My ipod touch keeps on lagging out every time i open a app it laggs out and closes down my ipod is a 2nd gen 16GB updated to the latest version HELP
Hi every time i open a app it starts to lagg and then it closes the app and then i will open it again 5seconds later it will close down again (i do not have the thing where you can open up the apps that are running and close them down) thankyou and please help me
Tryy the following in order:
- Reset:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Restore the iPod from Backup
- Restore the iPod to factory defaults/new iPod.
Similar Messages
-
My Ipod touch plays music but every time I open an app that I have downloaded it closes immediately. This started happening after updating to the latest version of Ipod software.
Here's a couple things to try:
1. Reset the iPod by holding the sleep/wake button and home button at the same time for 10-15 seconds until the Apple logo appears on the screen.
2. Uninstall and reinstall one of your purchased apps. Sometimes this can rectify the issue.
3. Connect the iPod to iTunes and restore it. New system software usually resolves the issue. Make sure you sync before restoring because a restore removes the data from your iPod.
Hope one of these works for you! -
I keep receiving this error every time I open LR, "Lightroom encountered and error when reading from its preview cache and needs to quit" and the app won't open. It said LR would try and fix this error next time I opened it but the error remains. I tried uninstalled and installing the app and the error remains. I have windows 8. Can anyone please help???
Use Windows Explorer to open the folder containing your catalog. The normal location is Pictures\Lightroom. Locate a folder with the extension .lrdata and delete that folder. Then you should be able to start Lightroom again, and Lightroom will begin building and new previews folder. Do not delete anything else.
-
I've been having an issue with assistive touch, every time I open an app. the AT disappears the from the screen and I have to turn it off and ON again. Is there a way to fix this?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device. -
I updated to the latest version of Itunes and my Ipod touch froze up with a picture of a usb cable and the i tunes logo
Well the answer I gave you didn't solve the problem. Is the USB cable and the iTunes logo still on the iPod screen? You could start the "fixing process" by rebooting your computer, connect the iPod again, launch iTunes and see if anything happens.
This article may prove to be helpful. there are many steps that you can try to get the iPod running again.
http://support.apple.com/kb/ts1275
Message was edited by: Demo -
I'm having trouble with my Apple ID. I changed my email account, and recently (a month ago) and since I switched is requested every time I open any app to Apple ID password to the old email. How can I solve this? Could it be that my iPhone 4S is in sync with my Ipod???
If you updated your existing account then try logging out of it on the iPhone by tapping on the id in Settings > iTunes & App Stores and then log back in and see if that 'refreshes' the account on the iPhone. If you created a new account then any content that you purchased/downloaded via the old account will remain tied to that old account, and only that old account can download updates to its apps.
-
How do i fixed my problem with my ipad apps every time i open that apps it takes 10min. to play the games ant its getting LOST MODE and the ipad system is crashing
We are fellow users here on these user-to-user forums, you're not talking to iTunes Support nor Apple.
Have you tried closing all apps via the iPad's multitasking bar and then doing a soft-reset and seeing that helps ? To close all apps :
iOS 7: double-click the home button to open the taskbar, and then swipe or drag each app's screen from there up and off the top of the screen to close it, and click the home button to close the taskbar.
iOS 6 and below : from the home screen (i.e. not with any app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of each app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
Soft-reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot. -
Since update to iOS 7, every time I open an app a pop up message telling me to connect to iTunes to use push notifications comes up. EVERY TIME! How do I make it stop???
Do you use iTunes with your iPad and if so, have you tried syncing your iPad with iTunes since you updated the iOS?
-
I installed OX S Lion today but now my safari quits every time I open it. Any ideas why and how I can resolve?
Yes done that several times. Went online with with my service provider, O2. Spoke to a "Guru" sent me an E-Mail with the settings so I could put them in manually incase the reset did'nt work.
-
Device not recognized in iTunes for Windows
I wasted about 1.5 hours with Apple on this issue. It all started happening after I updated to the latest version of iTunes. I haven't been able to sync my iPhone 4 in 1 month and am freaking out about possibly losing my pictures, video, text messages and music.
Windows XP user.
Any help will be greatly appreciated.
iPhone 4, iOS 5.1.1If might be helpful if you actually told us what the problem is.
-
I have updated to the latest version of iTunes (11.2.2.3). However, when I connect my iPod it shows in My Computer and iTunes opens automatically when the iPod is connected but the device doesn't show in iTunes. Any ideas? I am on Windows 8.1 and my iPod is a Classic
Hi murr18140,
Welcome to the Support Communities! The article below will help you troubleshoot the issue you are having with your iPod classic not being recognized in iTunes for Windows:
iPod: Appears in Windows but not in iTunes
http://support.apple.com/kb/TS1363?viewlocale=en_US
I hope this information helps ....
- Judy -
Every time I open an app a box appears saying I need to connect to iTunes to receive push notifications. I go to iTunes and I'm already logged in,so I'm not sure what to do. Can anyone help?
Use Lion Recovery to repair the startup disk if necessary, or reinstall the Mac OS X.
-
every time i open an app it will close with in a few min and wont open at all if music is running in the backround. what can i do about this?
See:
iOS: Troubleshooting applications purchased from the App Store
Contact the developer/go to their support site if only one app.
Restore from backup. See:
iOS: How to back up
Restore to factory settings/new iPod -
Every time I open an app it reverts back to the icon screen
Every time I open an app it reverts back to the icon screen after a minute or so, sometimes almost immediately. Any ideas about what is going on? I have both wifi and 3G so I don't think it is an Internet problem. Thanks!
Try a hard reset first. Press and hold both the Sleep/Wake and Home buttons together long enough for the Apple logo to appear.
If still no luck, try downloading and installing a new app from the App Store. Doing so has cleared the issue up for several users.
B-rock -
Since updating to the latest version of iTunes, I have been unable to sync ANY of my devices (iPod
I recently updated to the latest version of iTunes. Since updating, iTunes does not recognize any of my devices (iPod or iPhone).
When I plug in my iPhone it doesn't even recognize that it is plugged into the computer (although the cord works and the USB port is good).
When I plug in my iPod (on the same cord) an error message pops up in iTunes and immediately kicks/ejects. "An iPod has been detected, but it could not be identified properly..."
Please help!Follow these instructions to completely remove Apple software
http://support.apple.com/kb/HT1923
Then use free Ccleaner to repeatly repair your registry until it's fixed.
http://www.piriform.com/ccleaner/download/standard
download iTunes again from Apple.
Your content will remain.
Maybe you are looking for
-
Creating Style Sheets for Existing Text
Can I get some advice on what would be the easiest way to create and apply style sheets to a document that was layed out w/o any? My Art Director layed out a dozen pages of actual type w/o any style sheets. It's a pretty basic layout with Headers, Su
-
How to make custom validator in jsf
hi i am using jsf for web designing in my projects.now we are using java script for JSF validation .but i am interested to do validation using validator tag of JSF.i have tried ,but it is not working.what can i do for this problem.can u give some sim
-
How to display stored image in jsp in ie7???
i am using internet explore7. i have a problem when i am displaying an image in jsp its not properly coming. this image and image is stored in database. image is stored in database using "binarystream" . i am just simply calling the image path and us
-
How to deal with Null Variables
AND (CONVERT(varchar, CAST(rtrim(SH.ship_dt) AS datetime), 101) = (CONVERT(varchar, (DATEADD(day, -1, GETDATE())), 101))) This part of my where clause results in a NULL causing my job to fail since it is setting an integer variable. Any tips? I've
-
Need Help with Rotating Banner ad(please help)
I am currently working on a flash project that rotates banners out auto and with button control, got the buttons to work just cant figure out how to get it auto play throgh my bannersThis is the code i have for my project I am working on: My Project