My ipod touch says its connected to wifi.

My email and safari google work. However every other app says I'm not connected. I've reset the network settings, forgot and retyped my wifi password, turned it all the way off and on. Other devices work with wifi, this is just this device.

Hi Marissa_Aleah,
The article below may be able to help you troubleshoot your Wi-Fi issue.
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/TS1398?viewlocale=en_US
I hope this information helps ....
Have a great day!
- Judy

Similar Messages

  • Ipod touch says its connected to wifi but wont work? Help!

    My ipod Touch 4th gen says its connected to wifi, but then wont work to any app involving wifi. We've had someone check out our Internet and our router and its fine. Every wifi needing device in the house works but not mine. Ive had my ipod for about 5 or 6 months and its never ever done this. it just stated not working yesterday. Thank you for all your help.

    Does the iOS device connect to other networks?
    Does the iOS device see the network?
    Any error messages?
    Do other devices now connect?
    Did the iOS device connect before?
    Try the following to rule out a software problem:                 
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • Ipod touch says its dissabled connect ti itunes but wont open up

    ipod touch says its dissabled connect to itunes but wont open up

    Try to connect in recovery mode, described here: http://support.apple.com/kb/HT1808

  • My ipod touch won't connect to wifi at home and it use to, it keeps saying my password is wrong

    My ipod touch won't connect to wifi at home, it use to work just fine, now it keeps telling me my password is wrong, but it can't be wrong because it is the same one I have always used. I also have an IPad2 that belongs to my daughter and it connects with our wifi at home with no problem.  But, why is my wifi telling me that my password is wrong.  I have tried everything, we have changed the pass word and that did not work.  We have have taken security off of our wifi and my ipod touch give me another message, but it won't connect to my wifi at home.  Please help... b/c the greatest thing for me is to be able to connect to wifi at home.
    thanks

    I have even shut down my ipod touch to see if it fixes the lack of wifi connection at home but it keeps telling me my password is wrong.  I can connect everywhere else, but not at home.  Pls help my.. I need to connect at home.  Does it matter if we have othere decives like ipads connected to the same wifi.  Because we have an ipad2 and my ipod and up until 1 week ago, we had very little issues keeping both of our devices connected at home.  Eitherway the ipad2 is still working just fine on our home wifi, but my ipod touch keeps refuseing to accept the password.
    Pls help, i am very frustrated and I have tried everything.

  • HT1212 i want to get my photos and this app that has my movies on it, but my ipod touch is locked and i forgot the passcode. normally i would have to restore my ipod but how do i keep my content if my ipod touch says its never been backed up?

    i want to get my photos and this app that has my movies on it, but my ipod touch is locked and i forgot the passcode. normally i would have to restore my ipod but how do i keep my content if my ipod touch says its never been backed up?

    If when you connect the iPod to your computer yu can't make a backup:
    - Contact a data recovery company
    - Maybe via How to perform iPad recovery for photos, videos
    Wondershare Dr.Fone for iOS: iPhone Data Recovery - Wondershare Official     

  • My Ipod touch says disabled connect to itunes I try and it says cannot connect it has a passcode that needs to be entered to connect but thats why I have to get into itunes because I can't get in my Ipod what do I do?

    My Ipod touch says disabled connect to itunes I try and it says cannot connect it has a passcode that needs to be entered to connect but thats why I have to get into itunes because I can't get in my Ipod what do I do?

    Place the iPod in Recovery mode and then connect to your computer and restore via iTunes.

  • My ipod touch says its disabled, and i tried restoring it but it doesnt work what can i do?

    my ipod touch says its disabled, and i tried restoring it but it doesnt work what can i do?

    See Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...
    Be sure to Follow ALL the Steps...

  • Trying to update apps my ipod touch says cannot connect to itunes store I have internet connection

    trying to update apps my ipod touch says cannot connect to itunes store

    What is "it" in but it is not connecting with the ipod ?

  • Brand New 5th Gen iPod Touch Won't Connect to Wifi

    I just got a brand new 5th gen iPod Touch and expected to have a fun night of playing with it, but instead I was trying to figure out why it won't connect to my network. Not a good introduction to a product.
    Here is the related info and troubleshooting steps I've already tried:
    - It will not connect to my wifi network
    - The iPod Touch says "Unable to join the network [network name]" when I try to connect to my network (as opposed to "Could not find the network [network name]" when it is not the correct network name)
    - I was able to connect to a random unsecure network nearby
    - Of course I power cycled my router and modem to reset them
    - My wireless router does not broadcast its SSID; I made it broadcast it and it still didn't connect
    - My network is password protected. I tried changing the security type, as well as turning the password off altogether, but nothing worked
    - My wireless router is a Netgear WGT624 v3
    - Even though it's brand new, I tried resetting the iPod Touch and the network settings
    Does anyone have any tips or solutions for this?
    I wasn't able to find other people with this problem, at least not with solutions that I haven't tried. It's really frustrating not being able to connect to the internet with my new device.
    I will point out that my Android phone connected to my wifi network on the first try with no problems.
    Thanks

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    iOS: How to back up your data and set up as a new device
    - Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar
    What security are yo using with the router?
    Try as a test setting the router security to None.

  • My iphone says its connected to wifi but its not working.

    my iphone has the icon on the top saying its connected but then its internet doesnt work'

    can someone help me pleaseee.....

  • My ipod touch 1st gen says its connected to wifi, but when i go on safari it stops at "connecting" with a grey screen, what should i do, my router is fine, cause my brothers iphone 4th gen works, but my ipod touch 1st gen dosen't?

    yes, so i connect to my wifi at home, my brothers iphone works fine, but my ipod touch 1st gen dosent conect. it connects but when i go on safari it dosent work, it says" connecting" with the circle loading thing. plz help< o and my router is fine because my brothers iphone works great, ive tried restoring and reseting networks, and ive also tried forgetting the network, my ipod touch 1st gen is out of its warranty, so what can i do?

    Try restarting your router by removing power to it for 30 seconds. This may correct the problem.

  • My ipod touch 4th generation says its connected to wifi but whenever i try to use wifi it says its not connected

    I have had my ipod touch 4th generation for a few years now and all of a sudden it wont connect to wifi. Even though it says im connected it doesn't work. It has a tick beside the name and everything! Also it has three bars saying im fully connected but whenever i go onto an app that requires wifi it says im not connected. I have reset my ipod, reset the settings, forgot the network then connected again, everything!!!! No matter what i cant get wifi for anything that i need it for.
    Please, Please, Please, Please can someone give me an answer that will work and if you do answer please tell me what an router is because everyones talking about it and i don't know what it is??!!!  
    PLEASE

    Does the iPod connect to other networks?
    Does the iPod see the network?
    Any error messages?
    Do other devices now connect?
    Did the iPod connect before?
    Try the following to rule out a software problem:                 
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • My iPod touch won't connect to wifi?

    I recently got an iPod touch 5th gen, and at first everything worked fine. Randomly, it stopped connecting to my home wifi network. Other devices (my brothers phone, my tablet) connect to it fine, but with my iPod it says it's connected and I have 3 bars of wifi, but Safari won't load any websites, none of my social media apps work, and it acts as if it has no wifi connection. It works perfectly fine at other wifi networks (I've tried it at school and at some public wifi locations), but it won't use my home wifi. I've tried turning the wifi off and back on, restarting my iPod (holding down power+home buttons), resetting network connections, tapping "forget this network" and joining it again, making sure that I am on the latest update of iOS, and nothing seems to work. I've tried setting the HTTP PROXY to "Atuo" because I read somewhere that it solves the problem, but everything is the same. I connect to the wifi and it works fine for like 1 minute, and then it just stops working. I don't get any error message or anything either. I don't think it's my router because like I said, all the other wireless devices in my house are able to connect just fine. If anyone could help me with this, that would be greatly appreciated. Thanks

    Does the iOS device connect to other networks?
    Does the iOS device see the network?
    Any error messages?
    Do other devices now connect?
    Did the iOS device connect before?
    Try the following to rule out a software problem:                 
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on your router
    .- Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network       
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • 2.2 Generation one Ipod touch having trouble connecting to wifi

    Ok, I am having a BIG issue with connecting my ipod touch to a linksys WRT54GX4 wireless router running WPA/WPA2 wireless security (there is an option that allows BOTH to be selected, but I disabled WPA2 as an option after I first started having issues with the IPOD touch wifi).
    Here are all the details.
    Bought the Ipod touch last December and while the firmware version was in the "1's", I had no issues connecting to the router and using the wifi functions.
    After the 2.0 upgrade, I had intermittent connection issues with the router. Sometimes, I could connect to the router easily and maintain a connection; however, the MAJORITY of the time, I would select the router from the wifi list, and receive a "Cannot connect to router" error. When I could connect, I would often lose my connection after a minute or two (regardless of using safari, youtube or the email client; all three would cause the connection to drop).
    Now, in 2.2, I STILL get issues connecting to the router with no seeming relief! I find that after I restart the router (power off for 30 seconds), I am able to connect, albeit with a slower connection, for a while. After I put the Ipod on "hold" after that first time, I start getting the problems I listed above with intermittent connectivity. Since I am not the only person in my household who uses my router wirelessly, powering off the router whenever I want to connect the IPOD is NOT an option!
    Here are connection logs from the router, annotated by me to show different attempts to connect. I hope these can help a technician resolve my problem:
    #These are my comments#
    Nov 25 21:24:35 (none) user.debug klogd: Register 0:1d:4f:ee:dc:d1:
    Nov 25 21:24:35 (none) user.warn klogd: <7>Add L2 =Fwd/Static/LinkId=1/Port=0040, ret=0,0
    Nov 25 21:24:35 (none) user.debug klogd: Register L2 entry to 865x, ret=0, <7> link id 1 mac on radio 0 00:1D:4F:EE:DC:D1
    #In the block above, I was able to connect the ipod after a power restart of the router. It connects for only a few seconds though#
    Nov 25 21:24:40 (none) user.debug klogd: Unregister 0:1d:4f:ee:dc:d1:
    Nov 25 21:24:40 (none) user.debug klogd: Modify L2 =DstBlock/Dynamic/LinkId=1, ret=0
    Nov 25 21:24:40 (none) user.debug klogd: Unregister L2 entry from 865x, ret=0
    Nov 25 21:24:40 (none) user.debug klogd: wns msg rcvd: type = 0x130a^Ilength = 30
    #Above, it apparently gets unregistered by the router after 5 seconds of connection! What's going on here!#
    Nov 25 21:24:43 (none) user.debug klogd: Register 0:1d:4f:ee:dc:d1:
    Nov 25 21:24:43 (none) user.warn klogd: <7>Add L2 =Fwd/Static/LinkId=1/Port=0040, ret=0,0
    Nov 25 21:24:43 (none) user.debug klogd: Register L2 entry to 865x, ret=0, <7> link id 1 mac on radio 0 00:1D:4F:EE:DC:D1
    Nov 25 21:24:43 (none) user.debug klogd: wns msg rcvd: type = 0x1308^Ilength = 46
    #Ok, tried to reconnect here, and got it to work for a minute#
    Nov 25 21:25:06 (none) user.warn klogd: [0][19][3][12196541] PEER not responding : STA 7 [0:1d:4f:ee:dc:d1] tx 36
    Nov 25 21:25:06 (none) user.warn klogd: [0][19][2][12196541] Triggering deletion, fail time 1001
    Nov 25 21:25:06 (none) user.debug klogd: Unregister 0:1d:4f:ee:dc:d1:
    Nov 25 21:25:06 (none) user.debug klogd: Modify L2 =DstBlock/Dynamic/LinkId=1, ret=0
    Nov 25 21:25:06 (none) user.debug klogd: Unregister L2 entry from 865x, ret=0
    Nov 25 21:25:06 (none) user.debug klogd: wns msg rcvd: type = 0x130a^Ilength = 30
    #Alright, the DISTANCE from the router is not an issue, as I'm 3 feet away from the router at this moment. However, the ipod is unresponsive here? What?#
    Nov 25 21:25:19 (none) user.debug klogd: Register 0:1d:4f:ee:dc:d1:
    Nov 25 21:25:19 (none) user.warn klogd: <7>Add L2 =Fwd/Static/LinkId=1/Port=0040, ret=0,0
    Nov 25 21:25:19 (none) user.debug klogd: Register L2 entry to 865x, ret=0, <7> link id 1 mac on radio 0 00:1D:4F:EE:DC:D1
    Nov 25 21:25:24 (none) user.debug klogd: Unregister 0:1d:4f:ee:dc:d1:
    Nov 25 21:25:24 (none) user.debug klogd: Modify L2 =DstBlock/Dynamic/LinkId=1, ret=0
    Nov 25 21:25:24 (none) user.debug klogd: Unregister L2 entry from 865x, ret=0
    Nov 25 21:25:24 (none) user.debug klogd: wns msg rcvd: type = 0x130a^Ilength = 30
    #Clicked on my router's SSID again to try to reconnect... denied...#
    Nov 25 21:25:26 (none) user.debug klogd: Register 0:1d:4f:ee:dc:d1:
    Nov 25 21:25:26 (none) user.warn klogd: <7>Add L2 =Fwd/Static/LinkId=1/Port=0040, ret=0,0
    Nov 25 21:25:26 (none) user.debug klogd: Register L2 entry to 865x, ret=0, <7> link id 1 mac on radio 0 00:1D:4F:EE:DC:D1
    Nov 25 21:25:32 (none) user.debug klogd: Unregister 0:1d:4f:ee:dc:d1:
    Nov 25 21:25:32 (none) user.debug klogd: Modify L2 =DstBlock/Dynamic/LinkId=1, ret=0
    Nov 25 21:25:32 (none) user.debug klogd: Unregister L2 entry from 865x, ret=0
    Nov 25 21:25:32 (none) user.debug klogd: wns msg rcvd: type = 0x130a^Ilength = 30
    #Same here#
    This is incredibly frustrating. Should I return the IPOD to an apple store and ask for a new one? Is there a setting on my router that will allow the IPOD to actually connect?
    Some more information:
    *Mac filtering is off.
    *Encryption algorithm is TKIP
    *Group renewal key is 3600 seconds
    *First installed firmware 2.0 OVER 1.4. After I got wifi issues, I restored the ipod to 2.0 after a full format. Did not solve my problems.
    Please help...

    I am so disappointed! The exact samething has happened to me, AND my husbands Touch. We had no problems before, and as you say with 2.1 a little stared - I ignored it because I love and defend my touch. After 2.2 all heck broke loose, I went to the genius bar and of course it ran perfect there. I had numerous screen shoots in one day, 'failed to connect to server, safari server, gmail server' - timed out blah blah blah, so they suggested I call my internet provider, they run a test and everything fine, they suggest I call the router people, ten bucks later and with nothing really showing a problem with the router our Touches still do not work like they used to. I am NOT buying a iphone, I want Apple to fix it or tell me how, it worked fine before what the heck gives, I wish someone could answer honestly.
    Thanks for letting me get that off my chest, I really hate to switch to Zune as my nephew has been bragging about.
    CC

  • IPod Touch will not connect to WiFi network

    Hi,
    I am getting errors connecting to WiFi networks with my iPod Touch. This had affected a Touch I got a couple months ago. Initially, the WiFi worked perfectly on my WEP network and several others. Then, one day, I couldn't get any WiFi. After standard troubleshooting steps (forget network & re-enter, reset network settings, restart, restore iPod, etc.), it still wouldn't work. I returned the iPod and bought another. At first it also worked perfectly on any WiFi network I joined.
    But now I'm affected by the same issue. This time, I went to the router settings and saw that the router (a Linksys) had assigned the iPod Touch an IP address. Yet, in the settings pane on th iPod Touch, the iPod had no IP address. I just ahead and reset all network settings, forget the network, reset the update and still nothing. And this was recently after updating to 1.1.2 firmware.
    Given that this has now happened to iPod Touches, I'm concerned that it may be an issue that is affecting others. Any suggestions? The error I get in Safari is "Safari can't open the page because it can't find the server."

    same problem!it connects to the linksys(not always,but miracles happen),and it can't load any page. it's really anoyingi. actually remember that the first day i bought it could've connect to linksys,but then my dad just helped me to acces our network and i didn'try to use it. but when i was in neighbourhood and wanted to open safari, it found me a link sys,but couldn't load anything. like nothing,even thou the signal was pretty strong...and i tried to do something like this in different places and buildings,the only place where i could actually connect is home with my network,that's it!
    i don't want to return my ipod,but it really drives me to it..=/
    is there anything that i can do?
    tnks.

Maybe you are looking for

  • ConfigureCombined invoice for Delivery and Order related billing items

    Dear Guru's, Please tell us what settings one have to do in copy controls (like for TAS "OR to F2" & TAN "LF to F2") as to Combined invoice for Delivery and Order related billing items. Regards, Sai

  • ADF Installtion on Weblogic

    Hi, I have installed ADF on Weblogic . But Customer has some questions regarding the installation . Please suggest me something on the questions from Customer here :- Q.1) Can that local inventory(OF ADF Oracle Product) be moved or can it exist in so

  • Need help sharing

    ive read other threads and cant seem to find what i am looking for. I have just installed the newest version of itunes, and i cant share. I have the prefrences to share, and my roomate can see my music but i cant see anybodys

  • Air Port and Wireless Router

    I have recently purchased a wireless router from netgear (model # wpn824) and I am unable to connect to it wirelessly. I can connect if I'm plugged directly into the router, but not using air port. Actually, I'm not able to open up my web browser (I

  • Error adding partner function

    I am a newbie. I am trying to configure SD on my IDES. I am at the point of adding partner function (Z9) to the partner procedure (ZAG) but I am getting an error message: "Partner function Z9 cannot be used for partner procedures" I cannot find the a