My ipod touch is stuck in repair mode how do i fix it?
my ipod is stuck in repair mode, how do i fix it?
Hi,
Tap twice with 3 fingers. Then go to Settings>General and scroll down to Accessibility and turn Zoom off.
Ben
Similar Messages
-
My iPod touch is stuck in recovery mode and my lock button is broken what do I do
My iPod touch is stuck in recovery mode and my lock button is broken what do I do?
What happens when you connect to computer and restore via iTunes?
iTunes: Restoring iOS software
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
My iPod Touch is stuck in DFU Mode
Hi,
My Third Generation iPod Touch is stuck in DFU Mode (Completely Black Screen) and I cannot exit it as I have a broken Sleep/Wake button on the iPod. Even worse, iTunes will not see the device so I can restore it.
The only thing that I can think of is to wait until it's battery has completely drained and then restore it.
Please help me!Try placing the iPod in recovery mode using one of these programs and then restoring:
For PC
RecBoot: Easy Way to Put iPhone into Recovery Mode
or
http://joshuabailey1997.wordpress.com/2010/09/02/recboot-v1-3/
If necessary:
Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
and
RecBoot tip
RecBoot may have problems on 64X windows, then try:
Tenorshare ReiBoot – Enter & Exit iPhone, iPad, iPod Recovery Mode with a Single Click
For MAC or PC
The Firmware Umbrella - TinyUmbrella
Installs blootware on PC too -
Ipod touch is stuck in recovery mode with a error code 9
my ipod touch is stuck in recovery mode and when i try to restore it getting an error code 9
Error 9: This error occurs when the device unexpectedly drops off the USB bus and communication stops. This can occur if the device is manually disconnected during the restore process. This issue can be resolved by performing USB isolation troubleshooting, using a different USB dock-connector cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software.
From:
http://support.apple.com/kb/TS3694 -
my ipod touch is stuck in recovery mode... how do i fix this.. my itunes has the latest version
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
My iPod touch is stuck in recovery mode, but when I connect it to my computer to restore it, my computer does not recognize it. It does not appear as a device in my iTunes. What can I do to restore it/make my computer recognize it?
DId it successfully connect to this computer before?
Try:
iOS: Device not recognized in iTunes for Windows
or
V
Also try placing the iPod in DFU mode and then try restoring
iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X -
My iPod touch is stuck in recovery mode and won't restore?
Okay my Ipod Touch is stuck in recovery mode and will not restore because "the ipod software update server cannot be contacted". I have tried to restart my computer, restart my ipod, tried different computers, and re-intalled AND updated my itunes and it still will not restore. It is stuck on the picture of the usb cable pointing to itunes and won't do anything else. I'm trying to restore it because my memory was full and I wanted to clean it out and now the ipod is useless, please help me restore it!
Update Server
Try:
- Powering off and then back on your router.
- iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
- Change the DNS to either Google's or Open DNS servers
Public DNS — Google Developers
OpenDNS IP Addresses
- For one user uninstalling/reinstalling iTunes resolved the problem
- Try on another computer/network
- Wait if it is an Apple problem -
IPod touch 4G stuck in recovery mode- it won't even go into DFU
When I accidentally disconnected my iPod touch 4G during an update yesterday, it automatically went into recovery mode (the screen with the USB cable pointing up towards an iTunes logo). Now it won't turn off, it is recognised by neither my laptop nor by iTunes, it won't even go into DFU, so there's absolutely no way, as far as I can tell, to fix it. I've looked all over the internet, and the only other person I can find who has experienced a similar problem hasn't received an answer in about a year. (https://discussions.apple.com/message/17278012?searchText=iPod%20touch%204G%20st uck%20in%20recovery%20mode-%20won't%20even%20go%20into%20DFU#17278012https://dis cussions.apple.com/message/17278012?searchText=iPod%20touch%204G%20stuck%20in%20 recovery%20mode-%20won't%20even%20go%20into%20DFU#17278012)
/message/17278012?searchText=iPod touch 4G stuck in recovery mode- won't even go into DFU#17278012https://discussions.apple.com/message/17278012?searchText=iPod touch 4G stuck in recovery mode- won't even go into DFU#17278012This is the first time I've had any issues like this, and my iPod isn't jailbroken, so I don't see why it should have happened at all, but its really driving me round the bend. Any help would be much appreciated.Did you try the bold
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
My iPod touch home button doesn't work how can I fix it
My iPod touches home button doesn't work how can I fix it and how much will it cost if I get apple to fix it ?
See:
fix for Home button
Fix a broken, unresponsive or sticky iPhone Home Button
Apple will only exchange the iPod for a refurbished one for:
Apple - Support - iPod - Repair pricing
Try a third-party place like the following.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Use the Assistive Touch Accessibility feature if you have iOS 5. -
my i phone stuck in recover mode how can i fix it it keep showing up 1015 an different numbers
Hi there,
I would recommend taking a look at the troubleshooting steps found in the article below.
iOS: Unable to update or restore
http://support.apple.com/kb/ht1808
-Griff W. -
I have a ipod touch 2nd gen has white screen how do i fix this?
my ipod touch 2nd gen has white screen how do i fix this?
try to reboot your ipod, to do this hold the power button for 5 seconds, continue to hold the power button and press the home button for 10 seconds (at about 8 seconds the ipod will turn off ignore that) after that realease the buttons and your ipod should return to normal. (this working on my ipod 4g when it went green screen) hope it works!!
-
Hello there! I just recently tried updating my 32G ipod touch. Low and behold it incurs a problem and my ipod is now stuck in recovery mode. Is there anyway I can retrieve the music and photographs. PLEASE HELP!
This program may geit out of recovery mode. However, if something went wrong with te iOS and it went inot recovery mode then it might not be able to get it out of recovery mode. When in recovery mode the data is not accessable.
RecBoot: Easy Way to Put iPhone into Recovery Mode | Jaxov -
Ipod touch (2G) stuck in "restore" mode. Need HELP please
I have contacted Apple support several times since Friday and was just hung up on by an extremely rude lady in customer support. I am really frustrated and just trying to get my 5 yr old little boys ipod touch working again.
The situation is that our son's old computer crashed. So we have a newer computer set up for him. Reinstalled itunes on it. Called Apple on Friday, really nice rep gave me several instructions for transfering purchases, making sure everything was up to date and turning home sharing on. Did all that, got off the phone with him and then the computer tells me that the ipod needs and update.
Clicked ok, and update starts going for a few minutes.....then get an error message that says that the ipod is basically stuck in "restore" mode and needs to be reset to factory settings. It won't let me do anything to the ipod. It won't restore, reset, anything. Just shows a picture of usb cable and says to connect to itunes.
Connect to itunes and it keeps giving me say error message.
Will someone please help me? Apple support sure won't.Did you try to connect in recovery mode, to start the restore process again? Connecting in Recovery mode is explained here: http://support.apple.com/kb/HT1808
Also delete the ipod ipsw firmware file on your computer, to make iTunes download a new copy to restore from. Depending on your OS, this file can be found here:
XP: C:\Documents and Settings\[username]\Application Data\Apple Computer\iTunes\iPod Software Updates
Vista and 7: C:\Users\[username]\AppData\Roaming\Apple Computer\iTunes\iPod Software Updates
If you're getting error numbers, take a look at this article: http://support.apple.com/kb/TS1275 -
IPod touch 5g stuck in recovery mode.
Hi.
I tried to update the software on my ipod touch 5g, for some reason the connection was lost between the ipod and the PC midway through installing the software on the ipod, now im stuck in recovery mode.
I keep losing connection between ipod and pc since trying to update the software. Basically the connection is lost then comes straight back.
My ipod shows the lead with an arrow pointing towards the itunes logo.
Itunes tells me that im in recovery mode and gives me an option to restore.
Whenever I have tried to restore it downloads the latest software then nothing happens, just stays in restore mode.
I have tried putting it into DFU mode but nothing appears to happen after following the steps.
Really annoying as the next available appointment at the Apple store is on Monday and would like to get it fixed a lot sooner than that if poosible.
Many ThanksMaybe:
Restore loop (being prompted to restore again after a restore successfully completes)
Troubleshoot your USB connection. If the issue persists, out-of-date or incorrectly configured third-party security software may be causing this issue. Please follow Troubleshooting security software issues. .
Next try placing in DFU mode and then restoring.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
Try another cable
Then try restoring on another computer.
Last, make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
TS2771 my ipod touch home button does not work how do i fix this?
my ipod home button does not work. How do i fix this?
Try:
http://snapguide.com/guides/calibrate-your-home-button/?utm_expid=69945963-15
fix for Home button
iPhone Home Button Not Working or Unresponsive? Try This Fix
- If you have iOS 5 and later you can turn on Assistive Touch it add the Home and other buttons to the iPods screen. Settings>General>Accessibility>Assistive Touch
- If not under warranty Apple will exchange your iPod for a refurbished one for:
Apple - Support - iPod - Repair pricing
You can do it an an Apple store by:
Apple Retail Store - Genius Bar
or sent it in to Apple. See:
Apple - Support - iPod - Service FAQ
- There are third-party places like the following that will repair the Home button. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Maybe you are looking for
-
I have 2 Itunes libraries on 2 different computers and would like to switch one to become the other in order to have one complete library on both computers. Can I simply deauthorize and reauthorize the computer i want changed with the other library.
-
Replication of CUSTOMER from ECC to CRM
Hi CRM Guru Is that anyway to download the partner function (sold-to, ship-to, payer, bill-to, employee) in the customer sales area data from ECC to CRM (created as BP relationship in CRM) in the INITIAL LOAD? For example: Customer in ECC 100000000 h
-
Drill down in cross tab report.
Is it possible to have drill down in a cross tab report. e.g. in first view the main groups are the rows and when clicked on the main group the same design but with sub groups as the rows get visible as a drill down. If it is possible then which vers
-
Hello, I am new to PCs I and I can't figure out how to install a font. I unforunatly can't find the font mangement software on my machine or even if that exsists with this OS. Can anyone help me? Thanks in advance.
-
Asynchronous web services support?
Hi all Please advice is async web service calls are supported in siebel crm on demand. Is web services are configurable through admin interface to support asynchronous? Thank you.