My iPod Touch shows the Apple logo splash screen and then turns off.
When I turn my iPod Touch on, the Apple logo is shown and then it turns off. After a few seconds, it shows up again. It continues to do this non-stop. Is there anything I can do? Any help would be greatly Appriciated
Let the battery fully drain. It may take awhile. After charging for at least an hour. If the iPod does not cycle on and off any more try:
iOS: Not responding or does not turn on
Otherwise it appears you have a hardware problem and an appointment at the genius Bar of an Apple store is in order.
Similar Messages
-
I plugged my iPod into my computer to retore it and proceeded to do so as told. The only thing that happened after that was that the Apple logo keeps showing up and nothing else. My computer/iTunes no longer recognizes my iPod either.
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Last night I turned my iPod touch 4g off randomly and then when I went to turn it back on and went to unlock the screen it froze up right there and will not unlock to the home screen to where all my apps and all that are. Ever since that happened the iPod keeps showing the apple logo repeatedly, as well as a screen being completely blank when still turned on. Also when i plug in the iPod to the computer it recognizes it for a second but the iPod does nothing and shuts off and repeats in showing the apple logo and blank black screen. I can get it to the home screen where the slide to lock button is but every time i even attempt to slide it, it freezes up and doesn't do it.
I also having been trying to restore it by plugging in the cord and pressing the home button to get the screen with the usb cord to pop up but no matter what i do, it will not let me turn the iPod off period because every time i keep trying to do that it just shows the apple logo and all of what i said up above again. I have also seen it get a white screen to show a few times , which i assume means the white screen of death. I have never seen that screen before this happened.
I know this is not making any sense whatsoever but this is very hard to put into words in explaining. I have searched the internet but i can't find a single problem that sounds like this one in solving to fix it. The iPod is on right now as i'm typing this. I haven't attemtped to push the buttons down again to fix as i would assume maybe to just leave it alone as i sleep through the night in hopes of it maybe working or even dying. I've only had this iPod for 4 months now and i just don't understand why it won't let me turn it off completely or work properly for me to restore it.Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
My ipod keeps showing the apple logo on and off after i updated it?
my ipod keeps showing the apple logo on and off after i updated it?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
I tried to reset my ipod touch but the apple logo wont go away and isnt responding to my computer HELP!!
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Please help me!My Ipod only show the Apple Logo :(
Yesterday,when i use my Ipod,i was reset it,but when the logo Apple show again,it can not go to the Menu so i was plug it to AC Adapter and put it into Disk Mode but when i plug it to my PC ,the Ipod was show the Apple Logo(not in disk mode)So what i need do to restore my IPOD????Please help me!:(
have you tried this
http://docs.info.apple.com/article.html?artnum=61584 -
My ipod stays at the apple logo whenever i try to turn it on and Itunes doesn't recognize it when i plug it in to the laptop. What do i do?
Try This...
Reset ( No Data will be Lost )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...
If no joy...
Place the Device into Recovery mode...
http://support.apple.com/kb/HT1808
Note on Recovery Mode.
You may need to try this More than Once...
Be sure to Follow ALL the Steps...
Once you have Recovered your Device...
Re-Sync your Content or Restore from the most Recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766 -
Tried to open an app and my iPad gen one froze. It only shows the apple on black screen and will show the operating wheel sometimes and while plugged in it will beep every few minutes. Will not load one show anything on screen but the small white apple.
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
My Iphone 4S keeps flashing between the Apple logo, blank screen and sign on screen. It will not let me sign on or power off. It started about 20 mins ago. One of my friends started having the same issue at the same time. How can I fix this?
Hi Bucky16,
If you haven't already done so, you may want to reset the iPhone:
iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/HT1430
If the above does not resolve your issue, the next best step will be to restore your iPhone using a computer with iTunes:
iTunes: Restoring iOS software
http://support.apple.com/kb/HT1414
Thanks,
Matt M. -
please help i upgraded my iphone5 to new ios7 yesterday 2pm and untill now its already 17hours and why cant access or back to normal?is this normal or stil upgrading? it only appears the apple logo on screen and keep coming the logo screen on and off.do i need to bring my phone to apple center or is this iops 7 takes longer time or an hours to successfully upgraded.please help me what can i do?
Anyone have any suggestions? or is everyone else just as clueless as me !
-
my iphone 4 died even though it had plenty of battery, and shows no sign of life until i put it on to charge where it shows the apple sign every now and then but just turns off again after a few seconds.....HELP!!!!
Could be a defective battery, you should get it checked by visiting an Authorized Apple Service Provider or Apple Store next to your place.
Find an Apple Authorized Service Provider -
After I slide to power off my iphone 3GS it would not turn on again.Only the apple logo comes on and then it is off. If I connect to the power the apple logo comes
and then it comes on . I have just used itunes to restore my iphone. How can I make my iphone work again?Keep using it untill it powers off, then charge it to full to re-calibrate the battery.
If problem persist, maybe your battery needs to be replaced. -
Iphone 4 will not start up....the apple icon comes on and then goes off and then comes on and then goes off continuously....any ideas?
1. Try doing a hard reset:
Press and hold both the Home button and the Sleep/wake button simultaneously for about 15 seconds and release when the Apple logo appears.
2. If that doesn't solve it, use: http://support.apple.com/kb/HT1808
Using this article will erase everything on the device, so make sure you have a backup!
If you get specific error messages/codes in iTunes when updating/restoring, check this: http://support.apple.com/kb/ts3694 for causes and solutions
Good luck
JW
Message was edited by: jesterwylde -
I need to repair my start up disc so I have to start up from installation disc. In doing so, my computer restarts, I hear the mac sound, then a grey screen and then turns off and goes on in this cycle endlessly. Why can't I restart from disc?
Booting From An OS X Installer Disc
1. Insert OS X Installer Disc into the optical drive.
2. Restart the computer.
3. Immediately after the chime press and hold down the "C" key.
4. Release the key when the spinning gear below the dark gray Apple
logo appears.
5. Wait for installer to finish loading. -
when i turn on my computer it stays on the grey screen and then turns off by itself. How can I fix that?
Hi , and a warm welcome to the forums!
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive & clear caches.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
If 10.7.0 or later...
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.
Hold alt or option key at bootup, do asny boot choices show up?
Maybe you are looking for
-
IPhoto calendar and book font issue
On or near Nov. 30th, 2009, I launched iPhoto 8.1 to produce a calendar. The upgrade option came up and I proceeded to do the installation. I attempted to upgrade to iPhoto 8.1.1 on a new 2.66 GHz Quad Mac Pro running OS 10.6.2. Install did not work
-
Java technologies for developing Desktop Applications
Hi, I am new to desktop applications development. Can someone tell me the java technologies, API etc. that I have to learn for desktop application development. Jagatguru
-
I just purchased my first Mac and I am loving it!!! I've used Windows for the past 20 years. I'm trying to decide if I should use something like Paralells to have W7 on my MBP. Since I can install Office 2011, the only reason to have W7 installed
-
Photoshop cs5 folder inside cs6 installation?
should there be an adobe photoshop cs5 folder when i've only installed cs6 master colelction? clean installation, no previous installs. when i try to launch the photoshop.exe in the cs5 folder, i receive an error. i'm assuming this is part of a norma
-
Lost my Certificate for 802.x authentication
Somehow my Active Directory setting for my cerificate is missing. I had a vendor install this originally and I thought it was on the Raidus server somehwere but it is nowhere to be found. I know that because computers that don't have it tell me it is