My ipod touch won't go any further then the white screen with the apple on it

i went to erase my ipod and it erased and then restarted but when it restarted it only goes to the loading screen with the apple sign on it and even if i restart it it goes back to the same screen. pleas somby help me i ant afford a new one

iMac G5: Fails to startup
http://support.apple.com/kb/HT2173?viewlocale=en_US

Similar Messages

  • The FaceTime app on my iPod touch refuses to go any further than the email verification part of the setup process. It just goes back to the sign in screen every time. How can I fix this?

    My built in FaceTime app on my iPod touch will not proceed from the email verification step of the setup process. I have tried going into settings like app support showed but when I click FaceTime it just shows the sign in screen just like before and does the same thing. Please help me to fix this.

    See:
    iOS: Troubleshooting FaceTime and iMessage activation
    iOS: Troubleshooting FaceTime

  • Ipod touch won't turn on, just shows the apple logo - even when plugged into Itunes?

    I have an Ipod touch 8GB - it's virtually never been used. I have tried to charge it up but nothing happens - it just displays an apple logo. I have plugged it into Itunes but again nothing happens. Any ideas?
    Thanks K.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • I have a monthly subscription for PS and Lightroom. I upgraded to 5.7 this morning but not through CC as it wouldn't download. Now when Lightroom opens, it is asking whether I want to but or have a free 30 day trial and won't progress any further into the

    Help please? My first time on this forum so apologies if I boob in some way!
    I have a monthly subscription for PS and Lightroom.
    When I opened Lightroom this morning, it told me an upgrade was available through CC. I probably did something wrong, butI couldn't get it to download.
    I came on the forum and read a couple of discussions on your pages and found a reply that posted links to the pages where Lightroom 5.7 could be downloaded.
    I clicked the link and downloaded the update fine.
    However, now when Lightroom opens, it is asking whether I want to BUY or have a free 30 day trial and won't progress any further into the app.
    My CC icon reveals that my software is up to date but I can't get past this register screen, without selecting BUY or FREE 30 TRIAL .
    can anyone help please?

    Help please? My first time on this forum so apologies if I boob in some way!
    I have a monthly subscription for PS and Lightroom.
    When I opened Lightroom this morning, it told me an upgrade was available through CC. I probably did something wrong, butI couldn't get it to download.
    I came on the forum and read a couple of discussions on your pages and found a reply that posted links to the pages where Lightroom 5.7 could be downloaded.
    I clicked the link and downloaded the update fine.
    However, now when Lightroom opens, it is asking whether I want to BUY or have a free 30 day trial and won't progress any further into the app.
    My CC icon reveals that my software is up to date but I can't get past this register screen, without selecting BUY or FREE 30 TRIAL .
    can anyone help please?

  • How do you fix a jalibroken ipod touch gen 3?  My  itouch has the apple skull on the powering up screen and won't do anything.  Thanks-

    How do you fix a jalibroken ipod touch gen 3?  My  itouch has the apple skull on the powering up screen and won't do anything.  Thanks-

    Put it in DFU mode (Google it), and Restore it as new in iTunes.

  • I was gave an Apple iPod Touch that was disabled and I called the Apple Store and they emailed me what to do and I plugged my iPod up to the PC and now it's saying that the iPod is unable to be recognized and I don't know what to do now

    I was gave an Apple iPod Touch that was disabled and I called the Apple store and they emailed me how to fix it but now when i plug it up to the PC it's saying that the iPod is unable to be recognized and I don't know what to do?

    Not sure if this helps:-
    The music files, were they bought from your iTunes account or did someone gift them to you after buying from the iTunes account? If they are yours you can download them again if you clear or de-authorise the ipod, it has to be done by whoever gave you the ipod to do this (the registered  owner). If they were bought for you on another itunes account I don't think Apple let you use them as they are copyrighted and they don't belong to you, they belong to the person who bought them. If the music files where ripped from music cd's then click and drag them to a new folder on your desktop and have the person who gave you the ipod to de-authorise and unregister it. Then you re register it and put your files back from your desktop folder in your iTunes folder and synch. Hopefully that would work.  Any files which you did not buy, I would not know how get around this, best bet is to take it to you nearest Apple  Store and explain that they were gifted to you and ask how you can use them.  The best way to gift music files is to buy the gift tokens and give these. Hope above helps.

  • When i plug my Ipod touch 4th generation in it goes to the apple screen and then it will turn off and then back on to a solid blue screen.

    When i plug my Ipod touch 4th generation in it goes to the apple screen and then shuts off and then turns back on and goes to a solid blue screen.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • My mac won't boot up, just has a white screen with a blinking ? mark, any suggestions?

    my mac won't boot up, just has a white screen with a blinking ? mark, any suggestions?

    this usually means the software and hardware can't find each other for whatever reason the following article addresses this issue:
    http://support.apple.com/kb/TS1440
    can also do apple hardware test, following article on that:
    http://support.apple.com/kb/HT1509
    if you can't access the apple hardware test in the above article you can also do fsck command to check the hardware as well, following article tells how to do that:
    http://support.apple.com/kb/HT1782
    hopefully one of these articles helps w/ resolution!!

  • My iPod touch is not charging it only shows the apple symbol

    My iPod touch is not charging it only shows the apple symbol

    See the not-charging topic of:
    iPod touch: Hardware troubleshooting
    Have you tried another cable?
    Another charging source? Does iTunes see the iPod when you connect to your computer?
    Look at the dock connector on the iPod. Look for abnormalities like bent or corroded contacts, foreign material and cracked or broken plastic.
    - If not successful, time for an appointment at the Genius Bar of an Apple store.

  • My iPod touch 5th Gen. wont start up past the apple logo,ive tried holding the power button and the home button,and it wont start up. What do I do?!?!

    My iPod touch 5th Gen. wont start up past the apple logo,ive tried holding the power button and the home button,and it wont start up. What do I do?!?!

    Try the remaining items of:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • Ipod touch does not do anything stuck on the apple logo screen.

    ipod touch does not do anything stuck on the apple logo screen.

    You may need to hold the sleep/wake button and the home button until the apple logo appears. Or anther thing you can try is draining the battery until the battery is dead. That's what i tried and worked. You may need to do those things more than 2 times. OH anther thing is you can try connecting you ipod to your computer and see if it appears on itunes. If those don't work you can send it to apple. So that's what helped me I hope I answered your question.

  • HT1430 i updated my ipod touch and it is not functioning.  The apple logo blinks and it didin't turn off either.  Any help?

    i updated my ipod touch and it is not functioning.  The logo is blinking and it doesn't turn off either.  Any help?

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • Ipod Touch 1st Gen not starting up past the apple logo

    When I start it up i see the apple logo for about 15sec then it turns off. I've tried putting it into safe mode by holding the Power and Home button for 30sec but all it does is turn on and off twice then nothing happens.
    Any ideas on how to fix this?

    Hi,
    Would you please share you solution as I'm facing the same with my 1st Gen iPod Touch.
    PS: iTunes does not detect the iPod either.
    Thanks.

  • My laptop once turned on wont on any further than the apple logo

    My laptop once turned on won't go any further than apple logo

    Try starting your computer by holding down the command + R keys, then run disk utility on your hard drive. If you are running a version of Mac OS X 10.6 or lower you will need to try to start you MacBook with the original DVD. Take a look at this link, http://support.apple.com/kb/HT1782?viewlocale=en_US&locale=en_US

  • HT2101 My IPOD touch just died. It only shows the apple icon. What can I do?

    I was trying to upload a change to an app and my IPOD died. It shows the Apple logo and notheing else

    Hello Tolhurst,
    We have an iPod Touch assistant that should be helpful in getting your iPod Touch working again.
    Frozen or unresponsive iPod touch
    http://www.apple.com/support/ipodtouch/assistant/ipodtouch/
    If you continue to have trouble getting the iPod Touch working again, I'd recommend putting the device into recovery mode and attempting a restore that way.
    iOS: Unable to update or restore
    http://support.apple.com/kb/HT1808
    Cheers,
    Allen

Maybe you are looking for

  • SOAP attachment - module development?

    Hi, I have an IDOC -> SOAP scenario where I have to call a webservice that uses SOAP attachment. Example: <soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:ueb="IBrokerInterface">    <soapenv:Header/>    <soapenv:Body>

  • Happy Birthday from Apple! Heres your gift.... A dead macbook hard drive!

    Well i woke up this morning, the morning of my 31st birthday. As usual on a saturday i booted up my macbook and checked out the latest news etc etc etc. The laptop was running normally. An hour or so later after the macbook had been sat in one place

  • Default customer type not set by default

    hello, we are having and issue with the "customer type" not being set by default. When a new customer is created (when they make a purchase) I would like them to be set as "Retail Customer" as their customer type . I have set the default customer typ

  • CAD Agent Desktop - Making 2nd call to Back office staff

    Hi All, Does anyone have a solution to the following question from a customer? "Whilst an agent is talking to a caller, it would appear that the only option available to make a second call at the same time ie. in the case where a member of call centr

  • !! Help on OCIAttrGet() !!

    Hi, Can you please tell me how I can use OCIAttrGet() to get the rowid of the particular row fetched and subsequently bind it to an update statement. I am getting an Invalid rowid error However, if i select rowid in the select statement and bind this