My Ipod Touch turns off and on by itself.

I have had my ipod touch for a year almost. It a first generation. It works fine, but starting last night. My Ipod touch started to turn off and on by itself. Ive had no trouble with this Ipod.the software is up to date, very well maintained. Whats going on?

You should take it in to the apple store and have someone from the Genius bar help you. Hopefully your warranty is still good, cuz you could get it replaced.

Similar Messages

  • Why does my ipod touch turn off and not turn on for a while

    every once in a while my ipod touch turns off and wont turn back on for a day or two. So why does it do this, it is from over use of the ipod?

    Try the following fixes in order:
    - Reset:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Restore the iPod from backup via iTunes
    - Restore the iPOd to factory defaults/new iPod
    If yo still have the problem you likely have a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

  • Why does my ipod touch turn off and on when cropping pics

    why does my daughter's ipod touch power off and back on when she is cropping pictures? she has only had it about 5-6months - any suggestions other than the apple store? they weren't too helpful before with another ipod and it is a long drive

    Error 9
    This error occurs when the device unexpectedly loses its USB connection with iTunes. This can occur if the device is manually disconnected during the restore process. This issue can be resolved by performing USB troubleshooting, using a different USB dock-connector cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software.
    Did you try everything above, including trying on another computer? If so then
    Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • My ipod touch turns off and on all the time i cant charge it because after about 2 minutes it turns off PLEASE HELP!

    MY Ipod touch frequently turns on and off please help!!!

    Try connecting the iPod to its syncing computer and restoring the iPod.
    If you can't restore, see if resetting the iPod will allow a restore:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    If that was unsuccessfulm see if placing the iPod in recovery mode will allow a restore.  For recovery mode see:
    iPhone and iPod touch: Unable to update or restore

  • Why does my ipod touch turn off and back on repeatedly

    I've recently just sync'd my iPod Touch and shortly thereafter, the unit turns on, the "Apple" symbol appears, but then about 8-10 seconds later the screen flashes and it turns off. About 8-10 seconds later, it turns on. This behavior cycles repeatedly without any effect from manipulation of the "Home" or "on/off" buttons. It also makes no difference if plugged in using the A/C connector.

    Error 9
    This error occurs when the device unexpectedly loses its USB connection with iTunes. This can occur if the device is manually disconnected during the restore process. This issue can be resolved by performing USB troubleshooting, using a different USB dock-connector cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software.
    Did you try everything above, including trying on another computer? If so then
    Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • My ipod touch turned off and wont turn back on

    I was using my ipod touch then I locked it and in about 5 minutes I went back to use it and it wont turn on I have charged it and it wont show thats its connected to the computer either I got another one back for christmas and it did the exact same thing but lucky for me it was still under the store warrenty then was is causing this and can I fix it I thought they didnt break easily!

    It might have accidently gotten turned off. Try holding the power button until you see the apple logo.

  • HT203175 My iPod touch is off and I can't turn it on because when I try, it has the iTunes logo and a usb pointing to it...and when I connect it to my computer and try to open it to iTunes, it says I have to restore it, but I don't want to lose all my pic

    My iPod touch is off and wont turn on because it has the itunes logo and a usb pointing to it, so when i looked it up online, it says i have to restore it but i don't want to because i don't want to lose all my pictures. What can I do?

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • My ipod touch shut off and now it wont turn back on, how do i fix that?

    my ipod touch shut off and now it wont turn back on, how do i fix that?

    Hey lattifahfromny,
    Thanks for the question. Based on the information you have provided, the following resource may assist you:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Will not turn on, will not turn on unless connected to power, or unexpected power off
    1. Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
    My issue is still not resolved. What do I do next?
    Contact Apple Support.
    Thanks,
    Matt M.

  • IPod nano 3rd gen turnes off and on by itself

    I have a problem: my iPod nano 3rd generation turns off and on by itself every 5-7 seconds.
    How can I solve this problem?

    Is there a case around this iPod? It might be pushing on the touch wheel. Does it happen when you flick the lock switch? If so it seems like a restore is in order
    Try the 5 r's http://www.apple.com/support/ipod/five_rs/nano3gen/

  • My daughters iPod wont turn off and has a blank white screen. i tried to restore it to the original state and it is still the same. is this fixable? thank you for your help

    My daughters iPod wont turn off and has a blank white screen. i tried to restore it to the original state and it is still the same. is this fixable? thank you for your help

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar              

  • My IPOD NANO keeps turning off and on by itself

    My ipod keeps turning off and on. I don't know how to make it stop doing that? I can click through even start to listen to a song but then it cuts off and on and it just does that until the battery dies. Please help??

    sounds wierd. Try this:
    http://www.apple.com/support/ipod/five_rs/

  • My imac keeps turning off and restarting by itself

    My iMac keeps turning off and restarting by itself.  Any ideas why and how to fix it?  Thanks. 

    Hi ...
    Try Resetting the System Management Controller (SMC)

  • Why does my Ipad continue to turn off and on by itself

    I have an IPAD 2 and through out the day it continues to turn off and on by itself.   Can anyone help with this or give me suggestions on what to do.
    I have already updated it to the latest software. 

    (A) Reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.
    (B) Reset all settings
    Settings>General>Reset>Reset all settings
    Note: Data will not be affected but settings will be reset.

  • With firefox and IE9, computer turn off and closing bt itself

    With IE9 and Firefox, computer turn off and closing by itself

    I see two possible causes:
    * '''outdated graphics drivers:''' Try to [[Safe Mode|run Firefox in Safe Mode]] and, if it works, [[How do I upgrade my graphics drivers?|update your graphics drivers]] or [[How do I upgrade my graphics drivers?#w_turning-off-hardware-acceleration|turn-off HW acceleration]].
    * '''malware:''' [[Is my Firefox problem a result of malware#w_how-do-i-get-rid-of-malware|Check for malware]].
    Please [[Updating Firefox|update also Firefox]].

  • Why does my G5 turn off and on by itself?

    Why does my G5 turn off and on by itself?
    It also has a tendency to quit imovie alot I don't know if it is realted

    Hello! It's possible that a heat related event is shutting it down and if set to restart after a power failure could be the reason it restarts. There could also be other reasons. Tom

Maybe you are looking for

  • How do I retain the original file name when using Compressor?

    Hello, I am in the process of doing a batch export and would like to keep everything identical to the source material, including the name. There is quite a bit of footage so deleting the "-Apple ProRes 422 for Progressive material" addition can be ti

  • Best way to work between Motion and FCP

    I use Motion on occasion but always seem to run into a problem when I export projects to .mov files and import into FCP as the same. The files always show up in FCP but if I return back to Motion to edit the Motion Project I get an alert that say tha

  • Problem in using Office Control to launch ms word

    Hi Armin,                What u said is right, but the data type of both the attributes in view context and controller context are same (binary). I had placed all the code in component controller only and trying to assign the Byte array to controller

  • Premiere Elements 8 - pitch shifter is FUBAR

    Hi there, I'm running Premiere Elements 8 on XP.  Everything related to Premiere is on my C drive, which has 3.5g of RAM and 35.5g of free space on the drive. Lately, I have been trying to use the "Pitch Shifter" effect, and it is not working as it s

  • Make net price field in me12 modifiable.

    How to make net price field in me12 modifiable. I have screen Layout & Screen variant but didnt get any clue.