My ipod touch wont connect to my computer via usb but will connect to a different computer and i can connect my ipod nano anyone know how to connect my ipod touch?

so the ipod connects to my brothers computer fine but it wont connect to myn... it doesnt show in my computer but when i plug it in and out it makes the little connect sound and it doesnt charge on my computer either,,, my ipod nano however connects fine to my computer fine.. any solutions?? please help

Try here. Look especially at the driver and service topics. The iPod touch uses different drivers thant the Nano
iOS: Device not recognized in iTunes for Windows

Similar Messages

  • I have just connected my computer to my iPad to import photos to my iPad and have imported the wrong ones and wish to delete them. Does anyone know how I do this please. I am a novice at this as I have ony just acquired my iPad,

    I have just connected my computer to my iPad to import photos to my iPad and have imported the wrong ones and wish to delete them. Does anyone know how I do this please. I am a novice at this as I have ony just acquired my iPad,

    Photos that were synced from your computer using iTunes can only be deleted by de-selecting them from the folder from where they were synced -  and then re-syncing.
    Connect the iPad to the computer and launch iTunes.
    Click on the iPad name on the left side under devices.
    Click on the Photos Tab on the right.
    Uncheck all of the albums that you want to remove under the Sync Photos From heading
    Click on Apply in the lower right corner of iTunes
    If you are using iTunes 11 and you can't see the sidebar go to View>Show Sidebar from the menu at the top.

  • My ipod 4g was working fine until i locked the screen but when i tried to turn it back on the screen stays black and its been 3 days. Does anyone know how i could fix this?

    my ipod 4g was working fine until i locked the screen but when i tried to turn it back on the screen stays black and its been 3 days. Does anyone know how i could fix this?

    - Charge the iPod for half an hour.  Then reset the iPod:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - if still not working, connect to your computer. If iTunes sees the iPod, restore the iPod.
    - If still problem, place the iPod in recovery mode and then try to restore the iPod.  For recovery mod see:
    iPhone and iPod touch: Unable to update or restore

  • My ipad 2 and iphone 4S won't connect to app store via wifi but will connect via 3g

    my ipad 2 and iphone 4S won't connect to app store via wifi but will connect via 3g - both are running 6.0.1 - I have tired several wifi networks but same result.

    Hi LandJ1980,
    I would recommend first trying these steps:
    iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
    http://support.apple.com/kb/HT1430
    If that does not work, this article has some additional ideas to try, even though you are only seeing this with the App Store:
    Can't connect to the iTunes Store
    http://support.apple.com/kb/ts1368
    Cheers!
    - Ari

  • I am having trouble connecting to wifi on my acer. Anyone know how to connect to wirless?

    I have tried everything to connect my acer to a wirless network. Does anyone know how to connect to a wirless network?

    Did you already try to reset the router?
    Did you reset the iPod by holding the sleep and home button until the Apple logo comes back again?
    Did you reset the network settings on your iPod in Settings/General/Reset?
    More tips here: iOS: Troubleshooting Wi-Fi networks and connections

  • Does anyone know how to connect an older 20" cinema display with the (ADC) adapter end and connect it to a MacBook Pro 17" 2008 model (DVI) ?????

    Does anyone know how to connect an older 20" cinema display with the (ADC) adapter end and connect it to a MacBook Pro 17" 2008 model (DVI) ?????

    I believe you naeed the Apple ADC to DVI adapter.

  • Cannot burn an iMovie project to a DVD because the computer can't find iDVD.  Anyone know how to accomplish this task.

    Cannot burn an iMovie project to a DVD because the computer can't find iDVD.  Anyone know how to accomplish this task.

    Macs don't come bundled with iDVD anymore. If you have an older Mac that came with an iLife disk, you can install iDVD from that.
    If your Mac didn't come with iDVD, you can still find iLife '11 disks in some stores.
    There are other programs that can create DVDs, but I've never used them. From what I've heard, they're not as good as iDVD.

  • Does anyone know how to connect wireless speakers with itunes through airplay?

    Does anyone know how to connect wireless speakers with itunes through airplay? I am not getting the airplay icon in itunes.

    JBL doesn't have any speakers called "Spiral" that I can find, but anyway, perhaps something in this Apple support article on AirPlay troubleshooting will help:
    http://support.apple.com/kb/TS4215
    Regards.

  • Does anyone know how to connect an iphone internet to a pc

    Does anyone know how tp connect an iphone to a pc for internet

    Read here:
    http://support.apple.com/kb/ht4517

  • Does anyone know how to connect an iphone bluetooth to a car builtin Kenwood DNX7100?

    Does anyone know how to connect an iphone bluetooth to a car builtin Kenwood DNX7100?

    Check the user instructions for the Kenwood.

  • Accidentally autosynced iPod and lost a bunch of music. Anyone know how to fix

    Accidentally autosynced iPod and lost a bunch of music. Anyone know how to fix this?

    Fix what?
    You cannot undo a sync.
    You can redownload some itunes purchases in some countries:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • HT201210 i have forgotten my password. does anyone know how to unlock my ipod?

    I have forgotten my password. Does anyone know how to unlock my ipod??

    Do as the manual says and restore the ipod.
    If you are unable to restore then read this:
    iOS: Unable to update or restore

  • TS2776 iPhone 5, Outlook 2013, Windows 7.0 64-bit.  Every time I connect my phone to my computer via USB, iTunes opens with the "accept our terms and service" then deselects the boxes checked under the INFO tab to sync my calendars, contacts...help?

    I am connecting my iPhone 5 to my Windows computer via USB.  This should open iTunes and start the sync process.  Instead of iTunes opening, I get the iTunes service agreement to which I must agree.  Then iTunes opens and begins to back up my phone.  It is syncing my photos and music (although the music thing is another nightmare), but under the "info" tab in iTunes, the boxes of which functions I want to sync are no longer selected.  Hence the computer and the phone are not sharing information.  When I select the functions I want to sync, I must either replace or merge.  If I replace, I lose the information I recently put into my phone.  If I choose to merge, then I have duplicates of everything.
    How can I resolve this problem? Why is iTunes acting like it doesn't know my phone?
    I'm using an iPhone 5 iOS 6.1.4, Windows 7 64-bit, Outlook 13, and the must current version of iTunes (because I've removed and reinstalled it twice already).
    Thanks for any help!
    Christine

    After you'd run the Configure Classic instance did you run in the statement as stated in 'Oracle® Fusion Middleware Installation Guide for Oracle Portal, Forms, Reports and Discoverer 11g Release 1 (11.1.1) Part Number E10421-05'?
    java -classpath ORACLE_HOME_DIR\discoverer\lib\disco-config.jar;ORACLE_HOME_DIR\oui\jlib\OraInstaller.jar;ORACLE_HOME_DIR\opmn\lib\iasprovision.jar -Djava.library.path=ORACLE_HOME_DIR\oui\lib\win32 oracle.disco.install.config.DiscoUtil -oraclehome ORACLE_HOME_DIR -tnsadmin TNS_ADMIN_DIR
    I've completed an installation with the same steps (although I ran the config.bat file in as_1/bin rather than from the program files list and also I've the jrockit jdk installed)
    I've found that this fails with the error;
    INFO: This tool works only on Windows Platform. Exiting the program
    Which is strange considering this is Windows Server 2008 R2 64-bit
    DISCO is running in the EM console but the URLs (as defined in the installation summary report) do not resolve properly. I was just interested to hear if you're installation was the same, this isn't the first installation I've done, they've all had a similar issue

  • Does anyone know how to connect there computer to the enternet using iphone

    I was wanting to know how to connect my computer to the internet using my iphone.

    You can't, not supported

  • Does anyone know how to connect to Bell South DSL under PPPoE?

    I am having problems connecting to the internet.I have Bell South DSL. I was using a Dell laptop which used a USB cable to connect to the internet. Now that I have my first Apple (Macbook) I have been told to use the Ethernet cable that Bell South gave me instead of the USB. (They gave me both and they are labled) But the Ethernet cable B.S. gave me doesnt seem to fit into any ports on my Macbook. Once I get that situated, I was told to set my settings to PPPoE. Does anyone know how to do this or have any suggestions to my cable problem? And how do I get to Tiger from my Macbook? I cannot seeem to find it. Any input is appreciated.

    Assuming "BellSouth" uses the same procedure as "SBCGlobal", which are now both ATT/Yahoo, as far as I know:
    Take router from box. Connect to power outlet and phone outlet.
    Take Ethernet cable, plug one end into the router's jack marked LAN, plug other end into your computer's Ethernet jack.
    Point your Web browser to 192.168.1.1 (enter this into your browser's address bar, actual address might vary, check your router's documentation.)
    A Web form will appear. Set router to PPPoE, if necessary. Enter the user name your ISP gave you. Enter the password.
    Watch all the lights on your router go green.
    Or, if the router is already set up, since you used it with your Dell laptop previously:
    Take Ethernet cable, plug one end into the router's jack marked LAN, plug other end into your computer's Ethernet jack. Done.
    The second from the left is your Ethernet jack:
    http://store.apple.com/Catalog/US/Images/mb-side-white-050906.jpg

Maybe you are looking for