My Ipod Touch Shake & Steering Functions (motions) are not working

I have had my ipod touch 32gb for 3 months now and in the last 48 hours, my shake function & steering function in apps & song shuffle and pretty much any motion function has stopped working. I am not getting any error messages either. I have turned off the ipod touch and turned off on these functions and nothing changes.
Can anyone help me ?
Thanks.

Do a restore through iTunes. Skip the restore as new option and restore from the last backup point. This should fix it but if it persists, it could be a hardware problem which will require Apple's attention.

Similar Messages

I bought games and music on my ipod touch and then bought a new mac, but i updated my ipod on the new mac and lost all of my games and music and they arent on my computer or my ipod touch:( The apps i bought are not on my old computer either!! please help

bought games and music on my ipod touch and then bought a new mac, but i updated my ipod on the new mac and lost all of my games and music and they arent on my computer or my ipod touch:( The apps i bought are not on my old computer either!! please help!!! I don't want to buy them all again!!

- You can redownload yur apps at no additional cost. See:
How to redownload purchased apps from the App Store
- You only get one download of music and it is up to you to make a backup. However, sometimes if you explain what happens the iTunes store may allow a redownload of music. You can contact them by starting here and selecting the appropriate topic:
Apple - Support - iTunes

HT1212 my ipod touch disabled and my p.c not working what do i do

my ipod touch disabled and my p.c not working what do i do

Thgen the iPod needs a wifi connection to the internet and yo need another iPod, iPhone or iPad with the FindMyiPhone app. you can also yse any computer too
Only if:
If you previously turned on FIndMyiPod on the iPod in Settings>iCloud and wifi is on and connected go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone and use Remote Wipe to erase the contents of your device. If you have been using iCloud to back up, you may be able to restore the most recent backup to reset the passcode after the device has been erased.
You can also wipe the iOS device by installing the FindMyiPhone app on another iOS device and using that app to wipe the device.
Via USB with any computer with iTunes and an internet connection
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.

Hi APPLE! I have one question, Why does my iPod Touch 5-th generation WiFi is not working, When an iPod is in sleep position It appeared after the update iOS seven!! Please tell me how to fix it!!

Hi APPLE! I have one question, Why does my iPod Touch 5-th generation WiFi is not working, When an iPod is in sleep position It appeared after the update iOS seven!! Please tell me how to fix it!!

You are not addressing APple here. We are all just users like yourself.
See if this long discussion for iOS 6 helps
How do I make IOS 6 keep wifi on when...: Apple Support Communities

Function keys are not working correctly

I've been looking all over the various threads and I can't find an answer that solves my problem.
Here are the details:
I bought the computer in the U.S. where I live.
I have a iMac 2.4GHz intel Core 2 Duo EMC 2133 with a 20" screen. Bought it new in February 2008.
I have Mac OS X 10.5.8 (I am waiting for my order for OS Snow Leopard to come in!!)
I have been using a wireless mouse and Keyboard (Love not having cords!)
Recently, my wireless keyboard got a short and quit working. I went down to the apple store and got a new wireless keyboard.
I had the computer with me at the genius bar so, yes, the apple employee saw exactly what I have.
I took it all home got the thing all put back together and got the new keyboard paired up and working with the computer.
Here are the problems:
Went to go use the function keys while using iTunes and found they weren't working properly. The F10, F11 and F12 do not control the volume of sound as the keyboard indicates they would, they instead activate dashboard, spaces, and application windows.
Following the advice of other threads, I looked over in the system preferences and made sure the "Use all F1, F2 etc." box was unchecked (it was unchecked), things still didn't work.
I tried the fn key but it appears to not work at all it has no effect on the functioning of the function keys.
I went under keyboard shortcuts in system preferences and found the F10, F11 and F12 keys, it confirms that those keys control spaces, dashboard and application windows as they are performing but shows no options to either reassign to volume control (as marked on the keyboard) or make the fn key work.
I've gone back and forth trying various combinations of checked and unchecked boxes to see if anything would work, so far I've come up with nothing.
A couple more important or interesting facts:
Yes I have turned off and taken the batteries out of the old keyboard. My bluetooth connection currently shows it as disconnected.
I have restarted the computer.
One thing I find odd; when I go under preferences and go to Keyboard and Mouse when I go under the section "Bluetooth" it shows Bluetooth mouse with the name of the mouse and the battery level. BUT nothing is showing up under bluetooth Keyboard, I can't figure out how to change this and don't know if it is contributing to the problem.
When I go under the bluetooth logo on the top bar I find the mouse and both keyboards referenced, the old keyboard is shown as disconnected and the other two are connected. I have tried to update the device's name but it doesn't seem to let me.
I have double clicked on the device under bluetooth and it shows the new keyboard as discoverable, paired and connected. Hence, I am using the new keyboard to write this inquiry.
Please, any assistance would be of great help. I have tried to be thorough in order help narrow the possible problem. Thanks!!

Hendry
Just thought I'd let you know. Our suspicions were correct, it was the OS. After I installed Snow Leopard (10.6.8) all the problems were corrected. I also updated the RAM from 1 gb to 6 gb. The mac is working all around better. Sorry it took so long to get back to everyone. My superdrive had pooped out. Rather than replace it I got an external drive from OWC connected with firewire 800. So far everything is running very well, as far as I can tell this external drive is better than the original superdrive. My superdrive has always acted funny, infact I returned the first mac I got after a week because its superdrive was also malfunctioning. Anyway, all that to say everything seems to be fully functioning again.
Roy
Re: Function keys are not working correctly

How to remove passcode from ipod touch 3g if power botton is not working?

how to remove passcode from ipod touch 3g if power botton is not working?

Use this program to place the iPod in recovery mode so that you then can restore the iPod via iTunes.
RecBoot: Easy Way to Put iPhone into Recovery Mode

My Macbook Pro (bought in 2013) function keys are not working

My Macbook Pro (bought in 2013) function keys are not working. The function keys ie the volume and brightness are not working at all both with one single tap and with the function button. I have checked the settings for the keyboard but nothing seems to stand out that is making the keys not work?
Please can you help?
Thanks
Kat

Some might suggest resetting the SMC, but I don't really think that will solve the problem. You can try, though.
I would suggest, since you're still under warranty, taking your machine to your local Apple Store/AASP and letting them fix the problem. It could be any sort of hardware problem. Only the Apple techs have the tools to properly diagnose and repair the machine.
Clinton

Function keys are not working on a paired apple bluetooth keyboard

hello, I just got this apple bluetooth keyboard and paired it to my ipad2. The letter and number keys are working perfectly fine, but my ipad will not respond to F1 to F12 keys,I tried Fn+F1-F12 they are not working. Then I tried to restart both my ipad and keyboard but the problem is still there. Additionally, Command+arrows can't function either. command+space is working though. Could some one please help? thanks a lot!

It might have been functionality that Apple has removed in the current version of iOS. This old web article says the function keys worked in iOS3, but that's a couple of years ago:
http://socialtimes.com/apple-bluetooth-wireless-keyboard-function-keys-work-with -the-ipad_b47087

Case statement and Decode function both are not working in Select cursor.

I have tried both the Case statement and Decode function in Select cursor, but both the things are not working. On the other hand both the things work in just select statement.
See the first column in select (PAR_FLAG), I need to have this evaluated along with other fields. Can you please suggest some thing to make this work. And also I would like to
know the reason why decode is not working, I heard some where Case statement do not work with 8i.
Author : Amit Juneja
Date : 06/20/2011
Description:
Updates the Diamond MEMBER_MASTER table with the values from
INC.MEM_NJ_HN_MEMBER_XREF table.
declare
rec_cnt number(12) := 0;
commit_cnt number(4) := 0;
cursor select_cur is
Select DECODE(1,
(Select 1
from hsd_prov_contract R
where R.seq_prov_id = PM.seq_prov_id
and R.line_of_business = H.line_of_business
and R.PCP_FLAG = 'Y'
and R.participation_flag = 'P'
and SYSDATE between R.EFFECTIVE_DATE AND
NVL(R.TERM_DATE,
TO_DATE('31-DEC-9999', 'DD-MON-YYYY'))),
'Y',
'N') PAR_FLAG,
H.SEQ_ELIG_HIST,
H.SEQ_MEMB_ID,
H.SEQ_SUBS_ID,
H.SUBSCRIBER_ID,
H.PERSON_NUMBER,
H.EFFECTIVE_DATE,
H.TERM_DATE,
H.TERM_REASON,
H.RELATIONSHIP_CODE,
H.SEQ_GROUP_ID,
H.PLAN_CODE,
H.LINE_OF_BUSINESS,
H.RIDER_CODE_1,
H.RIDER_CODE_2,
H.RIDER_CODE_3,
H.RIDER_CODE_4,
H.RIDER_CODE_5,
H.RIDER_CODE_6,
H.RIDER_CODE_7,
H.RIDER_CODE_8,
H.MEDICARE_STATUS_FLG,
H.OTHER_STATUS_FLAG,
H.HIRE_DATE,
H.ELIG_STATUS,
H.PREM_OVERRIDE_STEP,
H.PREM_OVERRIDE_AMT,
H.PREM_OVERRIDE_CODE,
H.SEQ_PROV_ID,
H.IPA_ID,
H.PANEL_ID,
H.SEQ_PROV_2_ID,
H.SECURITY_CODE,
H.INSERT_DATETIME,
H.INSERT_USER,
H.INSERT_PROCESS,
H.UPDATE_DATETIME,
H.UPDATE_USER,
H.UPDATE_PROCESS,
H.USER_DEFINED_1,
H.SALARY,
H.PEC_END_DATE,
H.REASON_CODE,
H.PEC_WAIVED,
H.BILL_EFFECTIVE_FROM_DATE,
H.BILLED_THRU_DATE,
H.PAID_THRU_DATE,
H.SUBSC_DEPT,
H.SUBSC_LOCATION,
H.USE_EFT_FLG,
H.BENEFIT_START_DATE,
H.SEQ_ENROLLMENT_RULE,
H.MCARE_RISK_ACCRETION_DATE,
H.MCARE_RISK_DELETION_DATE,
H.MCARE_RISK_REFUSED_DATE,
H.COMMENTS,
H.USER_DEFINED_2,
H.USER_DEFINED_3,
H.RATE_TYPE,
H.PCPAA_OCCURRED,
H.PRIVACY_ON,
H.PCP_CHANGE_REASON,
H.SITE_CODE,
H.SEQ_SITE_ADDRESS_ID,
PM.seq_prov_id rendered_prov
from hsd_member_elig_history H,
INC.PCP_REASSIGN_RPRT_DATA P,
hsd_prov_master PM
where P.subscriber_id = H.subscriber_id
and P.rendered_pcp = PM.provider_ID
and H.elig_status = 'Y'
and (H.term_date is NULL or H.term_date >= last_day(sysdate))
order by H.Seq_memb_id;
begin
for C in select_cur loop
rec_cnt := rec_cnt + 1;
update hsd_member_elig_history
set term_date = TRUNC(SYSDATE - 1),
term_reason = 'PCPTR',
update_datetime = SYSDATE,
update_user = USER,
update_process = 'TD33615'
where seq_elig_hist = C.seq_elig_hist
and seq_memb_id = C.seq_memb_id;
INSERT INTO HSD_MEMBER_ELIG_HISTORY
(SEQ_ELIG_HIST,
SEQ_MEMB_ID,
SEQ_SUBS_ID,
SUBSCRIBER_ID,
PERSON_NUMBER,
EFFECTIVE_DATE,
TERM_DATE,
TERM_REASON,
RELATIONSHIP_CODE,
SEQ_GROUP_ID,
PLAN_CODE,
LINE_OF_BUSINESS,
RIDER_CODE_1,
RIDER_CODE_2,
RIDER_CODE_3,
RIDER_CODE_4,
RIDER_CODE_5,
RIDER_CODE_6,
RIDER_CODE_7,
RIDER_CODE_8,
MEDICARE_STATUS_FLG,
OTHER_STATUS_FLAG,
HIRE_DATE,
ELIG_STATUS,
PREM_OVERRIDE_STEP,
PREM_OVERRIDE_AMT,
PREM_OVERRIDE_CODE,
SEQ_PROV_ID,
IPA_ID,
PANEL_ID,
SEQ_PROV_2_ID,
SECURITY_CODE,
INSERT_DATETIME,
INSERT_USER,
INSERT_PROCESS,
UPDATE_DATETIME,
UPDATE_USER,
UPDATE_PROCESS,
USER_DEFINED_1,
SALARY,
PEC_END_DATE,
REASON_CODE,
PEC_WAIVED,
BILL_EFFECTIVE_FROM_DATE,
BILLED_THRU_DATE,
PAID_THRU_DATE,
SUBSC_DEPT,
SUBSC_LOCATION,
USE_EFT_FLG,
BENEFIT_START_DATE,
SEQ_ENROLLMENT_RULE,
MCARE_RISK_ACCRETION_DATE,
MCARE_RISK_DELETION_DATE,
MCARE_RISK_REFUSED_DATE,
COMMENTS,
USER_DEFINED_2,
USER_DEFINED_3,
RATE_TYPE,
PCPAA_OCCURRED,
PRIVACY_ON,
PCP_CHANGE_REASON,
SITE_CODE,
SEQ_SITE_ADDRESS_ID)
values
(hsd_seq_elig_hist.nextval,
C.SEQ_MEMB_ID,
C.SEQ_SUBS_ID,
C.SUBSCRIBER_ID,
C.PERSON_NUMBER,
trunc(SYSDATE),
C.TERM_DATE,
C.TERM_REASON,
C.RELATIONSHIP_CODE,
C.SEQ_GROUP_ID,
C.PLAN_CODE,
C.LINE_OF_BUSINESS,
C.RIDER_CODE_1,
C.RIDER_CODE_2,
C.RIDER_CODE_3,
C.RIDER_CODE_4,
C.RIDER_CODE_5,
C.RIDER_CODE_6,
C.RIDER_CODE_7,
C.RIDER_CODE_8,
C.MEDICARE_STATUS_FLG,
C.OTHER_STATUS_FLAG,
C.HIRE_DATE,
C.ELIG_STATUS,
C.PREM_OVERRIDE_STEP,
C.PREM_OVERRIDE_AMT,
C.PREM_OVERRIDE_CODE,
C.SEQ_PROV_ID,
C.IPA_ID,
C.PANEL_ID,
C.SEQ_PROV_2_ID,
C.SECURITY_CODE,
SYSDATE,
USER,
'TD33615',
SYSDATE,
USER,
'TD33615',
C.USER_DEFINED_1,
C.SALARY,
C.PEC_END_DATE,
C.REASON_CODE,
C.PEC_WAIVED,
C.BILL_EFFECTIVE_FROM_DATE,
C.BILLED_THRU_DATE,
C.PAID_THRU_DATE,
C.SUBSC_DEPT,
C.SUBSC_LOCATION,
C.USE_EFT_FLG,
C.BENEFIT_START_DATE,
C.SEQ_ENROLLMENT_RULE,
C.MCARE_RISK_ACCRETION_DATE,
C.MCARE_RISK_DELETION_DATE,
C.MCARE_RISK_REFUSED_DATE,
C.COMMENTS,
C.USER_DEFINED_2,
C.USER_DEFINED_3,
C.RATE_TYPE,
C.PCPAA_OCCURRED,
C.PRIVACY_ON,
C.PCP_CHANGE_REASON,
C.SITE_CODE,
C.SEQ_SITE_ADDRESS_ID);
commit_cnt := commit_cnt + 1;
if (commit_cnt = 1000) then
dbms_output.put_line('Committed updates for 1000 records.');
commit;
commit_cnt := 0;
end if;
end loop;
commit;
dbms_output.put_line('Total number of MEMBER_ELIG_HISTROY records inserted : ' ||
rec_cnt);
exception
when others then
raise_application_error(-20001,
'An error was encountered - ' || sqlcode ||
' -error- ' || sqlerrm);
end;

user10305724 wrote:
I have tried both the Case statement and Decode function in Select cursor, but both the things are not working. Please define what you mean by not working even if your computer screen is near the internet we can't see it.
You should also look at the FAQ about how to ask a question
SQL and PL/SQL FAQ
Particularly *9) Formatting with {noformat}{noformat} Tags* and posting your version.
know the reason why decode is not working, I heard some where Case statement do not work with 8i.
Does this mean you are using 8i? Then scalar sub queries - selects within the select list, are not supported, along with CASE in PL/SQL.
Select DECODE(1,
* (Select 1
from hsd_prov_contract R
where R.seq_prov_id = PM.seq_prov_id
and R.line_of_business = H.line_of_business
and R.PCP_FLAG = 'Y'
and R.participation_flag = 'P'
and SYSDATE between R.EFFECTIVE_DATE AND
NVL(R.TERM_DATE,
TO_DATE('31-DEC-9999', 'DD-MON-YYYY')))*,
'Y',
'N') PAR_FLAG,
>
exception
when others then
raise_application_error(-20001,
'An error was encountered - ' || sqlcode ||
' -error- ' || sqlerrm);
http://tkyte.blogspot.com/2008/01/why-do-people-do-this.html

Some function keys are not working on my Portege R830

Like others, I have a new Portege R830 and experienced the sudden unexplained loss of functionality of the 13 function keys. My os is a native windows 7 64bit install, with office 2010 installed afterwards. I have the SSD model.
I followed the instructions, removing TVAP and re-installing, and I have both VAP and flashcards operational. I used the USA site drivers for the latest set (the Australian and European driver sets are older versions and different).
Most, but not all, of the function keys are now working again. What isn't working are as follows:
- F12 functionkey not operating
- volume up and down keys not operating - what I am most interested in - any suggestions on how to get functional again please?
also, on re-installing VAP, I lost functionality on ecobutton. Any suggestions on how to get working again?
thanks in anticipation

Hi
You are on the right way dude the VAP and Flash Card Support Utility controls the FN buttons. If you have an European notebook model, I would recommend using the drivers from Toshiba European driver page but generally speaking there should not be a difference in the software
However, in my case restarting the Flash Cards helps to get back the FN buttons functionality. The Flash Cards can be found in All Programs -> Toshiba -> Flash Cards.
So check if restart would help you.
Regarding the Eco button: ECO Utility controls this button tooso would recommend installing/reinstalling this software beside the VAP

Touch Pad and Web Cam are not working after installing drivers also

Hiii
Synaptic Touch pad drivers are not working like not detecting the hardware so please help me on this
and
Webcam is not working like its not detecting even after installing cyberlink software given in the hp web site
please help me regarding this problems

1.Download hp support assistant.
2.Run it and go to the tab updates and tune-ups.
3.Click in the button check for updates. It will find you the updates.
4.Click in the button Download and Install.
5.When it finish restart your computer.
[link:http://www8.hp.com/us/en/campaigns/hpsupportassistant/hpsupport.html?jumpid=va_r602_us/en/any/psg/pl...
Also if it doesnt' work , you can also try :
1.Right click to the computer.
2.Click to the manage option.
3.Then select the device manager.
4.After that go to imagine devices and select your camera, then right click on it and select the option update the driver software do the same in the touchpad.
If and this doesn' t work unistall the drivers and install them again.

Brand New Ipod touch 4th gen right earphone jack not working out of the box. Bought at Wal-Mart yesterday. Are we missing something in the set up or should we return it?

We just purchased an ipod touch 4th gen 8 gb from Wal Mart. OUt of the box the right headphone is not working. Tried numerous pairs of headphones..tried the mono settings and nothing is working. Is there a setting we are missing or should we just return it?

If the headphone plug is fully inserted, I would return the iPod for a replacement

IPod Touch 2G Freezes Whenever Headphones Are Not Plugged In

A few months ago, my iPod Touch 2G (8GB) was having problems with the headphone jack (sound would only come out of one side of the headphones). I was still in warranty and I sent it in to Apple. They sent me back an iPod (I'm not sure if it's the same one I had or a new one) that no longer had that headphone jack problem and apparently worked fine. Over the next couple of months I noticed that the iPod will freeze consistently. If no headphones are plugged in then it will freeze almost instantly when I try to do something such as running an app or playing music. It usually works fine with headphones plugged in, but on occasion it will freeze when I try to adjust the volume. I checked my serial on the apple website and was told that my warranty had run out. I thought it to be a firmware issue or something but I've restored it several times and the problem still occurs. Any help on this issue would be greatly appreciated.

When restoring an iPod to factory settings/new iPod fails to resolve a problem that indicates a hardware problem and an appointment at the genius Bar of an Apple store is in order.

IPod Touch 5th gen - GPS Very Vague / Not Working Well at All

I've been trying to use the NavFree GPS app on my new iPod touch 5th generation.
All I can say is that it sort-of works - in so much as it displays the vague vicinity I'm in within a few streets, however most of the time it just seems to be constantly hunting around for a location and is useless in the car for actual real-time directions - which seem to be randomly thrown out every now and then.
I've tried locating it in numerous places on the windscreen and on the dashboard but it hasn't made any difference whatsoever. Also when using it out in the open in walking mode, it will locate me for a moment then will wander off again and will start to show me standing in numerous different streets and places nearby.
I'm very disappointed at the moment because I purchased the full version with all the extras thinking that I've solved my sat-nav needs, but it's unusable as it is.
Can anyone help me with fixing this?
Cheers.

The iPod touch does not have a GPS radio. For location it relies upon the locations of nearby wifi routers that are in Apple database of routers and their locations. Thus, this app/the iPod alone without a real GPS accessory, works very poorly in a car since it really can't see may wifi routers and without a internet connection, can't access the Apple database to try to locate new routers that it finds.

IPod Touch (latest generation) internal sound malfunctioning/not working

Defective sound on my new (received June 23, 2011) iPod touch 64GB. The iPod Touch will play when an external speaker or earbuds are attached; however, the sound cannot be heard when the external speakers/earbuds are not attached. When the iPod is not attached to any external speakers or earbuds, at infrequent times a very faint, static-filled sound can be heard, but it fades out to nothing.
This is the latest generation of the iPod touch. I have not had it for one month yet! What gives??? I also have an iPhone 4 and iPad2.... I'm having no problems with them (so far).

Try to set it up "as new device" without using the latest backup and only the default apps installed. If still no sound after that, visit your next Apple Store or contact Apple to get it serviced.
Apple - Support - iPod - Service FAQ
How to back up your data and set up as a new device

My Ipod Touch Shake & Steering Functions (motions) are not working

Similar Messages

Maybe you are looking for