but now its on the connect to itunes picture and shuts off on its own. even if i try and shut it off myself it won't. it only stays on for about 3-5 minutes:( please help!!!
When it shows the Connect to iTunes screen and you connect it to iTunes, have you tried restoring it?
This should solve your problem because the most common cause of your issue is a software glitch that is preventing your iPod from completing it's boot sequence. Restoring it will replace the software on the iPod with a fresh set so it can be used again. -
IPod touch will not turn on although fully charged. Only had it three days.
My iPod touch has been working fine until today. I updated the software about four hours ago fine but after a while it turned itself off and will not turn back on. Have charged it for an hour and still won't turn on and tried to connect to my PC via USB but it doesn't recognise there is a connection. Where do I go from here ? Back to the shop ?
Try to do this:
First press the Power On/Off button for two seconds, than press the Home button (keeping the Power one pressed) until the screen "blink" and reapears the Apple logo (don't worry about your informations, they will keep up) -
IPod touch will not turn on even after charging and holding buttons
iPod touch 4th gen will not turn on. I have charged it on computer into a USB port for hours. I have held the SleepWake button together with the Home button for 10 sec, 20 sec, 30 sec, and 40 sec. I have tried releasing the SleepWake button first. I have tried disconnecting it from computer then repeating the sequence of buttons. I have tried different USB ports. I have tried reconnecting the iTouch while holding the buttons. Nothing has worked. Any suggestions?
iOS: Not responding or does not turn on - http://support.apple.com/kb/TS3281
iTunes: Backing up, updating, and restoring iOS software - http://support.apple.com/kb/HT1414
iOS: Unable to update or restore - http://support.apple.com/kb/HT1808 - recovery mode (e.g., cannot connect to computer last used to sync device)
How to reset iPod - http://support.apple.com/kb/HT1320
http://www.apple.com/support/ipod/five_rs/ -
1st generation ipod touch will not turn on after being charged
1st generation ipod touch got a white screen and then after that when charged it will not turn on. Does anybody know what happened or how I can fix it.
That symptom is one of those covered here:
iPod touch: Hardware troubleshooting -
Hello,
I need help before i go to the apple store for help.
My problem is that I have an Ipod touch which it was working fine but now it will not boot all the way.
It will not show the red bar when is ready to be turn off or reboot when using both buttons to reset it it will only come to the apple logo then goes blank.
I tried to restore via Itunes but same result, it will start showing is doing the extract then it will go blank and get a message saying that It can not find the device.
What do i need to do.
Thank you for your help.
regards,
Mario
PS. The OS I am not sure do not remember exactly.- Reboot the computer
- Try another USB port
- Try another cable try another cable
- Inspect the dock connector for bend or missing contacts, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
My ipod touch will not turn on at all.
For some reason, my ipod touch will not turn on at all. It has no water damage, and for whatever reason, iTunes does not recognize it at all, and it will not turn on. I have even tried resetting it by holding the sleep button and home screen. How can I fix this?
Try the Will not power on troubleshooting included in this article:
http://support.apple.com/kb/TS2771 -
So one day is was laying next to my ipod touch and i tried to turn it on but it wouldnt. so then i pluged it up to my computer to charge but it didnt charge, the computer didnt pick up the divice. so now my ipod touch will not turn on, and i have no idea why. PLEASE HELP.
mine did the same thing. What I did was hold the home and power button down for 10 seconds but that did not work. I figured out that I just had to hold them down for a long time like 15 to 45 seconds. Then it finally turned on. You may have to do it a couple of time. But if this does not work send it in to the apple company they fixed mine completly free they even sent me a box to send it in. I hope my answer helps you fix it.
-
Ipod Touch will not turn on, recognize itunes and fully function.
My Ipod Touch will not turn on, recognize itunes and fully function. When it does, once in a blue moon, after 5 minutes it freezes. I am wondering if its becuase battery was left dead for 2 weeks or problems with the iOS. Resetting does not help.
Any help will be greatly appreciated.Hi,
Try a Reset
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
The Apple logo will Appear and then Disappear...
Usually takes about 10 - 15 Seconds...
Turn the iPod On...
If that does not help... See Here:
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414 -
My ipod touch is not turning on, even if i plug it in to the charger. I'am wanting to rest the passcode through my computer in hopes it will turn back on. So far nothing is working what should I do?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
IPod Touch 4G Not Turning On or Connecting to iTunes
I have no idea why, but my iPod Touch will not turn on. When I press the Home button, it will show the low power screen (but only when connected to a USB cable). Holding Home does nothing. Holding Home and whatever the button on the top is results in a brief white flash, then it goes completely black. It won't show up in iTunes, and I've tried everything I can find on Apple's Support pages. I've tried plugging the iPod in both before and after starting up iTunes, I've tried holding the Home button down before plugging it into the USB cable, and I've tried changing where the USB cable is plugged into the computer (despite it being the same port I've used for the past four months, with no real problems).
I'm not sure what, if anything, else I can do, but any help would be greatly appreciated.I'd tried soft-resetting several times (had a similar thing happen before, and that always worked). Don't know why, but I tried holding the Home button while plugging in the USB cable today (had tried it yesterday, with no luck, but I figured why not try again) and it seems to have worked. Read in another post about it shutting off for about 24 hours because of processor overload, but since I usually don't have more than one app running at a time, even in the background, I didn't think that could be it. Clearly I was wrong. Thanks for the assistance, though.
-
Ipod touch will not turn on unless plugged in
My Ipod touch will not turn on, Ive plugged it in and it comes on it has a charge but as soon as I unplug it it goes black ... I have tried to restart it but there is just a black screen
Try the following:
- A reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory settings/new iPod.
If you still have the problem that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order -
Ipod touch will not turn on, have tried to reset any other ideas?
My ipod touch will not turn on, I have followed the apple fault finding and it will not reset either. Any other ideas?
Try to connect in recovery mode, explained here: iPhone and iPod touch: Unable to restore
-
Ipod touch will not turn on and is not reading in the usb port
ipod touch will not turn on or connect to my computer
I just had a similar problem and tried all of the reboot techniques with no success. I knew it had to be a connection issue inside the iPod, and grasping at straws, I sprayed a little WD-40. I dried it off and let it sit overnight. Today at lunch I plugged it in to my wall charger and it began charging.
***FYI I know they don't recommend spraying WD-40 on your iPod, but it was a last resort for me. I was at the point of paying to send it in for repairs or throwing it away. I wouldn't try this unless you are ready to throw yours away too. -
My 4th generation ipod touch is not turning off when i hold the wake button for few seconds the Voice Control Function Starts Automatically.Please help me to get out of this problem.
Sorry i mistakenly made this question. It was alright. No Problem At ALL
Maybe you are looking for
-
Initial load of sales orders from R3 to CRM without statuses
1) Some sales orders were uploaded into CRM without statuses in the headers or line items. 2) Some sales orders were uploaded without status, ship-to, sold-to, payer.....If I deleted them and use R3AR2, R3AR4 to upload each individual then no proble
-
Importing MS Project file to CProjects
hi all, <b>how to import a MS Project file to CProjects.</b> please help me from scratch.... send any doc on that on [email protected] [email protected] full points all be awarded.. regards, niranjan
-
Hi I am trying to provide a tree view for a list of menu. When i was exploring, I came to know about a tag which uses as below. <%@ taglib uri="http://java.sun.com/jsf/demo/components" prefix="d" %>What jar file should I include in my lib? Is it poss
-
Hi, In our environment, we have two nodes in a cluster with Content services runnin on both the cluster nodes. One of the process, which is configured to have watched folder end point. This process reads the document from watched folder and
-
Hi.. i have running cisco vWLC controller in my location A, its working perfectly here. Now i have another location B where i have APs registered with controller in location A. I have created another WLAN and set location B dhcp server assign locatio