My ipod touch seems not get the singal to slide. What can i do, do i replace the screen?
If replacing the screen and it doesnt work still, what could of went wrong?
Have you tried the following to rule out a software problem:
- Reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory deafualt/new iPod
If you still have the problem that indicates hardware problem. It could be the digitizer or its driver circuit.
Similar Messages
-
HT1212 My Ipod Touch is disable for 22,824,966 minutes what can I do??
My Ipod Touch is disable for 22,824,966 minutes what can I do??
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
I uploded the new itunes software and now my ipod touch is not getting reconized in my itunes. I went through all the trouble shooting support from apple. But I do have a avast antivirus on my computer i wonder if that is what is holding it up
Could be since it (security software) is listed as #5 in the following:
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows -
My 4th Gen Ipod touch will not get past the apple logo
My 4th Gen Ipod touch will not get past the apple logo (unless the battery is dead, Then it tell me to charge it). Once it gave me the connect to itunes screen. I clicked restore in itunes but the ipod went back to the apple logo before the update download finished. I tried calling apple but my over the phone technical support just expired. PLEASE HELP!
This can be a corrupted software/firmware on your iPod touch. If the recovery mode you did was not forced, then try to force it into recovery mode. This is how:
1. Force it to shut down (note: this sort of shut down should not be preformed unless you are in a situation like this because it is a hardware shutdown and will not attempt to unload software, save unsaved files, safely stop system processes, etc.) to do this, hold down the power/sleep button and home button for about 7 or 10 secs. Also I might be incorrect but I heard that you can just hold down the sleep and home button until the screen goes blank and then immediately let go.
2. Have iTunes running. Hold down the home button and plug the USB cable that came with your iPod into it. Keep on holding on the home button until a picture of a USB cable going into the iTunes logo appears. You are now in a forced recovery mode. (In case your not so tech-savvy forced recovery is the same as a normal recovery mode that an iPod might do if it knows an update or restore failed.)
3. iTunes should have shown a pop-up message about it found a iPod in recovery mode. Click OK, click your iPod from the sidebar and click restore. The iPod will show the apple logo for a while and iTunes will say "preparing iPod for restore" and then "waiting for iPod" this was the longest part of updates for me.
4. iPod will reboot when restore is completed. When I update my iPod it one time showed the apple logo for one whole sync until it showed the slide to unlock screen, so do not worry. P.S if that does not work do a DFU mode restore ( I've been told DFU mode stands for device firmware update mode) I'm running out of room, so google it. Hope this helped ;) -
my ipod touch is not getting recognised after the update in my itunes library. i have updated my library as well. but it shows the connect to itunes sign on my ipod.
If it happened after updating iTunes on the computer see:
iOS: Device not recognized in iTunes for Windows
or
iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X
If after updating the iOS on your iPod:
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
My screen had a black out and since then, my ipod touch is not getting started. it just shows ' connect ipod to itunes'. Even after doing that, my Itouch doesn't appear anywhere in Itunes. Help !! ??
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
I was in the middle of the new update and it said there was a error and now my ipod touch will not turn on or off or anything it is just a picture of the apple.
thank you
KristyError 11 is a strange one...if you search the discussions for error 11 you will get a number of hits but none with a real resolution other than getting the iPod to restore, which you have done. And one person indicates this does not appear in the support data base...already found that out.
If you have restored, have a backup and can restore from that, you might try the update again, or wait for the next update whenever that comes out.
Not a very satisfactory answer but if it is working again... -
my ipod touch is not responding. It wont turn on. I have plugged it to the wall charger and its not receiving a signal. I have plugged to my itunes and its not sending a signal to my computer. what could be wrong?
Did you check the USB cable or try another one?
Did you check the docking port for any kind of debris or lint?
Did you already try to reset your device by holding the sleep and home button until the Apple logo comes back again? -
I can download photos to my computer via my Ipod Touch but not a video of 833mb yet I can send it to my FB account on the same said device, does this make any sense?
See:
iOS: Importing personal photos and videos from iOS devices to your computer
Do y have XP? if so see that topic in the above link,
Can you go to My Computer>iPod>DCIM folder and copy it from there?
Windows XP can't import video files larger than 500 MB using Camera and Scanner Wizard. You can transfer these files from your device by selecting them in My Computer and dragging or copying the files to your computer's hard drive. -
My ipod touch is not charging or switching on. What should I do?
My ipod touch is not charging or switching on. What should I do?
Try:
iOS: Not responding or does not turn on
If not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order. -
My ipod touch 4g heats up in a few minutes what can I do thanks
my ipod touch 4g heats up in a few minutes what can I do thanks
Wit heavy use like gaming the iPod can get quite warm.
Are you getting a over-temperature warming message?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
My iPod Touch is not working with Bose SoundDock. How can I fix it?
My iPod Touch is not working with Bose DoundDock Series II. Can anyone suggest how I can get these 2 to work together?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
Apple will exchange your iPod for a refurbished one with a new battery for $79 Y can do the exchange at an APple store or sent it in.. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following will replace your battery for less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace the battery yourself if you are up to it. Y can purchase a eplacement battery for about $10
iPod Touch Repair – iFixit -
My Ipod Touch is not getting connected to the itunes its showing error
my ipod dose not get connected in the itunes its goin on showing an error message whn ever i connect kindly help me plz
it says tht the ipod cannot connect to d itunes and on my ipod screen an image only i can c the image is like when u buy the ipod and connect it for the first time to your laptop u can see an image right asking u to connect to the itunes only that image i can c and on my itunes page it shows an error that my ipod cannot connect......
-
I have been on the Apple Support page for several hours now and cannot find my exact circumstance and other suggestions have yet to help me. I purchased a locked ipod touch and when I plug it into my laptop itunes says "Itunes could not connect to ipod because it is locked with a passcode". The guy I bought it from told me the password but I failed to write it down and remember it and he has since moved so I can't find him. I have tried putting it in DFU mode and I can get it there, but then Itunes does not show the pop-up that everyone has said will come up with the alert about an ipod trying to restore itself so I cannot get it to do so. Any suggestions would be greatly appreciated!
Thanks,
AMWhen in DFU mode and connected to the computer iTunes does not say anything but iTunes will see the iPod and you can restore the iPod via iTunes. When in recovery mode and you connect, iTunes will say it found an iPod in recovery mode.
-
My iPod Touch Is Not Getting All My Artwork
I recently made a playlist of songs I want to have on my iPod Touch, since it's to small to hold all of the songs in my iTunes Library (I also have a 30 GB iPod Video).
Just because I really hate looking at that ugly music note when a song doesn't have artwork on the iPod Touch, I went through that playlist and made sure I put artwork in almost every track (sans live performances). The artwork shows up perfectly fine in my iTunes, but when I synced my iPod Touch, only SOME of that new artwork showed up on the iPod touch.
I tried just deleting everything on the iPod and syncing the songs up again, but I got the same result.
Is there anything that I'm doing wrong?Have you checked to make sure iTunes is set to copy the Artwork?
Go to the iPod's Summary Page, by clicking it under devices.
Then click the Music Tab, there should be a check box regarding Artwork, make sure its checked.
If it is, try restoring your Touch?
Maybe you are looking for
-
When printing on a digital press, why are the colors different between INDD & PSD?
I've created the exact same CMYK mix in both InDesign and Photoshop. When printed on a digital press they are not the same color. Any ideas how this can be fixed/solved?
-
Error during installing Adobe LifeCycle Designer
Hi all, I am trying to install Adobe LifeCycle Designer 8.1 , already downloaded all files from service marketplace. But while running set up,getting below error message: The SAP Front-End Installer executable is unable to process the XML files.Resta
-
Sap standard variable for currecnt calmonth & year
hi please let me know any sap standrd variable for current month & year
-
Contacts on 3GS with iOS5 is just not working
There is no "+" sign in contacts nor is there any ability to edit a contact in the new iOS 5 software on my 3GS. This is really an outrage! Can someone at apple get us an answer on this!!!
-
hi every one, i'm getting problem in LOV .. please any one tell me how to use LOV by applying particular condition ? Activity: Using LOV Instructions 1. Edit the Maker object so that it only lists cars bought by clients from the UK. 2. Save and e