My ipod touch volume is messed up

every time that i use the volume slider on my 1st generation touch the volume stays the same and i can barley hear it PLEASE HELP I WANT MY MUSIC

bump

Similar Messages

  • Ipod Touch 4G sound messed up

    So my iPod Touch 4g is about 1.5 years old. There was a while where I wouldn't have earbuds or headphones, so I didn't listen to music for a while. Then I got my car that has an aux port. I plugged in my iPod and played music just fine. But, I just bought a pair of skull candies and when I plug them in and try to play music, the music sounds weird. Let's try Whistle by Flo Rida. Right now, in the beginning, I can hear the guitar, but the whistle is very faint and hard to hear. And the little bass beat in the back, I can't hear that at all. Flo Rida at first sounds just fine, but in the verses, His voice sounds monotone, but the background voices come through. The only part that sounds like it should is the "can you blow my whistle" part. Other than that, It's all messed up. I know it's not the earbuds, cause they work just fine in my laptop, same song, same iTunes library. In the settings on my iPod, I've got it set for no sound check, and no EQ.
    Now for the weird part, I can get it to sound just fine. All I have to do is go into the accessibility settings and change the balance to either the right or the left. and the second I take it off center, everything sounds fine. Sound's even coming out of both earbuds at the same time/volume (mono doesn't do this, it just gets extremely quiet). But there are songs that utilize both left and right channels, and changing the balance, makes it so I can only hear the left or right side of the song. That's not right. Changing the balance should make it so sound only comes from the left or right earbud, not left or right side of a song. Like in "Good Feeling" by Flo Rida 2:43 into the song, with the techno thing going on (my favorite part, I just like how they do it) I can only hear one side of it, out of both earbuds.
    I'm going to do a full restore on my iPod (haven't had the time to, and I really don't want to, as I don't want to lose anything.) and if that fixes anything, I'll post it. If I don't then feel free to post your own opinion, and I'll give it  a shot.

    - Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so.
    Try the following to rule out a software problem
    - Reset the iPod. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup
    - Restore to factory settings/new iPod.
    - Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
    Apple Retail Store - Genius Bar
    Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
    Apple - iPod Repair price
    A third-party place like the following will replace the jack for less. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
    Replace the jack yourself
    iPod Touch Repair – iFixit

  • IPod Touch Volume doesn't work!

    My iPod Touch 4G's volume doesn't work! When I increse it, it decreases automatically or, It stays for a while & it gets on 0 again!! What do I doo?

    Try the standard fixes in order:
    - Reset:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Restore from backup via iTunes
    - Restore to factory defaults/new iPod

  • My ipod touch wifi is messed up? or is it new update?

    My wifi for my ipod touch 4th gen only works when i have right next to my router and wont even get a signal if i move it over 10 feet from my router.  I have had my ipod for almost 1 year and just recently had this problem also my xbox and laptop can pick up wifi from anywhere in the house so i know there isn't a problem with my router.  Is there anything i can do to fix this or is my ipod just messed up and i need to get it replaced or is it the new update and some of you are also experincing this? please help.

    bump

  • My ipod touch music is messed up.. How do i fix it?!

    Hey. My ipod touch wont play some music tracks..They are songs that i ahve recently play before but now they wont play. The ipod will play some songs perfectly then not play others at all. It will say its playing but then wont play it will just sit there or it will say its playing one song then play another. And more stuff.

    You probably will need to take or send the iPad to Apple and pay for replacement. But tell us what you mean by "color is messed up" and perhaps there's a suggestion we can make short of replacement.
    Regards.
    P.S. The forum in which you originally posted (this thread may have been moved by the Hosts by the time you read this), the Using Apple Support Communities forum, is for questions about the forums themselves. You will usually get the quickest and most helpful responses if you ask in the forum for the product or service about which you need help.

  • 1st Gen IPod Touch Volume Controls won't come up after a few minutes

    I've got a first gen IPod touch and ever since I upgraded to the OS 3 family I've had a problem where after a few minutes of playing a video, if I tap the screen to bring up the volume controls, nothing happens. If I tap the screen in the first few minutes, the controls come up fine but after a few minutes a screen tap does nothing. Returning to the home screen and re-launching the video player didn't work either. I was turning the unit off and back on to correct the problem but after reading that a new "feature" of OS 3 pertained to volume control and headphone detection I tried a new tactic. When the volume controls would not display, I unplugged my headphones (the video paused when I did this) and plugged the headphones back in and the volume controls display auto-magically and would appear on with a screen tap for a few minutes then I was back in the same situation. Is there anyway a setting could be created to disable headphone detection and the "features" that it brings? The headphones work fine when the volume controls won't display so it doesn't feel like a headphone problem. Thanks.

    To The Apple Discussion Boards!
    Except for your keyboard & mouse, disconnect all devices from your computer & repair disk & permissions from your Tiger DVD.
    Repairing permissions from the Tiger DVD
    Boot up from your Tiger Install DVD while holding down the "c" key.
    Select the language you wish to use, and then choose "Disk Utility" from the menu bar.
    Your HD should appear in a panel on the left hand side of the window which opens. Select it and then click on the "repair disk" button in the right hand section of the window.
    If Disk First aid is able to complete the repair now click on the "Repair permissions" button.
    Once this process has been completed restart your computer.
    http://docs.info.apple.com/article.html?artnum=25751 About Disk Utility's Repair Disk Permissions feature

  • Why is my iPod Touch 4th generation messed up?

    My Ipod Touch is playing the music, but when I go to the music tab and select the "songs" tab, I've seen it has 985 songs, yet when a song is playing the song list changes when a song is playing saids I have 969, but on itunes I have 990. So what is going on with my iPod?

    I do not think the iPod is killing your USB port. the port/computer have overcurrent protection that prevents computer damage by a short in a USB device. If you have a short or other device problem causing the device to draw too much power, the computer will disable the port and you will get a messages saying the device is drawing too much power.
    SInce it happens with other cable, it has to be a problem with the iPod, likely the connector on the iPod.
    Make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar                                      

  • My iPod touch 4g is messed up.

    My iPod touch 4G has a problem.  I have 2 iPod Touches.  One is updated to ios 4.3.3 and the other one is an unknown software.  i cant get into it.  It wont "activate"  my other iPod had to be connected to the computer and this one does it wirelessly somehow.  It says:  "This device is not registered as part of the iPhone developer program.##br####br##If you are a member of the program, please register your device in @@url@@."
                   Please tell me whats wrong
                                       Devin Cox
                                            [email protected]

    Next try the remaining items of:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • Ipod Touch Volume control's decreasing by itself

    Ive just started to have a problem where the volume decreases right down to zero, when i try and slide it up it simply slides all teh wya back down! help please!!!!!!!!!!

    Odd problems like this are often resolved by Resetting or Restoring (which erases the Touch and puts the OS back on). If that doesn't fix it, try Restoring again but do not re-load your last backup (i.e. set it up as a new iPod).

  • Ipod touch volume control

    volume control stuck/ not working...nothing recently changed any suggestions?  I'm not tech savvy, am at work and son texed me about this prob with his IPOD.  He's  a bit challenged.

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up           
    - Restore to factory settings/new iOS device.
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar          

  • IPod Touch Volume Crackle Issue.

    Hello all, this is probably a silly question, but has anyone else experienced a kind of static crackling noise when they use the volume slider during playback on their touch? The faster you slide the volume slider up and down the faster the crackles are. It can also be heard using the side volume buttons. The weird thing is, it doesn't do it on every song, just select ones. It's a 4G 64gb model running ios 4.3.3. Some sites say it's normal, other don't, can anyone help?

    Donald, restoring doesn't fix hardware problems.
    If this is what i think it is; you probably dropped/sat on it and pushed down the volume down button hard, causing it to cause a internal problem.
    I suggest go to a apple store and solve this out if you still have your warranty.

  • IPod touch volume output not mirroring volume adjustments

    Hi. I got a new iPod and only after a few minutes of use, the volume functions are not working.
    The volume buttons on the side of the iPod are displaying the max volume I set but the actual volume output is the same. This is only happening when there is no music playing on my iPod. I tried system restores and resets - anything I could think of. Is there something wrong with my device?

    I tried factory restores many times and still no problems solved. I am located well away from an apple store so I organised a telephone appointment for tomorrow. Thanks for your contribution.

  • IPod touch volume problem

    my ipod does not have any problems that cannot be solved by turning it off and on again. However, the volume goes wired when i listen to music. Im just sitting there and listening to it and all of a sudden the volume turns up and when i try to turn it back down it goes up again. I turn it on and off and it is fine but it does seem to re occur. any suggestions?

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - If you are using a pair of headhones try another pair.
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up                                                                
    - Restore to factory settings/new iOS device.             
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar                                      

  • Ipod touch volume and lock buttons do the same thing

    whenever i press the volume up or lock button, my ipods volume goes up and it locks. also if i turn it off it only turns back on if i plug it into a computer. i dont know if i still have my warranty and i would like to know if its possible to fix, and how much it would cost

    dont have the warranty, its about 4 years old and i bought it last year from my niehbor. the buttons dont even work now! it was trying to turn off as i i had held the lock button in and now only the home and volume down buttons do anything -__-' any idea where i can get it fixed for a reasonable price???

  • All the apps on my new iPod touch 5 are messed up.

    On Instagram I can't post videos or pictures and it keeps telling me that all the posts are from 2h ago but when I look on my phone it says 1sec.It is doing this with Twitter and Vine app. I just got this iPod for my birthday so it's strange that my apps would be doing this. I have shut down my iPod multiple times and uninstalled the apps and turned off and on the wifi and nothing worked. I thought it was just an app problem but since it's happening with all of the apps I'm thinking it's my iPod can anyone help?

    Try the remaining items of:
    iOS: Troubleshooting applications purchased from the App Store
    Contact the developer/go to their support site if only one app.
    Restore from backup. See:
    iOS: How to back up
    Restore to factory settings/new iPod

Maybe you are looking for

  • Form printing problem

    Hi, I have used InDesign CS6 to create a user-fillable form and brought into Acrobat X Pro to implement field tab orders, etc. It's a basic form with a couple of radio button options, a pulldown menu, editable text fields and a Print button. Everythi

  • MIGO Goods receipt to Direct Sales PO  . Error M7018. Enter Storage Location

    Hi Gurus. I want to post Goods Receipt from Direct Sales Purcharse Order. In this document type isn't needed a Storage location , but MIGO displays Error M7018 ( Enter Stor. Location ). This error only happens in one of our company codes. I think is

  • File name truncation warning on Save for Web (For Macintosh browsers?) (CS2)

    Image (Line drawing). Save for Web (*gif). Receive following warning: "Some names of the files being saved will be truncated to 31 characters for compatibility with Macintosh browsers. To change your filename compatibility options, click the Optimize

  • Why is the headphone jack on the bottom?

    I was really excited for the iPhone 5 but now I don't think I'll be getting one.  For me, changing the location of the headphone jack is entirely unnecessary.  I've been reading up on this, and the only reason I can find for it is because people say

  • How can i print the description about the field?

    dear folks i want to develop a report in that i want to display all fields in MM03 for all views. there i want to display first Field description (not field name), then field value. ie, for MATNR: Material Number = xxxx (value) for SPART: Division =