My ipod touch is showing a usb pointing to the itunes logo on the screen and nothing else. It won't switch on beyond that. Please help!
my ipod touch is showing a usb pointing to the itunes logo on the screen and nothing else. It won't switch on beyond that. Please help!
Sounds like your iPod is in restore mode. Connect it to iTunes. iTunes will pop a little message up saying that your iPod is in restore mode and asking you if you want to restore it, click yes. Your iPod will restore to factory settings and you will be given the chance to restore from a backup. You can do this or set it up as a new iPod.
Here is Apple's page on restoring your iPod.
http://support.apple.com/kb/ht1414
Hope that helps.
Similar Messages
-
Hi everyone! I tried to install the new iOs 7 on my iphone 4, but it wasn't completed (showing error 4005). Now, my iphone is stuck on the itunes' logo with the usb cord, and I can't use my phone. And itunes doesn't detect my iphone when I connect it on my computer, so I can't put it in recovery mode or someting like that... What can I do?? I tried everything they tell me to do in the apple support but nothing seems to work. Thank you!
No problem, glad to help!
Update: my PC USB hub was connected to a USB 3 port, I connected the 30 pin cable directly to my PC, And the restore worked just fine. Restored phone from iCloud backup and seems to be working fine. -
iphone is frozen. the screen only shows the usb plug icon, the word itunes and the itunes logo. the whole phone is frozen
Connect it to your computer and open iTunes, it will probably prompt you to restore it.
-
I downloaded IOS 7 but my iPad is solid black! It wont show the apple or charging sign! It only shows a usb cable with an iTune logo but that is it! PLEASE HELP ME!!!!!!!!!!!!!!!!
You are in Recovery Mode. Follow the instructions below to recover your iPad.
http://support.apple.com/kb/ht4097 -
Tried to upgrading ipad 1 from itunes and l guess it did not complete the process because all I have showing on the ipad is the itunes logo with the usb cable. When l try to connect it to my system, it resquest that a driver be used to install the device. Please help! How do I restore?
Restoration is relatively simplistic. Here's whatcha do. Plug your ipad in, open itunes, now if itunes doesn't recognize it then you may have a problem, anywho, click on the ipad in the devices interface and go to the info tab, click restore, and it'll be just like it was when it left the factory. To get you data back, it should ask if you would like to use a backup, just select the backup you want and you'll be good to go. That is if you regularly backed up your iPad.
-
when I try to turn on my ipod touch I get a picture of a cracked apple and then a picture of a cable arrowed to the iTunes logo. I cannot do anything else. My computer now doesn't recognize the ipod and it looks like I lost all music and pictures. help!
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings -
i tryed to update my iphone and now my phone screen show the itunes logo with a wire and won't turn on, i tryed to update my iphone and now my phone screen show the itunes logo with a wire and won't turn on
Did you try to connect in recovery mode to your computer, explained in this article?
iOS: Unable to update or restore -
After adding the latest update to my 5c iphone, the screen was black, with the itune logo in the center, a white arrow below it point to the logo, and below that, what seemed to be a white lock, but it had a long white line reaching the bottom of the screen. I can't get the phone to start. The white apple appears and then I get the same logo, arrow, etc. What can I do to fix this? Thanks for any assistance.
i m also put passcode in my iphone...but i dont know that how i know that my passcode is crack by someone???and same as police is not interested to find out it..
i want ma iphone backkk........... -
I can't open my ipad now. It is stuck with the picture of the usb cord and the itunes logo on the front.
Recovery Mode
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: Data will be lost. You may have to repeat the above many times. -
My Iphone 5 suddenly turned off and there is only the Itunes logo with the usb image and arrow key. I've now connected to Itunes but it doesn't work
Have a look through this Doc
http://support.apple.com/kb/TS3281 -
my will not do anything and it has a picture of the usb cable and the itunes logo on the screen
Your iPhone is telling you you need to restore it using iTunes on a computer. Follow the instructions below.
Use iTunes to restore your iOS device to factory settings - Apple Support -
i reset my iPhone 3gs by erase all data and settings. After the process i was waiting till morning but its still shows the apple logo.its been 8 hours but i don't know what to do? please help me to fix it.
Something has gone wrong. Force the phone into recovery mode, as described here, & restore it:
http://support.apple.com/kb/ht1808 -
HT4623 i updated my iphone but my screen now displays the itunes logo with the usb cable
i updated my iphone but my screen now displays the itunes logo with the usb cable
Recent photos may be in your Photo Stream or in your iCloud backup if you chose to enable those backups.
If you were only backing up through iTunes and didn't complete a backup recently, then your photos are gone.
~Lyssa -
In need of some help, my Ipad turned off two days ago. I pushed the home button and the start to reset. Now it shows the Itunes logo with the connecter cord and an arrow. I plugged it into my PC, and there was an update for my Ipad. Waited the three hours for the update and disconnected hoping that everything was fixed. Would not turn on again so held the start/home and it still shows the Itunes logo, and when I plug it into my PC, Itunes will no longer open. I live three hours away from the nearest Apple store and would like to get it fixed at home if possible.
Did you expect iTunes to start automatically or did you start it yourself? Start iTunes and then connect the iPad.
-
My Apple TV is just showing the apple logo on my screen and light just flash on the Apple TV box
Welcome to the Apple Community.
Which Apple TV do you have.
Maybe you are looking for
-
ASA-5505 failover, cant choose interface
Hi I am trying to configure two ASA-5505 as a failover pair. Software 8.2.5 and ASDM 6.4.5.206 Using the wizard i get to step3 .. then nothing happenes. Trying direct in asdm but the only interface i can choose is "--None Unnamed-" How do i get any f
-
EH&S does not appear in SAP Menu
Hello, I'm sure this is an easy question for everyone. Our sandbox client does not show the EH&S menu choices under Logistics or HR. I can execute them using the transaction codes though. Is there a switch somewhere that needs to be set in order f
-
Am I correct in assuming BT no longer supplies a separate open reach modem. That is very inconvenient if true as when my one dies a natural death we are forced to use their hub instead of our own superior routers. Can the latest hubs be used in modem
-
How to import a .mdb file to oracle 10g
Hi friend, I ve a .mdb file i want to import it in oracle 10g how shud i do..please help me.. Sonal...
-
Please can anyone help solve this problem I need my contacts on a daily basis. Thank you Ross Hugo