My iPod Touch stopped working somehow. It's not dead, and I didn't drop it. It just stopped working. What do I do?
It won't turn on! Why, I don't know. It just won't turn on. It's not dead, that's the weird part. And I didn't drop it.
Rebooting your iDevice
Hold down the Sleep (On-Off) and Home buttons together for about 10-15 seconds or until the Apple Logo appears - ignore the red slider if it appears - then let go of the buttons. The device should begin to start up.
Similar Messages
-
I tried to restore my ipod touch but it says it could not be and than an unknown error occured (3194) please help me!!
Fix Error 3194 from iTunes during iPhone restore
iPhone Error 3194 - How to Fix iTunes Error 3194?
iTunes: Specific update-and-restore error messages and advanced troubleshooting -
IPOD touch is disabled. Device will not allow me to enter a passcode or restore device through Itunes.
Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
Itunes still is not working correctly. There was a software update that i received yesterday and i figured it would fix the problem with itunes not responding, but it didn't. It's still doing the same thing. I'm getting kinda annoyed cause i use itunes as my main music player so please help me fix this software issue thanks!
Hi Batman1981,
It sounds like you may be describing an issue where a program that monitors the Winsock protocol for Windows is conflicting with iTunes and it's related components. Take a look at the article linked below, it provides suggestions that may resolve the issue.
Apple software on Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/ts4123
You may notice the following symptoms on your Windows PC after installing the iCloud Control Panel, iTunes 10.5 or later, or Safari 5.1 or later:
iTunes is slow to respond.
Windows is slow to respond.
iTunes stops responding when backing up or syncing with an iPhone, iPad, or iPod touch.
-Jason -
My mother set up iCloud on my iPod without my consent and she set it up so that I have all my little sister's apps, notes, pictures, and contacts. How can I get all my old information back without deleting all the stuff on her iPod 4th gen.? I already deleted the iCloud account. Do I have to reset anything in my settings? I do not want to start out fresh with all my info gone. I need my notes, pictures, and contacts soon! I really need help, please!!
You can import the photos to a coouter and sync them back to the restored iPod. However, they will be in a new album, not the Camera Roll album
You can email the Notes and then cut and paste them to Notes in the restored iPod
If you have app/Game data then
How to transfer game saves between iOS devices, without iTunes, and without jailbreaking | TUAW - The Unofficial Apple Weblog -
Alright, so my ipod touch stopped working, but I can still connect it to itunes, but my friend gave me his old nano. I was wondering how I could get my more updated songs from my ipod touch onto th nano. My laptop crashed whitch had all my new music, and im afraid if I sync my Ipod touch to the desktop with all my old songs, ill lose all my newer ones which I dont want to happen because I want them on my nano. Im sorry for the confusing topic im just so lost.
All you have to do is connect your new iPod to the computer that has the library for your old iPod.
When iTunes comes up, click on your new iPod under Devices.
At the top of the Summary Page click Music.
Click Synch Music.
Do the same thing for Photos, Apps, Movies and so on...
Now just synch the iPod. -
IPod touch stopped working when charging now won't turn on at all
iPod touch stopped working when charging now won't turn on at all
Try in order:
- After charging or half an hour, reset the iPod:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Connect the iPod to the computer and if it shows in iTunes, restore the iPod via iTunes.
- See if placing the iPod in recovory mode will allow iTunes to see the iPod so you can restore the iPod. For recovery mode see:
iPhone and iPod touch: Unable to update or restore
- Make an appointment at the Genius Bar of an Apple store since you likely have a hardware problem. -
IPod Touch stopped working and is in recovery mode. What to do?
My daughters iPod touch stopped working today. It has a picture of an USB cable pointing to the blue iTunes icon. IMac says it needs to be restored and I don't want to lose her content on the iPod. What to do?
You have to restore the iPod. That is the only way. Your iPod is sick.
-
My sons iPod touch stopped working, it won't charge in a docking station and the computer/itunes won't recognize it when connected. We have tried holding the power and home button at the same time for several seconds, and the screen still stays black. Thanks!
Hello skdog I possibly think your ipod touch is black because it has not charged. If your dock is broken it might just mean the dock will be broken and so might be the USB port. You should see an Apple shop nearby and hand it over and see what they can do. I hope this information works!
-
My ipod touch stopped working out of no where and now it wont turn on what should i do?
my ipod touch stopped working out of no where how do i turn it on?
Try a hard reset.
Basic troubleshooting steps.
17" 2.2GHz i7 Quad-Core MacBook Pro 8G RAM 750G HD 120G Vertex 3 SSD Boot HD -
HT1386 My ipod touch stopped working.
My ipod touch stopped working. I get the message connect to itunes but I cant because my ipod is locked with password. What can I do
Place the iPod in Recovery mode and connect to your computer and restore via iTunes.
Next try DFU mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings -
I was looking at some of my pictures on my Ipod Touch. It was on 20 percent battery and i turned it on to sleep mode to go do something for my mom. Once i came back and tried to unlock my ipod it would even turn on. I tried plugging it in to the computer and used many different ipod chargers. How do i get this to work? its only a year old, does it have anything to do with the battery? And if i reset it will the songs i purchased from my ipod still be on there?
Try here:
iOS: Not responding or does not turn on
The media should still be on the iPod. You can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
my ipod won't show up on my computer. I have another ipod touch, that works fine. What should I do? Do I need a different ipo usb cord for the nano?
iTunes never displays the iPod in the left pane?
iTunes is shipped with a "helper application" called the "iPod Service" that runs and is used by iTunes to communicate with the iPod device. This service may be disabled.
If your system is Microsoft Windows XP and you are logged in as an Administrator:
1. Quit iTunes and, if your iPod is currently connected to your computer, safely remove it using the system tray application to manage removable devices.
2. Right click on "My Computer"
3. Select "Manage"
4. In the "Computer Management" window, left pane (tree view), follow this path:
+Computer Management (local) > Services and Applications > Services+.
5. In the right pane, scroll down to "iPod Service" and double click it.
6. If the service is listed as "Disabled" and "Stopped," change to "Manual" and "Start" it. ("Manual" will cause it to start when iTunes starts and "Start" starts the service right now.)
7. Close "Computer Management"
8. Restart iTunes and wait for it to completely come up.
9. Reconnect your iPod.
Does your iPod show up in iTunes? -
My NEW ipod touch stopped sending and recieving messages!
My NEW ipod touch stopped sending and recieving messages even though I am connected to the internet and all other internet apps are working just fine. I am just replying to messages sent to me. Any suggestions as to the solution?
This one
http://www.apple.com/support/itunes/ -
Why has my iPod Touch stopped connecting to my WiFi?
Why has my iPod Touch stopped connecting to my WiFi?
It's been fine for the past 2 years but today, it's stopped. It was working this morning...
According to settings it has connected but I cannot access anything online and the internet icon is missing.
WiFi is working on my phone & laptop so it doesn't appear to be a problem with the router. Also I've just synced my iPod with iTunes, reset and restarted - still no luck.
Any suggstions?
ThanksDid you already try to reset the network settings in Settings/General/Reset?
More tips for Wi-Fi troubleshooting can be found here: iOS: Troubleshooting Wi-Fi networks and connections
Maybe you are looking for
-
Lock button no longer working properly
the button usualy didnt make much to press it. now its like its almost impossible to push it. you really have to hold it tightly to push the button. why is it like this? anyone else have this issue?
-
Tape management & initialization - BRBACKUP
Hi, We have ECC 6.0 with Oracle on AIX 5.3. I am taking backups onto tape using BRTools. The device file BRBackup recognizing is /dev/rmt0.1 First, I initialize the tape with the command: brbackup -i force -v <tape volume name> Then I will use BRTool
-
WUT-125 Webutil Error happens occasionally....
Hello, We are currently running OAS 10g (10.1.2) ti deliver a web-based Forms application to our users (some are onsite and some off-site). We use the WEBUTIL file transfer function CLIENT_TO_AS_WITH_PROGRESS to allow the users to upload their work (
-
Hi, I am running Data-Driven test on different machines with different input values in .CSV file in batch mode.we are facing following problem: Test not considering modified values in .CSV file until we recompile the test. Is there any way to avo
-
Is it possible to lock icons to specific desktops?
I am organizing my iMac with different desktops for different functions. I would like to lock appropriate icons (for programs and documents) to the appropriate desktop. Is this possible with Lion, or even with an add-on product (and if so, what is