My iPod touch screen stopped working, how do i fix it?

My iPod(4th generation) touch screen stopped working. Okay so it was fine earlier, my home button does not work so i have been using the assistive button for months, and until earlier today it got stuck, i tried to power it off but it doesn't let me slide to power it off, and it doesn't let me press anything on the assistive menu either, and i'm currently waiting for my ipod to die but it's taking forever since it's battery lasts forever! is there any other solutions you can give me?
and i was wondering if my ipod has life insurance with apple so if something is wrong with the screen, can i take it for a new one? (my ipod is in very good conditions, not cracked or scratched, just the home button is an issue)
thanks!

Try restoring via iTunes. If necessary. try placing the iPod in recovery mode using one of these programs and then restore:
For PC
RecBoot: Easy Way to Put iPhone into Recovery Mode
If necessary:
Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
and                                           
RecBoot tip
RecBoot may have problems on 64X windows, then try:
Tenorshare ReiBoot – Enter & Exit iPhone, iPad, iPod Recovery Mode with a Single ClickFor MAC or PC           
The Firmware Umbrella - TinyUmbrella
Installs blootware on PC too

Similar Messages

  • My ipod touch screen reacts sporadically, how can I fix this?

    Hi my ipod touch screen works sporatically.  It reacts spacticaly. When I use the keypad it will slowly react and get the letter and sometimes puts in the letter several times. I barely touch it and it reacts and then other times I have to wait seconds until it will react.  What can I do to fix this?

    Periodically double click the home button and close all the apps in the recently used dock. Then power off and then back on the iPod. This frees up memory.
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup. See:                                                
    iOS: How to back up                                                                                     
    - Restore to factory settings/new iOS device.             
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar                                      

  • My touch screen wont work how do i fix it?

    the touch screen on my laptop is not working ... how can i fix it? here is my unit HP Pavilion Sleekbook 14-b050xx

    Hi @inigo_emit 
    Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your HP Pavilion Sleekbook 14-b050xx and the Touchscreen not working correctly. Here is a document on how to troubleshoot screen issues in Windows 8.
    Hope this help resolve the issue with the Touchscreen.
    Thanks.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • Everything on my ipod touch screen in zoomed, how can i fix this?

    from some reason everything on my ipod touch is zoomed, i have no idea how to fix it. help please?!

    Settings > General > Accessibility > Zoom OFF. Regards

  • Why did my brand new Ipod 5g 32gb touch screen stop working?

    So I got this ipod from the Genius Shop for about a month. A few days ago when IOS 7.1 came out, I updated it. However, the ipod seems to lag a little. Today, I was charging my ipod and for some reason, when I turn it on, the touch screen stop working (the ipod is in perfect condition). The home button, volume button and the on/off button all works fine except for the touch screen. I want to restore everything on my computer, but I can't get pass the lock screen (the touch screen seems to stop working). I just can't do anything on this ipod anymore beside turning it on and off. I can't even power it off because the touch screen is no longer touchable. So how can I restore everything, or do something about this ipod to work again. Can I still take this back to the Genius Shop and get another one without additonal charge?  

    If the reset does not work try the remaining items of:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable       
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar                              

  • My touch screen stopped working...on my brand new replacement iPod touch.

    I recieved my replacement while on vacation in Vegas, about five days ago. My new iPod has been kept nice and safe in it's case without any bumps that could damage it. Today, May 4th, I go to school with a perfectly working iPod. On my way home, kept safe in my pocket all day, the touch screen stopped working, and restarting it didn't fix it. It's brand new, so whats wrong and how can I fix it PLEASE!

    yes i have the same problem. But also other then the fact that the touch screen doesnt register it is really dark, like there is no light bulb

  • My ipod touch just stopped working! how do you restore?

    I was playing a game and my ipod touch just stopped working!  How do you restore it , as of now it has a bright white screen and won't power off or even connect to my computer.

    Try restoring via iTunes. If necessary. try placing the iPod in recovery mode using one of these programs and then restore:
    For PC
    RecBoot: Easy Way to Put iPhone into Recovery Mode
    If necessary:
    Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
    and                                           
    RecBoot tip
    RecBoot may have problems on 64X windows, then try:
    Tenorshare ReiBoot – Enter & Exit iPhone, iPad, iPod Recovery Mode with a Single ClickFor MAC or PC           
    The Firmware Umbrella - TinyUmbrella
    Installs blootware on PC too

  • HT201263 My iPod touch suddenly stopped working. It was fine, but when I went back the screen had gone black and I was unable to turn it on. It is now unresponsive and my computer does not recognize it when it is plugged in. What should I do?

    My iPod touch suddenly stopped working. It was fine earlier, but when I went back a few hours later, the screen had gone black and I was unable to turn it on. It is now unresponsive and my computer does not recognize it when it is plugged in. I thought it just needed to be charged but there seems to be a larger issue now. What should I do?

    Let your ipod die. Then when it is dead charge it adn turn it back on. After that it should be fine.

  • The voiceover on ipod touch has stopped working.  not sure how i managed to stop it.  Any ideas how I get it speaking again?

    The voiceover on my ipod touch has stopped working.  Not sure what i have done to stop it.  anyone any idea how i get it started again?

    Turn VoiceOver on or off: Go to Settings > General > Accessibility > VoiceOver. You can also set Triple-click Home to turn VoiceOver on or off. See “Triple-click Home” on page 129.
    copied from page 120, ipod touch user guide 5

  • Ipod nano 6th gen touch screen stopped working please help

    Everything on the ipod nano 6th gen is working except the touch screen and once it goes to sleep i have to hold the sleep button and the volume down button to turn it back on. I went into the volume -, sleep, volume + menu and went through the tests and in the touch panel error check section it says i have IC error reported: 0xFFFFFFFF. Please help as i have reset and restored and update itunes etc. Do i need to send it in to apple? The touch screen was working at one stage and then i disconected from the computer while it said eject first (this is when the touch screen stopped working) and put the ipod on a different computer. The first computer was windows 7 which i used just to charge it a little and the second one im using is windows vista.

    I have had the same problem and changed three Nano's. Each time the fault is diagnosed by Apple as "water damage".
    If you take your Nano to one of their maintenance centres they will look into either the headphone socket or the power dock and and tell you that you have infringed the warranty by somehow getting the thing wet.
    Basically is a poorly designed piece of kit whereas a simple shuffle is way more robust.
    I have given up with my Nano and am now using an old model

  • My ipod touch just stop working the screen is blue I cannot re-set it but the time is correct and it keeps up-dating

    My IPOD Touch just stop working - I was listening to music and it stop.  I cannot power it down or re-start it.  The time is correct and that is I can see at the top of the screen of the IPOD along with the battery info

    Try resetting:
    Hold both the home and power buttons at the same time until the Apple boot logo appears. No data will be lost.

  • Ipod touch has stopped working. the screen showes that it need to connect to power.

    ipod touch has stopped working. the screen showes that it need to connect to power.

    Hey there our3goldens,
    It sounds like you are unable to successfully boot your iPod Touch. I would recommend these steps specifically from the following article, named:
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    If the device remains unresponsive or does not turn on (or power on), reset your device.
    Let it charge for at least twenty minutes, then see if it starts normally.
    If there is no image on the screen, press the Sleep/Wake button to attempt to wake the device.
    If the screen displays a red battery icon, continue charging the device until the battery is fully charged. Learn more about charging iPhone and iPod touch, or iPad.
    If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes:
    Connect the device to your computer and open iTunes.
    If the device appears in iTunes, select and click Restore on the Summary pane. Learn more aboutrestoring iOS software.
    If the device doesn't appear in iTunes, try to force the device into recovery mode, and then restore it.
    If the above steps do not resolve the issue, contact Apple.
    Thank you for using Apple Support Communities.
    All the best,
    Sterling

  • My ipod touch 4th generation ipod camera stopped working how can i fix it?

    My ipod touch 4th generation camera stopped working how can i fix it?

    Basics from the manual are restart, reset, restore.
    Try each of these.

  • My ipod touch 4th generation lock button has stopped working how do I fix it myself or how much will it cost to be repaired?

    My ipod touch 4th generation lock button has stopped working how do I fix it myself or how much will it cost to be repaired?

    Hi peace1161,
    If you are looking for more information about repair pricing should you decide to have your iPod Touch serviced, you may find the following page helpful:
    Service Answer Center - iPod
    http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipod
    Regards,
    - Brenden

  • Touch screen stopped working on iPhone 5

    Hi guys,
    My brother is using iPhone 5 in iOS 8.0.2 v and suddenly his phone start searching for the antenna and the touch screen stopped working (I can't even side to unlock )!! The screen will be on still the phone reset automatically and when is up it will search again for the antenna and every steps repeat all overThe screen Really got confused what had happened to phone. Even I try to reset it by holding Power bottom and Home bottom after resetting nothing has changed. Also the bottoms stopped working while the screen is on (when I'm holding the Power bottom it won't show me to side for power off )
    Every time I had a problem I posted my problem here, but i got nothing from anyone, if is it for my bad English I'm sorry but I really need some help here.
    What can I do!?
    Thanks

    First, try to reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again. If this does not work, set it up as new device without using the backup, in case it contains corrupt data causing this problem.
    How to back up your data and set up as a new device
    If still no luck, get it serviced by Apple:
    Apple - Support - Service Answer Center

Maybe you are looking for

  • How to delete trailing zeros from a quantity field to display in ALV?

    Hi there, i am retrieving the field LGMNG from LIPS table, which is of type QUAN(13). All LGMNG values there are stored as 1,000 20,000 50,000 etc. But i want my values to be displayed as 1 20 50 etc. i have tried the " shift v_variable right deletin

  • How to expose a page out of PS authenication

    How to expose a page out of PS authenication, Say i've a register page for a event page, i want to email blast that. how do i make that page available to user without a OPRID?, just like any other webpage? Thanks, Kaushik

  • Error in posting - Internal Orders

    Dear Forum, The users are trying to post the FI Document with the orders entered in the order field. However, the system does not allow the postings and gives the error message - FI Posting not allowed (Order xxxx). Could you please advise what needs

  • ActiveX and PlugIn Flashplayer both installed - only ActiveX updates automatically

    I'm responsible for a bunch of Windows computers including some at a non-profit where we have both IE and Firefox (as well as Chrome) installed. Consequentially we have both the ActiveX and PlugIn versions of Flashplayer installed.  It seems that the

  • Using OEPE for OSB Development

    Hello All- I have downloaded oepe-galileo-all-in-one-11.1.1.5.0.201003170852-win32 from http://www.oracle.com/technetwork/developer-tools/eclipse/downloads/index.html Oracle Service Bus 11.1.1.3 is installed on a Remote Windows 2003 Server and I am p