My ipod touch was with the total black screen

mine ipod touch was with the total black screen, and itunes does not recognize it you not binding

Try holding down the on/off and home buttons at the same time until you see the Apple logo. 

Similar Messages

  • Since i have upgradet my ipod touch 3g with the new 5.0.1 version,  i can`t upload music or pictures or apps or anything else. the synchronize button is gray and allows nothing. the i tunes version is the 10.5.3 ... please help me!

    since i have upgradet my ipod touch 3g with the new 5.0.1 version,  i can`t upload music or pictures or apps or anything else. the synchronize button is gray and allows nothing. the i tunes version is  10.5.3 ... please help me!

    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    Finally, if the Restore doesn't work, let the battery drain completely.  Then recharge for at least an hour and Restore again.

  • I have a problem. I take photos with camera of my iPod touch 5 with the effects that comes in the iPod and now when I look to my photos I see that the effects go out and the photos looks like I didn´t put the effects. What is that? How can I solve it?

    I have a problem. I take photos with camera of my iPod touch 5 with the effects that comes in the iPod and now when I look to my photos I see that the effects go out and the photos looks like I didn´t put the effects. What is that? How can I solve it?

    Try:
    - Restore from backup. See:                                                
    iOS: How to back up                                                                                     
    - Restore to factory settings/new iOS device.             

  • My ipod touch 4 gen. has a black screen with a apple and under it is a load bar that is empty and wont load

    my ipod touch 4 gen. has a black screen with a apple and under it is a load bar that is empty and wont load

    Try here:
    iPhone and iPod touch: Frozen and unresponsive
    iPod touch: Hardware troubleshooting

  • Help! may Ipod touch froze with the itune/usb logo. I tried rebooting and nothing happens

    Help
       My Ipod touch froze with the itune/usb logo displayed on the device. I tried rebooting and nothing happens, can anyone help me?

    Try to connect the device in recovery mode using the instructions in this Apple support document and restore the device.
    iOS: Unable to update or restore
    B-rock

  • HT201335 does the Ipod touch work with the airplay mirroring

    Does the Ipod touch work with airplay mirroring?

    No. Only iPhone 4S and iPad (2nd or 3rd Gen) as it requires more processing power. You can still use airplay with your device though.

  • Will an iPod Touch work with the iPod Hi Fi???

    Hi
    I want to upgrade my iPod Classic to an iPod Touch and was wondering if the Touch will work okay with the Hi Fi???
    Thanks.

    i have both the ipod touch and the ipod hi fi (the discontinued one) and yeah they work great together.. too bad it seems that last software upgrades from Apple to the itouch removed its capacity to have the "speakers" settings tab in the main option menu =(

  • IPod Touch stuck with the Apple Logo

    Ok, So i just got a new iPod Touch 16G. As soon as I connected it to iTunes, it started syncing then it just froze up and said data could not be synced because the iPod is not connected. I ejected the iPod & restarted it, but it just shows the Apple logo. It wont do anything else. I updated the software, charged it, and tried connecting it again but it shows the same message after syncing about 100 songs.
    I've never even used it. Any idea what may be wrong with it?
    EDIT: It finished syncing all of my music. But after it disconects, it doesn't do anything. Just the Apple Logo.
    Message was edited by: adorkable_e

    What happens when you try to connect it to your iTunes library in Recovery Mode?  See this article for steps on how to put your iPod Touch into recovery mode.  Don't be afraid to try this more than once.
    http://support.apple.com/kb/ht1808
    B-rock

  • Is the latest ipod touch compatible with the 2011 Mitsubishi Lancer Ralliart?

    I recently replaced an older iPod touch with a new iPod touch. The older touch synced with my 2011 mitsubishi lancer. Granted it took the two awhile to communicate but they always synced. I just got the new iPod touch on Feb 3 and tried to sync it with my lancer. It actually syned very quickly and worked perfectly. After I came out of Best Buy to go home, I plugged the touch in again and this time it just said iPod loading..... After about 5 minutes I unhooked the iPod and went back to sirius. Now iPod loading is all I get now....

    Yes, it's compatible.  Try using Disk Utility to reformat the Nano to see if that helps.  Here are instructions on how to reformat your iPod using Disk Utility.
    How to Reformat Your iPod on a Mac
    B-rock

  • Does siri work with ipod touch 4g with the new update

    with the new update does the siri only work for the new 5th genration ipod touch, if so that is so unfair

    No
    Siri is available on iPhone 4S, iPhone 5, iPad (3rd generation), and iPod touch (5th generation) and requires Internet access. Cellular data charges may apply.
    http://www.apple.com/ios/whats-new/

  • Can i charle my iPod touch 4G with the ipad 4 charger of 12W with 1.X A of output?

    I'm recently buy an ipad and it has charger and I have an iPod touch 4G that doesn't have a normal charger and I see that the outputs between both chargers is deferent amp, can this damage my iPod touch if I charger with the 12W charger of the ipad?
    I'm searching in google but I'm not sure of the topics in other forums, the apple web page says that these adapter is compatible with all devices
    Here http://store.apple.com/mx/product/MD836E/A/adaptador-de-corriente-usb-de-12-w-de -apple?fnode=3c#overview

    The iPad charger will work fine. I use my iPad charger if it is more convenient.

  • Why don't the new 4th gen ipod touches come with the headphones with a mic?

    They came with the 3rd generation 32g & 64g ipod touches, why dont they come with the 4thgen ipod touches -___- Those headphones are expensive and i would like them to at least include a **** charger too.

    Probably because the earlier iPod Touchs did not have a built-in mic like the 4G does.

  • How can I tranfer pictures from my PC to my Ipod Touch 8G with the new version of Itunes?

    I have taken some pictures from my camera, & I downloaded them to my computer, but I dont know to to transfer them to my Ipod touch(8G). People have told me but they have they have the old version of Itunes, and I have the newest one. So please tell me how if you know. Thanks.

    Follow the instructions here:
    iPhone, iPad and iPod touch: Syncing photos via iTunes

  • When I try to restore my iPod touch 4g with the ios 5.1.1 downloaded on iTunes, I get either error 3194 or 16xx. How do I fix this? I'd rather not dish out $200 for a new iPod.

    Just tried restoring and it's stuck at "Preparing iPod for restore..." and the iPod is stuck on the connect to iTunes screen.

    The following provides instructions for resolving those errors.
    iTunes: Specific update-and-restore error messages and advanced troubleshooting

  • NOTHING i do to this Ipod touch is making the BLANK WHITE SCREEN go away......

    Please help! I now hook my ipod touch up to my P.C, and it is NOT RECOGNISING my ipod!! Heres the problem AGAIN, let me make myself a little more clear on WHAT a stupid thing i did earlier..... I receieved a message (ON MY IPOD)  saying a new version of I.O.S 6 is available, so it says I needed at least 50% charged, OR had to be plugged in, so I PLUGGED in, and hit the button to update to newest version, then did what I had to do, came BACK to the iPod at 30 min later, and the bar seemed to not be moving, and i had to go to work, so i FORCED A SHUT DOWN by holding the home and the top button together, as i normally would to shut the thing down if something was jammed or whatever....so I did that, and it came back on BY ITSELF with the apple sign, then 5minutes later, the blank screen came up, and NOW every single time I TRY shutting it down, it WON'T STAY OFF, it comes right back on to the apple sign, then back to blank screen every time, can't get it to stay off! And now when I hook to my PC, it's not recognizing the iPod, I don't know how to recover it, cuz the iPod WON'T STAY OFF for me to do it!! And another thing, i let the ipod die completely, then plugged it in to charge, then it came back on as usual by itself, and still done the same thing!! All because i stopped an update in the middle of it updating!! It seems as if i wiped it completely out! But theres gotta be a way to restore??? need to speak with someone on the phone, cuz I don't have the money to spend right now on an apple support person!

    Please please READ what I have written before u respond,PLEASE!!because I MANUALLY STOPPED THE UPDATE TO IOS 6 WHILE IT WAS IN THE MIDDLE OF UPDATING (by forcing shutdown in the middle of it all..) and when it turned back on it went right to the white blank screen and has been that way EVER SINCE!! i cannot put in recovery mode, cuz every single time I SHUT my ipod down (by holding the power, and home button at the same time till it shuts down...) it DOES NOT show me the slide bar to power off, and it immediately shuts down (goes black..) then immediately STARTS BACK UP BY ITSELF and shows the APPLE LOGO for about 5 minutes, then goes RIGHT BACK TO THE WHITE, BLANK SCREEN!!!! It will NOT STAY OFF, it WILL NOT SHOW ME THE SLIDE BAR TO POWER OFF MANUALLY, and when I force shutdown, it immediately comes BACK ON BY ITSELF!! And then nothing but white screen! My PC COMPUTER will NOT recognize the iPod as being plugged into USB on my computer for me to RECOVER this IPod, so I do not know what else to do???  I have updated to the latest version of iTunes, and STILL NOTHING!!! This is my kids iPod that I screwed up here, and I am very upset! It's a 4th gen, 32gb iPod touch that is NOT CHEAP at all, and I am freaking out man!!! What do I do?

Maybe you are looking for

  • How to load data from one Infocube to another request by request using DTP

    Hi All, I have a scenario where we are maintaining backup Infocube B for Infocube A.  User loads data from a flat file many times a day in different requests.  We need to maintain backup of the Infocube A on weekly basis.  i.e data to be refreshed wi

  • OBIEE 11g Unable to browse multiple value hierarchy for analysis.

    Hi All, We are using OBIEE 11g Value Hierarchy feature to display GL Segment Hierarchies. -     We have set the hierarchies to be Ragged and Skipped Levels in the RPD Business Model. -     We have dragged the hierarchies from Business Model to Presen

  • Report  all  z  tables  with  all  z  program containing these z tables

    Hi  Everyone, I  want  to  write a report  to  extract  all   z table   with  all   z  program  contained in these z tables  ex: The z table zxxxx  exist in program zxx1 , zxx2 and zxx3. Table                                    Program zxxxxx        

  • Unfair practice

    My problem seems to be all too familiar on here, I purchased a Iphone 4 cell phone on 09/15/11, I ordered it over the phone with a very professional representative and I had been told that I had the 30 day worry free to return my phone to exchange or

  • Place of Singleton class in OO Design

    Hi Can any body make me clear on, why we make use of Singleton Class and how it is related to Object Oriented world. Thanks, Prasanth