My ipod touch locks up and when i reset it it will not come back on.
my ipod touch locks up and when i reset it it will not come back on. when i plug it to my computer it wont come back on. it does this often and after a couple of days it will finally turn back on.
Have you tried restoring the iPod via itunes on your computer? First restore from backup and if problem persists restore to factory defaults/new iPod.
Similar Messages
-
HT1386 i update my phone to is06.01 and my music will not come back after i svnc
i have update my iphone 4s to is06.0.1 and after i sync my music will not come back has any one had this problem
Is the music in the iTunes library on your computer?
-
My Ipod Touch is disabled and when I connect to Itunes to recover it, it states that itiTunes could not connect to the iPod touch “iPod touch” because it is locked with a passcode. You must enter your passcode on the iPod touch before it can recover.
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Forgot passcode or device disabled
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode. -
i have an ipod touch 5th gen and when connected to itunes i get a message saying itunes was unable to load data class information from sync services. reconnect or try again later. anyone got any ideas? i've tried most things on most forums but still no joy
Try here:
iTunes for Windows: "Unable to load data class" or "Unable to load provider data" sync services alert
If not successful see the previous discussion on the right side of this page with the green checkmark. -
my ipod touch got stolen and when i got it back it said ipod disabled connect to iTunes how do i get my information from notes, contacts, etc. and apps on it back while restarting it through iTunes?
Connect the iOS device to your computer and restore via iTunes. Place the iOS device in Recovery Mode if necessary to allow the restore.
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see the following. This will get the iPod like it was when the backup was made. This is you only possible way of getting your information back since when the iPod is in recovery mode (the screen show conect to iTunes) the iPod is already erased.
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
hey.. i have a ipod touch 2 gen and when i try to connect to wifi it cant find it,
even though my laptop does so it not my router..
can anyone help me??Is this the problem:
iOS: Wi-Fi or Bluetooth settings grayed out or dim
Otherwise
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router.
- Reset networks settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- iOS: Recommended settings for Wi-Fi routers and access points
Not the the 2G can only see/connec to the b and g wifi bands. It does not see any n band networks. -
I have an ipod touch 4th generation and when i try to sign up for imessages or facetime it says that it is unable to verify email because it is already in use. How do I fix this???
If this is the problem following the instruction. Frequently it is a hardware problem.
iOS: Wi-Fi or Bluetooth settings grayed out or dim
Otherwise try (assuming that other devices see your network)
- A reset. Nothing wil be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power of and then back on your router.
- Reset network settings: Settings>Genral>Reset>Reset Network Settings
iOS: Troubleshooting Wi-Fi networks and connections -
I have an iPod touch, 3rd generation, and when I push the button to put it to sleep, my iPod takes a screen shot. It's really annoying. Is this a result from updating to iOS 4.3.3? Also, my screen is EXTREMELY sensitive—breathe on it and it turns on.
- Are you also having problems with the Home button? Maybe it is sticking a little since to take a screen shot you depress the Home and Power/Sleep buttons at the same time.
- I have not seen your problem discussed here before.
- I would first try resetting the iPod:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Next would be to restore the iPod via iTunes. First from backup and if problem persists, restore to factory defaults/new iPod. -
i have an old ipod touch 3rd generation and when ever i open it , it doesn't open or it turn blank, if i click on the home button and the power button to do the reboot it works but when i remove my finger it close. i can acced the ipod from the cpu but not from the actual device
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
I have a iPod touch 5 generation and I've reset my settings to it and I need help fixing it any help would be very helpful. If you know what's wrong with it please email [email protected]
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem. Other users have had the same problem.
Apple Retail Store - Genius Bar -
i reset my ipod touch 5th generation and i just reset my apple id and password and it wont let me activate my ipod. I need help!!
What happens when you try? Error message?
To activate you have to enter the ID and password last used for Settings>iCloud. In most cases the Apple ID is used for Settings>iCloud but not always.
If problems contact iTunes
Apple - Support - iTunes - Contact Us -
I just bought a new Retina Display macbook pro, and I plugged in my iPod touch (4th gen) into the new computer, but it will not show up, even after I typed in the passcode. How do I get my iTouch to sync with my new computer without restoring my itouch?
iOS: Device not recognized in iTunes for Mac OS X
-
My ipod shut off while i was using it and now will not come back on what do i do
My Ipod touch shut down while I was using it and will not come back on. Any suggestions on what I should do??
Have you tried holding the Home and Power buttons at the same time? You should let them go when the Apple logo appears.
-
My ipod touch 4th gen shows 3 bars of connectivity but will not load on internet-required apps
my ipod touch 4th gen shows 3 bars of connectivity but will not load on internet-required apps
Does the iOS device connect to other networks?
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
I have a ipod touch and it shut off and will not come back on. I have pluged it in and still get nothing what can i do?
Let it charge for an hour or two.
If it doesn't Coe back on, try a Reset.
Press and hold both the Sleep/Wake button and the Home button for at least ten seconds, until the Apple logo appears (ignore the Slide to Power Off option that shows up first).
Maybe you are looking for
-
Conversion of Sales Orders with Original ATP Confirmation Dates/ Quantities
Hi Please suggest best practice to maintain ATP confirmation dates/ quantities during sales order conversion. We have committed schedule lines in a legacy SAP system. Now we want to maintain the exact same dates/ quantities when loading these dates i
-
(internal) Tables obsolete as parameter in function modules,
Hi As you probably can see by the question, my ABAP Knowledge isn't exactly overwhelming ! <i>anyway:</i> I'm trying to create a function module in NW2004s, This functionmodule should take an internal table, based on a structure as (import) parameter
-
Windows Installer. The feature you are trying to use is on a network resource that is unavailable. Clock OK to try again, or enter an alternate path to a folder containing the installation packege 'AdbeRdr820_en_US.msi' in the box below. I can't find
-
Source indicator not updated after PO created from SOCO
Dear SAP gurus, We are using SRM 7 with EHP1 and ECC 6 as backend. We are using plan driven procurement, but as we're not using XI/PI we're using program BBP_EXTREQ to transfer PR from ECC to SRM. When the PR comes to SRM as SC, the source indicator
-
Hi, Is it possible using C3PO to intercept a message when it arrives in the SentItems folder? If not, is there a way to change some hidden property of the message before sending it and create an external program that keeps polling the SentItems for a