My ipod touch just stopped working

My Ipod 4th generation just stopped working - not turning on

Basics from the manual are restart, reset, restore:
iPod touch User Guide (For iOS 4.3 Software)

Similar Messages

  • My ipod touch just stop working the screen is blue I cannot re-set it but the time is correct and it keeps up-dating

    My IPOD Touch just stop working - I was listening to music and it stop.  I cannot power it down or re-start it.  The time is correct and that is I can see at the top of the screen of the IPOD along with the battery info

    Try resetting:
    Hold both the home and power buttons at the same time until the Apple boot logo appears. No data will be lost.

  • My ipod touch just stopped working! how do you restore?

    I was playing a game and my ipod touch just stopped working!  How do you restore it , as of now it has a bright white screen and won't power off or even connect to my computer.

    Try restoring via iTunes. If necessary. try placing the iPod in recovery mode using one of these programs and then restore:
    For PC
    RecBoot: Easy Way to Put iPhone into Recovery Mode
    If necessary:
    Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
    and                                           
    RecBoot tip
    RecBoot may have problems on 64X windows, then try:
    Tenorshare ReiBoot – Enter & Exit iPhone, iPad, iPod Recovery Mode with a Single ClickFor MAC or PC           
    The Firmware Umbrella - TinyUmbrella
    Installs blootware on PC too

  • My ipod touch just stopped working, help please :(

    hi, I need some help with my ipod touch. i was using it and it was working just fine and i locked the screen and walked away came back to use it and the screen wouldn't unlock and it wouldn't even turn on. i plugged it in just to see if it needed to be charged and the screen wouldnt even light up or say that it was charging. is there anything I can do to get it to work again? or am i looking at having to buy a new one? if anyone has suggestions i would really appreciate it.
    thanks so much,
    Lauren

    Try here:
    iPod touch: Hardware troubleshooting

  • MY IPOD TOUCH JUST STOPPED WORKING, I CANT POWER IT ON OR ANYTHING, MY IPOD TOUCH JUST STOPPED WORKING, I CANT POWER IT ON OR ANYTHING

    somebody help me!!!!!  i have had my ipod touch for less that 2 months and it stopped working.  it was working 20 minutes ago but now i cant turn it on or anything.  i tried to hold down the home button and the power button and nothing happens.  HELP PLEASE!!!!!!!

    yes dosent work anymore

  • My ipod touch just stopped working, it wont turn on/off or charge.

    I was checkin my ipod n it just  stopped...It doesnt turn on/off wont charge it doesnt do anything..Any suggestion on how to fix it please?

    Those symptoms are covered here:
    iPod touch: Hardware troubleshooting

  • HT201263 My iPod touch suddenly stopped working. It was fine, but when I went back the screen had gone black and I was unable to turn it on. It is now unresponsive and my computer does not recognize it when it is plugged in. What should I do?

    My iPod touch suddenly stopped working. It was fine earlier, but when I went back a few hours later, the screen had gone black and I was unable to turn it on. It is now unresponsive and my computer does not recognize it when it is plugged in. I thought it just needed to be charged but there seems to be a larger issue now. What should I do?

    Let your ipod die. Then when it is dead charge it adn turn it back on. After that it should be fine.

  • The voiceover on ipod touch has stopped working.  not sure how i managed to stop it.  Any ideas how I get it speaking again?

    The voiceover on my ipod touch has stopped working.  Not sure what i have done to stop it.  anyone any idea how i get it started again?

    Turn VoiceOver on or off: Go to Settings > General > Accessibility > VoiceOver. You can also set Triple-click Home to turn VoiceOver on or off. See “Triple-click Home” on page 129.
    copied from page 120, ipod touch user guide 5

  • Ipod touch has stopped working. the screen showes that it need to connect to power.

    ipod touch has stopped working. the screen showes that it need to connect to power.

    Hey there our3goldens,
    It sounds like you are unable to successfully boot your iPod Touch. I would recommend these steps specifically from the following article, named:
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    If the device remains unresponsive or does not turn on (or power on), reset your device.
    Let it charge for at least twenty minutes, then see if it starts normally.
    If there is no image on the screen, press the Sleep/Wake button to attempt to wake the device.
    If the screen displays a red battery icon, continue charging the device until the battery is fully charged. Learn more about charging iPhone and iPod touch, or iPad.
    If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes:
    Connect the device to your computer and open iTunes.
    If the device appears in iTunes, select and click Restore on the Summary pane. Learn more aboutrestoring iOS software.
    If the device doesn't appear in iTunes, try to force the device into recovery mode, and then restore it.
    If the above steps do not resolve the issue, contact Apple.
    Thank you for using Apple Support Communities.
    All the best,
    Sterling

  • My ipod nano just stopped working right after playing a song, any suggestions to get it back working?

    my ipod nano just stopped working right after playing a song, any suggestions to get it back working?

    Did the battery run out of power?  If not, try doing a Reset to "reboot" the iPod
    http://support.apple.com/kb/ht1320
    (A Reset does NOT erase the iPod.)

  • My  ipod classic just stopped working.  Will not turn on, will not do anything.  Black screen.  It is still under warranty.  What do I do to get it fixed or replaced?

    My ipod classis just stopped working.  It is still under warranty and I need to know where the warranty information is so I can get it fixed or replaced?

    If you have tried all of the suggestions mentioned under the appropriate section in this Apple support document, you may need to have your iPod serviced or replaced either by Apple or a third party service. 
    iPod won't turn on
    If the iPod is still under Apple's 1 year warranty against manufacturing defects, Apple may swap it out for you at no cost if they don't conclude the issue to be the result of abuse or accidental damage.  If you have an Apple Store nearby schedule an appointment with them and show them what you are experiencing.
    http://www.apple.com/retail/geniusbar/
    B-rock

  • My Ipod touch email stopped working after installing Update

    my Ipod touch email stopped working after installing the latest firmware update from Apple what should I do?

    Hi, jewlssch. 
    Thank you for visiting Apple Support Communities.
    If the Mail application will not launch, I would recommend processing any available updates on your Mac Pro and test launching Mail.  If the issue persists, process a reinstall of Mavericks.
    Reinstall OS X
    http://support.apple.com/kb/PH10763
    Make sure to backup all of your data prior to reinstalling OS X 10.9.
    Back up your Mac
    http://support.apple.com/kb/PH11371
    Cheers,
    Jason

  • I own an iPod touch which stopped working...what can I do?

    I own an iPod touch which stopped working and this being a quality team and prestige is that I have to be considered as disposable as so far I have not been able to repair and I am sorry I took some effort for me it . If your business is equally as good customer service and say I can do to solve the problem and my equipment is still functional. Thank you for your attention to this.

    Oredinarily, I would ask if it's still in warranty and, if so, recommend that you contact Apple.  However, you indicated that you attempted to repair the Touch yourself so I suspect that you have voided the warranty.  You might want to try Apple anyway and see what happens.

  • My iPod touch screen stopped working, how do i fix it?

    My iPod(4th generation) touch screen stopped working. Okay so it was fine earlier, my home button does not work so i have been using the assistive button for months, and until earlier today it got stuck, i tried to power it off but it doesn't let me slide to power it off, and it doesn't let me press anything on the assistive menu either, and i'm currently waiting for my ipod to die but it's taking forever since it's battery lasts forever! is there any other solutions you can give me?
    and i was wondering if my ipod has life insurance with apple so if something is wrong with the screen, can i take it for a new one? (my ipod is in very good conditions, not cracked or scratched, just the home button is an issue)
    thanks!

    Try restoring via iTunes. If necessary. try placing the iPod in recovery mode using one of these programs and then restore:
    For PC
    RecBoot: Easy Way to Put iPhone into Recovery Mode
    If necessary:
    Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
    and                                           
    RecBoot tip
    RecBoot may have problems on 64X windows, then try:
    Tenorshare ReiBoot – Enter & Exit iPhone, iPad, iPod Recovery Mode with a Single ClickFor MAC or PC           
    The Firmware Umbrella - TinyUmbrella
    Installs blootware on PC too

  • My ipod mini just stopped working

    my ipod just stopped working all of a sudden. ive tried charging it and connecting it to my computer but it just wont knock on.
    ipod mini   Windows 2000  

    william,
    See these.
    iPod won't turn on.
    iPod battery doesn't charge.

Maybe you are looking for

  • Assigning a login module to a Web Dynpro application

    Hi everybody, I would like a Web Dynpro application to use a custom login module for authentication. How can I do this? What I found is the Security Provider (in the Visual Administrator tool) where I can add a login module to the "form" authenticati

  • Why do I have 2.5GB of 'Other' ???

    Last week my 16GB nano went goofy. I use WinAMP as an interface. When I tried to eject it it said the device was being used by another process. I disconnected it and everything was gone. I followed the troubleshooting instructions and eventually had

  • Jdeveloper 11g + richfaces 3.3.0 (how to install)

    Hello, I try to install richfaces components inside Jdeveloper11g but something goes wrong.. From the http://www.jboss.org/jbossrichfaces/downloads/ i have downloaded the last version of UI components and extracted it on local disk... In Jdeveloper i

  • Reporting success or failure of labview command line build

    We've set up a nightly build for our project, using a batch file for compiling the C++ code in our project on Windows. Thanks to some other posts on this subject, we've gotten the command-line build to work in Labview 8.2. I'd like to add the Labview

  • Getting error while doing simple ejb

    gettting error like ....javax.naming.NoInitialContextException: Cannot instantiate class: while try to use simple ejb through cliant application