My ipod touch was working perfectly then when i update it it said i need to restore it then error 1602 comes out

my ipod tuch was working perfectly then when i update it it said i need to restore it then error 1602 comes out

Error 1600, 1601, 1602: Try the following steps to resolve this error:
Ensure proper USB isolation troubleshooting has been performed, and test with a known-good cable.
Follow the steps listed for Error 1604.
This error may be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.
Above from:
http://support.apple.com/kb/TS3694

Similar Messages

  • IPod Touch 3g worked perfectly up until recent update :(

    Greetings to all!
    My iPod touch was working perfectly and very smoothly until a recent update was suggested when I plugged it to my iTunes.  This update seemed to have ruined my iPod touch's smoothness. 
    I do not know why, but every time I go in to view my videos the unit either freezes up and automatically exits from video view mode or the viewing is stuttering and the stop, forward and rewind controls do no work or work with a great deal of hesitation and sometimes even no response or delayed response to my finger touch.
    Any reasons why this is happening?
    I have a 3g 64gb iPod touch and about half is still unused.
    Thank you kindly in advance for you assistance.
    Shakuhachi.

    Hi there,
    thanks for your help in the above matter.
    It took me a while to do all the above, and none of them seem to have worked!
    The video functions still do not operate smoothly!  The pause, and play still stutters too much.  I used to use my ipod for a quick presentations to prospects, but it just is more of a hassle to pull up a video and getting going!
    Any other suggestions?
    Much appreciate your help.
    Shakuhachi.

  • IPod touch was working fine, then next time will not power on. Just over a year old

    iPod touch was working fine, next time no power uo

    You should try doing a restore. A restore on your ipod touch will delete all it's storage and set it back to it's factory conditions but it should fix your problem. Before the restore, I suggest making a backup file for your ipod touch on itunes.
    To restore your ipod touch:
    1.Connect your ipod touch to your computer and open itunes if not already open.
    2.Select your ipod touch name in the devices section of the source pane.
    3.Click the restore option under the version section in the summary tab. An alert will pop up asking you if you really want to do this. To affirm, click restore.
    4.The restore process has now started.
    With  your ipod touch restored, you can resync it working fine.

  • My ipod won't show up on my computer. I have another ipod touch, that works fine. What should I do? Do I need a different ipo usb cord for the nano?

    my ipod won't show up on my computer. I have another ipod touch, that works fine. What should I do? Do I need a different ipo usb cord for the nano?

    iTunes never displays the iPod in the left pane?
    iTunes is shipped with a "helper application" called the "iPod Service" that runs and is used by iTunes to communicate with the iPod device. This service may be disabled.
    If your system is Microsoft Windows XP and you are logged in as an Administrator:
    1. Quit iTunes and, if your iPod is currently connected to your computer, safely remove it using the system tray application to manage removable devices.
    2. Right click on "My Computer"
    3. Select "Manage"
    4. In the "Computer Management" window, left pane (tree view), follow this path:
    +Computer Management (local) > Services and Applications > Services+.
    5. In the right pane, scroll down to "iPod Service" and double click it.
    6. If the service is listed as "Disabled" and "Stopped," change to "Manual" and "Start" it. ("Manual" will cause it to start when iTunes starts and "Start" starts the service right now.)
    7. Close "Computer Management"
    8. Restart iTunes and wait for it to completely come up.
    9. Reconnect your iPod.
    Does your iPod show up in iTunes?

  • I have an iphone 4s unlocked with att prepaid plan (non-contract), everything was working perfect BUT since i update to IOS6 i can not send MMS to anybody has Android, i went to att technical center they said only apple store can fix the problem, i went..

    I have an iphone 4s unlocked with att prepaid plan (non-contract), everything was working perfect BUT since i update to IOS6 i can not send MMS to anybody has Android, i went to att technical center they said only apple store can fix the problem, i went to Apple store MANY times they could not fix it, so they gave me a new iphone 4s and they said they fixed it but they did not,iam so mad that's not fair, can somebody help me please.

    The nice thing about owning this overpriced POS is that Apple not only doesn't support it, but also doesn't want to hear about anything negative regarding it.  So I spoke to the so-called "support" people at Apple who successfully screwed up my contacts beyond repair.  I got a nice email from Apple asking me to rate the support I got.  I was actually civil and described the issue tactfully.  What do I get in return?  Nothing.  Not a damned thing!!  You're luck you've got me by the short hairs on a 2 year contract but I'm still tempted to throw this POS through the front window of the nearest Apple store!!  Not only will I be replacing this phone with a competitive product but I won't be buying anymore Apple crap.  I guess when you con 27 million people into believing your rhetoric and sales lies, you don't have to care whether some customers get screwed or not.  I'll be going back to Verizon and threatening legal action if they don't take this electronic dung heap back but I'm sure the teams of lawyers Apple and Verizon have on staff have insured that I have no rights in this matter and you're free to screw me anytime you please.  Sad. I used to love Apple as a company and your products.  Now you're just another Microsoft with more trendy looking junk.  I've had it with you.  If any of your executives are brave enough to talk to me, please contact me at your convenience.

  • RESTORING: At the moment I am downloading a movie on the itunes store my 8GB ipod touch (not my computer) (which I have already paid for) and I need to restore my ipod.  Will restoring it stop/delete my downloading movie? what else does it delete?

    RESTORING: At the moment I am downloading a movie on the itunes store my 8GB ipod touch (not my computer) (which I have already paid for) and I need to restore my ipod.  Will restoring it stop/delete my downloading movie? what else does it delete?

    Try DFU mode and then restore
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       
    When you restore via iTunes iTunes will download the firmware(ipsw) file. It could be that the microwave damaged the iPod and iTunes does not know what it is.

  • IPOD TOUCH WIFI WORKING PERFECTLY FINE NOW IT DOESNT HELP PLEASE!

    i received the ipod touch for christmas and i tried EVERYTHING to get the wifi to work. ater three days of trying i gave up. it said i was connected completely but when i clicked on safari or anything else that needed to be connected to the internet it said it wasn't connect to the wifi. then on new years eve when i got home it started working out of the blue. since then i never changed anything with my router, or disconnected the wifi from the itouch. i went to the hospital a week or so later after the wifi was working, and connected to their wifi without a problem. when i came home from the hospital the problem with the wifi not connecting start again. its been over a week now and still no wifi connection. i wrote down everything that showed up on my wifi properties when it finally worked and enter everything EXACTLY how it was before and still no luck! ive tried everything and noone has answers for me! any help please!?!?
    oh and i also have a linksys router if that helps anyone out.
    Message was edited by: PAULTRAW

    Two easy things to try (assuming you have the wireless icon at the top left of the screen):
    1. When you get home, go to Settings > WiFi and turn off WiFi. Wait a few seconds and turn it back on. Try Safari then.
    If that doesn't do it,
    2. Open WiFi and tap on the right arrow next to your network name. Tap on DHCP, scroll down and tap on Renew Lease.
    If you don't have the WiFi connected signal, go to Settings > General > Reset > Reset Network Settings and tap that. AFter your Touch returns to normal, log into the network.

  • Ipod touch was working till i connected to itunes and now won't turn on

    I connected it and asked for me to authorize like sixty applications and every time i tried itunes timed out.While doing so it had the apple logo with the loading screen around it and after the third try the ipod became unresponsive.It will not turn on,or restore.I tried holding the two buttons for a full min but still nothing,please help...

    OK, problem solved.
    I didn't want to restore my iPod until I knew that it was something to do with my hard drive. Also I was a bit hesitant because the songs were playing fine on my iPod. It just wasn't being recognized by my computer when I connected it.
    However when I dropped by the Apple Store they were swamped with customers. I didn't get a chance to see anyone at the Genius Bar.
    So I decided to restore my iPod, even if it meant I would be losing all my songs.
    This is my 3rd iPod (my other ones broke) so I knew all about backing my songs onto a CD.
    After I restored it it was working fine!
    So I suggest all you people to BACK UP YOUR MUSIC.
    There were so many times when my iPod screwed up on my and I lost everything.

  • Ipod touch was working, shut down and will not power up

    Ipod was working. Went dead and will not power up. The unit was charged. I connect it to a charger and I get nothing. Tried the power and home button combo but the unit is not responding. It is less than 6 months old

    Try restoring the iPod via iTunes on your computer.  If iTunes does not see the iPod:
    - place the iPod in recovery mode.  See:
    iPhone and iPod touch: Unable to update or restore
    - If not successfull, try placing the iPod in DFU mode:
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

  • IPod touch not working after 5.0.1iOS update

    It seems like a lot of people are having issues after the new 5.0.1iOS update. I want to share my frustration and what problems I'm facing. After the update my ipod won't sync properly. It freezes my computer and then my computer shuts down everytime I have my ipod connected to my computer. My music and apps on my iPod are like ghosts they are visible but do NOT work after being pressed. I tried resetting the ipod, same problem. I uninstalled and reinstalled iTunes, same problem. There is only problems with my computer when the iPod is plugged into the computer and trying to update. I am so ANGRY because I love my iPod and I can't use it to listen to music or communicate with my family and friends. I hope Apple will help all of us soon and fix these HUGE bugs, and FAST.

    Have you tried the sandard fixes:
    - Reset. Nothing will be lost
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears
    - Retore from backup
    - Restore to factory defaults/new iPod.

  • How can I stop iOS3 iPod Touch v1 apps being removed when iTunes updates apps with iOS4   apps

    I have an iPhone 4 with iOS5 whilst my old iPod Touch Mk1 still runs on iOS3. My old iPod now rests in the handbag of my wife who will use the installed apps if she is near a wifi she can use. There is however an increasing problem in that wheras it is more than capable whilst running the old apps iTunes is automatically upgrading them as new versions are released and increasingly upgraded apps only support iOS4 +. The obvious answer of buying a new iPod does not compute, its a good iPod and despite years of regular use the battery life is more than reasonable and the iPod function wit h16gb is more than adequate so I refuse to commit it to the silicon graveyard yet ( i still run old G3 and G4 macs as servers and have an old Classic that still provides amusement at parties).
    If however this automatic upgrade and trashing of old apps continues it will not be long before one day we sync the ipod and find it wipes al lthe apps off as they are no longer iOS3 compatible. Anyone ever found a way to protect the apps of an iOS3 device whislst all ipods are synced from the same iTunes user account?

    There really is not god way.  Whatyou migh consider it sonnecting the iPod to a different computer and transfering purchases to the computer.  That way yu will still have the version of the apps that are compatible with the iPod.
    iTunes Store: Transferring purchases from your iPhone, iPad, or iPod to a computer
    At a later date if necessary you can delete the newer apps from the library of the syncing computer and put the older ones in and do what you want to the iPod.

  • I just registered my iPod Touch on iTunes, and now when I connect it to my computer it says there is an error and closes iTunes.  It worked fine before I registered it.

    It aso charges when I connect it to my computer, so the cable is fine.

    Actually I just tried doing it again and it seems to stop syncing when I states to sync photos to my ipod

  • I updated to ff8, my "live bookmark feed failed to load" now. It was working perfectly fine when I had ff7. Is it a bug in ff8? Should I revert back to ff7?

    I need the live bookmark feeds to work, why doesn't it work now in ff8?

    Try to remove the current Latest Headlines feed or the feed that gives the problem and create a new feed by visiting the feed location of that feed.
    You can visit http://fxfeeds.mozilla.com/en-US/firefox/headlines.xml
    * https://support.mozilla.com/kb/How+to+change+the+Latest+Headlines+feed

  • All my apple software on my windows vista has stopped working.I tryed to uninstalland reinstall but I get R6034 error.everything was working perfect untill latest itunes update.Can you folks help?Quicktime,itunes icloud apple update and apple moblesupport

    I am getting a microsft C++ dll is missing all after running latest update on dell vostro windows vista which was authorize as one of the devices I could use after buyig Ipad mini.Everything apple has stopped worng alone with the R6034 error apple mobledevice support isnt working or updates.All this from updating itune?I lost on this one folks,if any ideas I would be very gratefull Jamie ([email protected])

    Here is what worked for me:
      My usb hub, being usb2, was too fast. I moved the wire to a usb port directory on my pc. That is a usb1 port which is slow enough to run your snyc.

  • Firefox 4 was working normally but when I updated to 5 it does not load when I select ANY firefox icon from ANY menu?

    But when I load a second browser (like Chrome or Explorer) it will pop up two or three windows like they have loaded but do not show under open programs or on my desktop, this only happens with firefox and I've already uninstalled and reinstalled.
    I am running Windows 7 and have had no problems with firefox till now. Both my other browsers work normally. Though my tool bar in firefox has also disappeared and been stating it needs to be reinstalled

    The next step I would recommend is to do some troubleshooting(Safe Mode,Problematic Extensions etc) -
    https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes
    http://support.mozilla.com/en-US/kb/Troubleshooting%20plugins
    Just to make sure you can get started in Firefox Safe Mode - Hold the Shift key down as you double click on the Firefox icon, ignore the page that opens and Continue. Firefox isn't the only thing that has been updated and new conflicts and culprits can emerge.
    I would also recommend a search of your computer to make sure no residue of "Conduit" remains.

Maybe you are looking for

  • SquirrelMail Takes a long time to send mail

    Am running SquirrelMail 1.4.10a in Tiger Server. Users can login, receive mail, compose new mail, and read mail fine. My problem is when a user sends mail, it takes up to 45 secs to complete the send. The sent email will show up in the "Sent" folder

  • Inconsistent Multi-Pass

    I recently bought Multi-Passes for the Daily Show and the Colbert Report. They worked as expected for the first two episodes, but today only the Colbert Report downloaded. I received a notification e-mail only for the Colbert Report - however, the sa

  • Debuging procedures?

    How do you debug a creation/modification of a proc? Everytime when I encounter an error creating or modifying a proc I get the same old error: Warning: Procedure created with compilation errors. is there a log file, table or any place that I can look

  • Validation is not impacting at Posting as we have different  park and post

    Hi, I have made validation to restirct user not to post JV if the amount is more than 25 lakhs. We have given different authorization for posting and parking. So that I am trying put the validation at Tcode FV50.  But it is not restricting the user t

  • Disc stuck

    Hi, A disc is stuck in my iMac DVD drive. It will spin and sound like its about to eject but the disc will not come out. My iMac will read and play the disc but I just can't fully eject it. Any help is greatly appreciated.